openocd_at91sam7a3_flash_wiggler.cfg

atmel at91SAM7a3 ADC sample

#daemon configuration 
telnet_port 4444 
gdb_port 3333 

#interface 
interface parport 
parport_port 0x378 
parport_cable wiggler 
jtag_speed 0
jtag_nsrst_delay 200
jtag_ntrst_delay 200

#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config srst_only srst_pulls_trst

#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 4 0x1 0xf 0xe

#target configuration
daemon_startup reset

#target  
#target arm7tdmi    
target arm7tdmi little run_and_init 0 arm7tdmi
run_and_halt_time 0 30

# flash-options AT91
target_script 0 reset openocd_at91sam7a3_flash.script
working_area 0 0x00400000 0x4000 nobackup
flash bank at91sam7 0 0 0 0 0

# Information: 
# erase command (telnet-interface) for complete flash:
# flash erase  0 numlockbits-1 (can be seen from output of flash info 0)
# SAM7S64 with 16 lockbits and bank 0: flash erase 0 0 15
# set/clear NVM-Bits:
# at91sam7 gpnvm ... (type help in telnet interface for syntax)

# For more information about the configuration files, take a look at:
# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger