📄 tlc5615.pin
字号:
-- Copyright (C) 1991-2004 Altera Corporation
-- Any megafunction design, and related netlist (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only
-- to program PLD devices (but not masked PLD devices) from Altera. Any
-- other use of such megafunction design, netlist, support information,
-- device programming or simulation file, or any other related documentation
-- or information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to the
-- intellectual property, including patents, copyrights, trademarks, trade
-- secrets, or maskworks, embodied in any such megafunction design, netlist,
-- support information, device programming or simulation file, or any other
-- related documentation or information provided by Altera or a megafunction
-- partner, remains with Altera, the megafunction partner, or their respective
-- licensors. No other licenses, including any licenses needed under any third
-- party's intellectual property, are provided herein.
--
-- This is a Quartus II output file. It is for reporting purposes only, and is
-- not intended for use as a Quartus II input file. This file cannot be used
-- to make Quartus II pin assignments - for instructions on how to make pin
-- assignments, please see Quartus II help.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
-- NC : No Connect. This pin has no internal connection to the device.
-- VCC_INT : Dedicated power pin, which MUST be connected to VCC (2.5V).
-- VCC_IO : Dedicated power pin, which MUST be connected to VCC (Refer to
-- the table below for voltage).
-- GND : Dedicated ground pin, which MUST be connected to GND.
-- GND+ : Unused input. This pin should be connected to GND. It may also
-- be connected to a valid signal on the board (low, high, or
-- toggling) if that signal is required for a different revision
-- of the design.
-- GND* : Unused I/O pin. This pin can either be left unconnected or
-- connected to GND. Connecting this pin to GND will improve the
-- device's immunity to noise.
------------------------------------------------------------------------------
Quartus II Version 4.2 Build 157 12/07/2004 SJ Full Version
CHIP "Tlc5615" ASSIGNED TO AN: EP1K100QC208-3
Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment
-------------------------------------------------------------------------------------------------------------
TCK : 1 : input : : : :
CONF_DONE : 2 : bidir : : : :
nCEO : 3 : output : : : :
TDO : 4 : output : : : :
VCC_IO : 5 : power : : 3.3V : :
GND : 6 : gnd : : : :
GND* : 7 : : : : :
GND* : 8 : : : : :
GND* : 9 : : : : :
GND* : 10 : : : : :
GND* : 11 : : : : :
GND* : 12 : : : : :
GND* : 13 : : : : :
GND* : 14 : : : : :
GND* : 15 : : : : :
GND* : 16 : : : : :
GND* : 17 : : : : :
GND* : 18 : : : : :
GND* : 19 : : : : :
GND : 20 : gnd : : : :
VCC_INT : 21 : power : : 2.5V : :
VCC_IO : 22 : power : : 3.3V : :
GND : 23 : gnd : : : :
GND* : 24 : : : : :
GND* : 25 : : : : :
GND* : 26 : : : : :
GND* : 27 : : : : :
GND* : 28 : : : : :
GND* : 29 : : : : :
GND* : 30 : : : : :
GND* : 31 : : : : :
GND : 32 : gnd : : : :
VCC_INT : 33 : power : : 2.5V : :
VCC_IO : 34 : power : : 3.3V : :
GND : 35 : gnd : : : :
GND* : 36 : : : : :
GND* : 37 : : : : :
GND* : 38 : : : : :
GND* : 39 : : : : :
GND* : 40 : : : : :
GND* : 41 : : : : :
VCC_IO : 42 : power : : 3.3V : :
GND : 43 : gnd : : : :
GND* : 44 : : : : :
GND* : 45 : : : : :
GND* : 46 : : : : :
GND* : 47 : : : : :
VCC_INT : 48 : power : : 2.5V : :
GND : 49 : gnd : : : :
TMS : 50 : input : : : :
TRST : 51 : input : : : :
nSTATUS : 52 : bidir : : : :
SIN : 53 : output : LVTTL/LVCMOS : : : Y
GND* : 54 : : : : :
SCL : 55 : output : LVTTL/LVCMOS : : : Y
GND* : 56 : : : : :
SNCS : 57 : output : LVTTL/LVCMOS : : : Y
GND* : 58 : : : : :
GND : 59 : gnd : : : :
GND* : 60 : : : : :
GND* : 61 : : : : :
GND* : 62 : : : : :
GND* : 63 : : : : :
GND* : 64 : : : : :
GND* : 65 : : : : :
VCC_IO : 66 : power : : 3.3V : :
GND* : 67 : : : : :
GND* : 68 : : : : :
GND* : 69 : : : : :
GND* : 70 : : : : :
GND* : 71 : : : : :
VCC_INT : 72 : power : : 2.5V : :
GND* : 73 : : : : :
GND* : 74 : : : : :
GND* : 75 : : : : :
GND : 76 : gnd : : : :
VCC_CKLK : 77 : power : : 2.5V : :
GND+ : 78 : : : : :
clk : 79 : input : LVTTL/LVCMOS : : : Y
GND+ : 80 : : : : :
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -