📄 travel.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.0 9/14/2000
-- Compiled: 12/23/2002 09:45:02
-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "travel"
BEGIN
DEVICE = "EP1K10TC100-3";
"clk" : INPUT_PIN = 99 ;
"sa" : INPUT_PIN = 98 ;
"sb" : INPUT_PIN = 97 ;
"a0" : OUTPUT_PIN = 20 ;
"a1" : OUTPUT_PIN = 21 ;
"a2" : OUTPUT_PIN = 22 ;
"ga" : OUTPUT_PIN = 96 ;
"gb" : OUTPUT_PIN = 94 ;
"ra" : OUTPUT_PIN = 86 ;
"rb" : OUTPUT_PIN = 85 ;
"seg0" : OUTPUT_PIN = 6 ;
"seg1" : OUTPUT_PIN = 7 ;
"seg2" : OUTPUT_PIN = 9 ;
"seg3" : OUTPUT_PIN = 13 ;
"seg4" : OUTPUT_PIN = 14 ;
"seg5" : OUTPUT_PIN = 15 ;
"seg6" : OUTPUT_PIN = 16 ;
"ya" : OUTPUT_PIN = 71 ;
"yb" : OUTPUT_PIN = 70 ;
"|CONTROLLER:28|LPM_ADD_SUB:586|addcore:adder|:63" : LOCATION = LC2_A12;
"|CONTROLLER:28|LPM_ADD_SUB:586|addcore:adder|:67" : LOCATION = LC3_A4 ;
"|CONTROLLER:28|LPM_ADD_SUB:696|addcore:adder|pcarry2" : LOCATION = LC5_A12;
"|CONTROLLER:28|LPM_ADD_SUB:1055|addcore:adder|pcarry2" : LOCATION = LC3_A20;
"|CONTROLLER:28|LPM_ADD_SUB:1055|addcore:adder|:63" : LOCATION = LC4_A12;
"|CONTROLLER:28|:30" : LOCATION = LC7_A4 ; -- |CONTROLLER:28|counter4
"|CONTROLLER:28|:31" : LOCATION = LC5_A4 ; -- |CONTROLLER:28|counter3
"|CONTROLLER:28|:32" : LOCATION = LC8_A4 ; -- |CONTROLLER:28|counter2
"|CONTROLLER:28|:33" : LOCATION = LC4_A4 ; -- |CONTROLLER:28|counter1
"|CONTROLLER:28|:34" : LOCATION = LC6_A4 ; -- |CONTROLLER:28|counter0
"|CONTROLLER:28|:35" : LOCATION = LC3_A8 ; -- |CONTROLLER:28|state1
"|CONTROLLER:28|:36" : LOCATION = LC5_A11; -- |CONTROLLER:28|state0
"|CONTROLLER:28|:37" : LOCATION = LC6_A9 ; -- |CONTROLLER:28|leda2
"|CONTROLLER:28|:38" : LOCATION = LC1_A8 ; -- |CONTROLLER:28|leda1
"|CONTROLLER:28|:39" : LOCATION = LC4_A21; -- |CONTROLLER:28|leda0
"|CONTROLLER:28|:40" : LOCATION = LC8_A8 ; -- |CONTROLLER:28|ledb2
"|CONTROLLER:28|:41" : LOCATION = LC2_A8 ; -- |CONTROLLER:28|ledb1
"|CONTROLLER:28|:42" : LOCATION = LC6_A20; -- |CONTROLLER:28|ledb0
"|CONTROLLER:28|:43" : LOCATION = LC7_A12; -- |CONTROLLER:28|Num14
"|CONTROLLER:28|:44" : LOCATION = LC3_A12; -- |CONTROLLER:28|Num13
"|CONTROLLER:28|:45" : LOCATION = LC8_A21; -- |CONTROLLER:28|Num12
"|CONTROLLER:28|:46" : LOCATION = LC1_A21; -- |CONTROLLER:28|Num11
"|CONTROLLER:28|:47" : LOCATION = LC7_A8 ; -- |CONTROLLER:28|Num10
"|CONTROLLER:28|:48" : LOCATION = LC4_A20; -- |CONTROLLER:28|Num24
"|CONTROLLER:28|:49" : LOCATION = LC8_A20; -- |CONTROLLER:28|Num23
"|CONTROLLER:28|:50" : LOCATION = LC5_A20; -- |CONTROLLER:28|Num22
"|CONTROLLER:28|:51" : LOCATION = LC1_A20; -- |CONTROLLER:28|Num21
"|CONTROLLER:28|:52" : LOCATION = LC2_A20; -- |CONTROLLER:28|Num20
"|CONTROLLER:28|:53" : LOCATION = LC3_A19; -- |CONTROLLER:28|Num32
"|CONTROLLER:28|:54" : LOCATION = LC5_A19; -- |CONTROLLER:28|Num31
"|CONTROLLER:28|:55" : LOCATION = LC6_A8 ; -- |CONTROLLER:28|Num30
"|CONTROLLER:28|:57" : LOCATION = LC3_A11; -- |CONTROLLER:28|cnt
"|CONTROLLER:28|~735~1" : LOCATION = LC6_A12;
"|CONTROLLER:28|:813" : LOCATION = LC8_A11;
"|CONTROLLER:28|:831" : LOCATION = LC2_A11;
"|CONTROLLER:28|:910" : LOCATION = LC8_A12;
"|CONTROLLER:28|:1092" : LOCATION = LC1_A12;
"|CONTROLLER:28|:1225" : LOCATION = LC6_A11;
"|CONTROLLER:28|:1288" : LOCATION = LC1_A11;
"|CONTROLLER:28|:1487" : LOCATION = LC5_A8 ;
"|CONTROLLER:28|:1503" : LOCATION = LC4_A8 ;
"|CONTROLLER:28|~1530~1" : LOCATION = LC2_A4 ;
"|CONTROLLER:28|~1554~1" : LOCATION = LC1_A4 ;
"|CONTROLLER:28|:1803" : LOCATION = LC7_A11;
"|CONTROLLER:28|:1827" : LOCATION = LC4_A11;
"|CONTROLLER:28|:2058" : LOCATION = LC3_C6 ;
"|CONTROLLER:28|:2060" : LOCATION = LC1_C8 ;
"|CONTROLLER:28|:2093" : LOCATION = LC5_C8 ;
"|CONTROLLER:28|:2136" : LOCATION = LC6_C8 ;
"|CONTROLLER:28|:2200" : LOCATION = LC8_C9 ;
"|CONTROLLER:28|~2200~1" : LOCATION = LC3_C3 ;
"|CONTROLLER:28|:2211" : LOCATION = LC5_C9 ;
"|CONTROLLER:28|~2211~1" : LOCATION = LC7_C8 ;
"|CONTROLLER:28|:2222" : LOCATION = LC6_C9 ;
"|CONTROLLER:28|~2222~1" : LOCATION = LC3_C9 ;
"|CONTROLLER:28|:2233" : LOCATION = LC2_C9 ;
"|CONTROLLER:28|~2233~1" : LOCATION = LC4_C8 ;
"|CONTROLLER:28|~2255~1" : LOCATION = LC5_C3 ;
"|CONTROLLER:28|:2266" : LOCATION = LC8_C8 ;
"|CONTROLLER:28|:2277" : LOCATION = LC1_C12;
"|CONTROLLER:28|:2431" : LOCATION = LC4_C3 ;
"|CONTROLLER:28|~2455~1" : LOCATION = LC5_C4 ;
"|CONTROLLER:28|:2485" : LOCATION = LC7_C4 ;
"|CONTROLLER:28|~2485~1" : LOCATION = LC2_C4 ;
"|CONTROLLER:28|:2503" : LOCATION = LC2_C3 ;
"|CONTROLLER:28|:2509" : LOCATION = LC4_C9 ;
"|CONTROLLER:28|:2523" : LOCATION = LC7_C9 ;
"|CONTROLLER:28|~2595~1" : LOCATION = LC1_C10;
"|CONTROLLER:28|~2617~1" : LOCATION = LC4_C6 ;
"|CONTROLLER:28|~2628~1" : LOCATION = LC6_C10;
"|CONTROLLER:28|:2650" : LOCATION = LC1_C3 ;
"|CONTROLLER:28|~2661~1" : LOCATION = LC3_C12;
"|CONTROLLER:28|~2672~1" : LOCATION = LC6_C3 ;
"|CONTROLLER:28|:2850" : LOCATION = LC6_C6 ;
"|CONTROLLER:28|~2850~1" : LOCATION = LC4_C7 ;
"|CONTROLLER:28|:2868" : LOCATION = LC7_C6 ;
"|CONTROLLER:28|~2880~1" : LOCATION = LC8_C6 ;
"|CONTROLLER:28|:2898" : LOCATION = LC3_C8 ;
"|CONTROLLER:28|:2904" : LOCATION = LC2_C7 ;
"|CONTROLLER:28|:2910" : LOCATION = LC3_C7 ;
"|CONTROLLER:28|:2916" : LOCATION = LC5_C7 ;
"|CONTROLLER:28|:2990" : LOCATION = LC8_C7 ;
"|CONTROLLER:28|:3001" : LOCATION = LC6_C7 ;
"|CONTROLLER:28|~3012~1" : LOCATION = LC2_C8 ;
"|CONTROLLER:28|~3045~1" : LOCATION = LC6_C12;
"|CONTROLLER:28|:3221" : LOCATION = LC1_C4 ;
"|CONTROLLER:28|~3245~1" : LOCATION = LC7_C10;
"|CONTROLLER:28|:3263" : LOCATION = LC8_C10;
"|CONTROLLER:28|:3275" : LOCATION = LC4_C10;
"|CONTROLLER:28|~3275~1" : LOCATION = LC4_C12;
"|CONTROLLER:28|:3293" : LOCATION = LC5_C12;
"|CONTROLLER:28|:3299" : LOCATION = LC7_C12;
"|CONTROLLER:28|:3307" : LOCATION = LC2_C12;
"|CONTROLLER:28|:3313" : LOCATION = LC7_C7 ;
"|CONTROLLER:28|:3370" : LOCATION = LC6_C14;
"|CONTROLLER:28|:3371" : LOCATION = LC3_C10;
"|CONTROLLER:28|:3373" : LOCATION = LC7_C14;
"|CONTROLLER:28|:3381" : LOCATION = LC5_C10;
"|CONTROLLER:28|:3383" : LOCATION = LC4_C4 ;
"|CONTROLLER:28|:3388" : LOCATION = LC6_C4 ;
"|CONTROLLER:28|:3389" : LOCATION = LC1_C6 ;
"|CONTROLLER:28|~3389~1" : LOCATION = LC2_C10;
"|CONTROLLER:28|:3391" : LOCATION = LC8_C4 ;
"|CONTROLLER:28|:3397" : LOCATION = LC1_C7 ;
"|CONTROLLER:28|:3400" : LOCATION = LC1_C9 ;
"|CONTROLLER:28|:3408" : LOCATION = LC4_A18;
"|CONTROLLER:28|:3449" : LOCATION = LC1_A14;
"|CONTROLLER:28|:3469" : LOCATION = LC2_A22;
"|CONTROLLER:28|~3469~1" : LOCATION = LC3_A22;
"|CONTROLLER:28|~3604~1" : LOCATION = LC7_A13;
"|CONTROLLER:28|:3615" : LOCATION = LC6_A22;
"|CONTROLLER:28|~3626~1" : LOCATION = LC4_A22;
"|CONTROLLER:28|:3780" : LOCATION = LC5_A22;
"|CONTROLLER:28|~3804~1" : LOCATION = LC1_A13;
"|CONTROLLER:28|:3833" : LOCATION = LC2_A15;
"|CONTROLLER:28|~3834~1" : LOCATION = LC7_A22;
"|CONTROLLER:28|:3852" : LOCATION = LC2_A13;
"|CONTROLLER:28|:3858" : LOCATION = LC7_A14;
"|CONTROLLER:28|:3870" : LOCATION = LC8_A14;
"|CONTROLLER:28|~3955~1" : LOCATION = LC1_A22;
"|CONTROLLER:28|~3966~1" : LOCATION = LC4_A13;
"|CONTROLLER:28|~3999~1" : LOCATION = LC8_A22;
"|CONTROLLER:28|~4010~1" : LOCATION = LC8_A13;
"|CONTROLLER:28|~4021~1" : LOCATION = LC6_A13;
"|CONTROLLER:28|:4175" : LOCATION = LC3_A18;
"|CONTROLLER:28|~4199~1" : LOCATION = LC5_A18;
"|CONTROLLER:28|:4217" : LOCATION = LC5_A13;
"|CONTROLLER:28|:4228" : LOCATION = LC7_A18;
"|CONTROLLER:28|~4229~1" : LOCATION = LC3_A13;
"|CONTROLLER:28|:4247" : LOCATION = LC3_A14;
"|CONTROLLER:28|:4253" : LOCATION = LC4_A14;
"|CONTROLLER:28|:4259" : LOCATION = LC5_A14;
"|CONTROLLER:28|:4265" : LOCATION = LC6_A14;
"|CONTROLLER:28|:4334" : LOCATION = LC4_A15;
"|CONTROLLER:28|:4335" : LOCATION = LC6_A18;
"|CONTROLLER:28|:4343" : LOCATION = LC3_A15;
"|CONTROLLER:28|:4344" : LOCATION = LC1_A18;
"|CONTROLLER:28|:4351" : LOCATION = LC2_A14;
"|COUNT8:2|:5" : LOCATION = LC5_C23; -- |COUNT8:2|qc12
"|COUNT8:2|:6" : LOCATION = LC4_C23; -- |COUNT8:2|qc11
"|COUNT8:2|:7" : LOCATION = LC2_C14; -- |COUNT8:2|qc10
"|DECODE8:30|~274~1" : LOCATION = LC7_C20;
"|DECODE8:30|:298" : LOCATION = LC8_C21;
"|DECODE8:30|~298~1" : LOCATION = LC6_C20;
"|DECODE8:30|~310~1" : LOCATION = LC1_C21;
"|DECODE8:30|:334" : LOCATION = LC5_C21;
"|DECODE8:30|:358" : LOCATION = LC7_C17;
"|DECODE8:30|:361" : LOCATION = LC4_C21;
"|DECODE8:30|~361~1" : LOCATION = LC4_C17;
"|DECODE8:30|:370" : LOCATION = LC6_C17;
"|DECODE8:30|:382" : LOCATION = LC3_C17;
"|DECODE8:30|~382~1" : LOCATION = LC3_C20;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -