fuza01.rpt

交通灯控制程序.实现十字路口的交通灯控制.使用vhdl编写,使用方便.

-- Node name is ':408' 
-- Equation name is '_LC7_F9', type is buried 
_LC7_F9  = LCELL( _EQ011);
  _EQ011 = !state0 &  state2
         # !state1 &  state2
         #  _LC7_F3 &  state0 &  state1 & !state2
         # !_LC7_F3 &  state2;

-- Node name is ':414' 
-- Equation name is '_LC4_F9', type is buried 
_LC4_F9  = LCELL( _EQ012);
  _EQ012 =  _LC7_F3 &  state0 & !state1
         # !state0 &  state1
         # !_LC7_F3 &  state1;

-- Node name is '~480~1' 
-- Equation name is '~480~1', location is LC6_F3, type is buried.
-- synthesized logic cell 
_LC6_F3  = LCELL( _EQ013);
  _EQ013 =  count3
         # !state2
         #  state0
         #  state1;

-- Node name is ':480' 
-- Equation name is '_LC5_F3', type is buried 
!_LC5_F3 = _LC5_F3~NOT;
_LC5_F3~NOT = LCELL( _EQ014);
  _EQ014 =  _LC6_F3
         #  count2
         # !count1
         #  count0;

-- Node name is ':562' 
-- Equation name is '_LC6_F9', type is buried 
_LC6_F9  = LCELL( _EQ015);
  _EQ015 = !count3 &  state2
         # !state0 &  state2
         # !state1 &  state2
         #  count3 &  state0 &  state1 & !state2;

-- Node name is ':568' 
-- Equation name is '_LC3_F9', type is buried 
_LC3_F9  = LCELL( _EQ016);
  _EQ016 =  count3 &  state0 & !state1
         # !state0 &  state1
         # !count3 &  state1;

-- Node name is '~629~1' 
-- Equation name is '~629~1', location is LC3_F2, type is buried.
-- synthesized logic cell 
_LC3_F2  = LCELL( _EQ017);
  _EQ017 =  count3 & !state0
         # !count3 &  state0;

-- Node name is ':672' 
-- Equation name is '_LC8_F9', type is buried 
_LC8_F9  = LCELL( _EQ018);
  _EQ018 = !_LC5_F3 &  _LC6_F4 &  _LC6_F9
         # !_LC6_F4 &  _LC7_F9;

-- Node name is ':678' 
-- Equation name is '_LC5_F9', type is buried 
_LC5_F9  = LCELL( _EQ019);
  _EQ019 =  _LC3_F9 & !_LC5_F3 &  _LC6_F4
         #  _LC4_F9 & !_LC6_F4;

-- Node name is '~696~1' 
-- Equation name is '~696~1', location is LC6_F10, type is buried.
-- synthesized logic cell 
_LC6_F10 = LCELL( _EQ020);
  _EQ020 = !_LC6_F4 & !_LC7_F3
         # !count3 & !_LC5_F3 &  _LC6_F4;

-- Node name is '~753~1' 
-- Equation name is '~753~1', location is LC8_F10, type is buried.
-- synthesized logic cell 
_LC8_F10 = LCELL( _EQ021);
  _EQ021 =  state0 &  state2
         #  state1 &  state2
         #  _LC7_F3 & !state0 & !state2;

-- Node name is '~1095~1' 
-- Equation name is '~1095~1', location is LC2_F2, type is buried.
-- synthesized logic cell 
_LC2_F2  = LCELL( _EQ022);
  _EQ022 =  state2
         #  state0 &  state1;

-- Node name is '~1095~2' 
-- Equation name is '~1095~2', location is LC1_F4, type is buried.
-- synthesized logic cell 
_LC1_F4  = LCELL( _EQ023);
  _EQ023 =  state2
         #  state0 &  state1;

-- Node name is '~1095~3' 
-- Equation name is '~1095~3', location is LC1_F2, type is buried.
-- synthesized logic cell 
_LC1_F2  = LCELL( _EQ024);
  _EQ024 =  state2
         #  state0 &  state1;

-- Node name is ':1095' 
-- Equation name is '_LC4_F4', type is buried 
_LC4_F4  = LCELL( _EQ025);
  _EQ025 =  state2
         #  state0 &  state1;

-- Node name is '~1155~1' 
-- Equation name is '~1155~1', location is LC6_F2, type is buried.
-- synthesized logic cell 
_LC6_F2  = LCELL( _EQ026);
  _EQ026 =  state0 & !state1 & !state2
         # !state0 &  state1 & !state2;

-- Node name is '~1155~2' 
-- Equation name is '~1155~2', location is LC3_F4, type is buried.
-- synthesized logic cell 
_LC3_F4  = LCELL( _EQ027);
  _EQ027 =  state0 & !state1 & !state2
         # !state0 &  state1 & !state2;

-- Node name is '~1155~3' 
-- Equation name is '~1155~3', location is LC5_F4, type is buried.
-- synthesized logic cell 
_LC5_F4  = LCELL( _EQ028);
  _EQ028 =  state0 & !state1 & !state2
         # !state0 &  state1 & !state2;

-- Node name is ':1155' 
-- Equation name is '_LC7_F4', type is buried 
_LC7_F4  = LCELL( _EQ029);
  _EQ029 =  state0 & !state1 & !state2
         # !state0 &  state1 & !state2;

-- Node name is ':1489' 
-- Equation name is '_LC8_F3', type is buried 
_LC8_F3  = LCELL( _EQ030);
  _EQ030 =  count3
         #  count1 & !count2
         # !count1 &  count2
         # !count0 &  count1
         # !count0 &  count2;

-- Node name is ':1514' 
-- Equation name is '_LC1_F3', type is buried 
_LC1_F3  = LCELL( _EQ031);
  _EQ031 = !count1 &  count2
         #  count3
         # !count0 & !count1
         # !count0 &  count2;

-- Node name is ':1541' 
-- Equation name is '_LC2_F3', type is buried 
_LC2_F3  = LCELL( _EQ032);
  _EQ032 =  count3
         # !count0 &  count1
         # !count0 & !count2;

-- Node name is ':1568' 
-- Equation name is '_LC4_F3', type is buried 
_LC4_F3  = LCELL( _EQ033);
  _EQ033 =  count3
         # !count0 &  count1
         # !count0 & !count2
         #  count1 & !count2
         #  count0 & !count1 &  count2;

-- Node name is ':1622' 
-- Equation name is '_LC5_F2', type is buried 
_LC5_F2  = LCELL( _EQ034);
  _EQ034 =  count3
         # !count2
         #  count0 &  count1
         # !count0 & !count1;

-- Node name is ':1649' 
-- Equation name is '_LC3_F3', type is buried 
_LC3_F3  = LCELL( _EQ035);
  _EQ035 =  count3
         #  count1
         #  count0 &  count2
         # !count0 & !count2;

-- Node name is ':1862' 
-- Equation name is '_LC8_F4', type is buried 
_LC8_F4  = LCELL( _EQ036);
  _EQ036 =  clk & !state0 & !state2;

-- Node name is ':1935' 
-- Equation name is '_LC7_F2', type is buried 
_LC7_F2  = LCELL( _EQ037);
  _EQ037 =  clk &  state2
         #  clk & !state0 & !state1;

-- Node name is ':2008' 
-- Equation name is '_LC4_F2', type is buried 
_LC4_F2  = LCELL( _EQ038);
  _EQ038 =  clk & !state0 & !state2;

-- Node name is ':2081' 
-- Equation name is '_LC2_F4', type is buried 
_LC2_F4  = LCELL( _EQ039);
  _EQ039 =  clk &  state2
         #  clk & !state0 & !state1;



Project Information                                 h:\jiaotongdeng\fuza01.rpt

** COMPILATION SETTINGS & TIMES **

Processing Menu Commands
------------------------

Design Doctor                             = off

Logic Synthesis:

   Synthesis Type Used                    = Multi-Level

   Default Synthesis Style                = NORMAL

      Logic option settings in 'NORMAL' style for 'FLEX10K' family

      CARRY_CHAIN                         = ignore
      CARRY_CHAIN_LENGTH                  = 32
      CASCADE_CHAIN                       = ignore
      CASCADE_CHAIN_LENGTH                = 2
      DECOMPOSE_GATES                     = on
      DUPLICATE_LOGIC_EXTRACTION          = on
      MINIMIZATION                        = full
      MULTI_LEVEL_FACTORING               = on
      NOT_GATE_PUSH_BACK                  = on
      REDUCE_LOGIC                        = on
      REFACTORIZATION                     = on
      REGISTER_OPTIMIZATION               = on
      RESYNTHESIZE_NETWORK                = on
      SLOW_SLEW_RATE                      = off
      SUBFACTOR_EXTRACTION                = on
      IGNORE_SOFT_BUFFERS                 = on
      USE_LPM_FOR_AHDL_OPERATORS          = off

   Other logic synthesis settings:

      Automatic Global Clock              = on
      Automatic Global Clear              = on
      Automatic Global Preset             = on
      Automatic Global Output Enable      = on
      Automatic Fast I/O                  = off
      Automatic Register Packing          = off
      Automatic Open-Drain Pins           = on
      Automatic Implement in EAB          = off
      Optimize                            = 5

Default Timing Specifications: None

Cut All Bidir Feedback Timing Paths       = on
Cut All Clear & Preset Timing Paths       = on

Ignore Timing Assignments                 = off

Functional SNF Extractor                  = off

Linked SNF Extractor                      = off
Timing SNF Extractor                      = on
Optimize Timing SNF                       = off
Generate AHDL TDO File                    = off
Fitter Settings                           = NORMAL
Use Quartus Fitter                        = on
Smart Recompile                           = off
Total Recompile                           = off

Interfaces Menu Commands
------------------------

EDIF Netlist Writer                       = off
Verilog Netlist Writer                    = off
VHDL Netlist Writer                       = off

Compilation Times
-----------------

   Compiler Netlist Extractor             00:00:00
   Database Builder                       00:00:00
   Logic Synthesizer                      00:00:00
   Partitioner                            00:00:00
   Fitter                                 00:00:03
   Timing SNF Extractor                   00:00:00
   Assembler                              00:00:01
   --------------------------             --------
   Total Time                             00:00:04


Memory Allocated
-----------------

Peak memory allocated during compilation  = 14,699K