counter.fit

含有七人表决器

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 12/25/2002 13:34:34      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "counter"
BEGIN

    DEVICE = "EP1K30TC144-3";

    "add"                          : INPUT_PIN  = 48     ;
    "clk"                          : INPUT_PIN  = 125    ;
    "clr"                          : INPUT_PIN  = 49     ;
    "data0"                        : INPUT_PIN  = 43     ;
    "data1"                        : INPUT_PIN  = 41     ;
    "data2"                        : INPUT_PIN  = 39     ;
    "data3"                        : INPUT_PIN  = 38     ;
    "en"                           : INPUT_PIN  = 51     ;
    "mm0"                          : OUTPUT_PIN = 102    ;
    "mm1"                          : OUTPUT_PIN = 117    ;
    "mm2"                          : OUTPUT_PIN = 118    ;
    "mm3"                          : OUTPUT_PIN = 119    ;
    "mm4"                          : OUTPUT_PIN = 120    ;
    "mm5"                          : OUTPUT_PIN = 18     ;
    "mm6"                          : OUTPUT_PIN = 19     ;
    "mm7"                          : OUTPUT_PIN = 20     ;
    "|LPM_ADD_SUB:125|addcore:adder|pcarry1" : LOCATION   = LC2_D8 ;
    "|LPM_ADD_SUB:125|addcore:adder|pcarry2" : LOCATION   = LC2_D7 ;
    "|LPM_ADD_SUB:125|addcore:adder|:133" : LOCATION   = LC3_D14;
    "|LPM_ADD_SUB:125|addcore:adder|:152" : LOCATION   = LC8_D7 ;
    "|LPM_ADD_SUB:125|addcore:adder|:153" : LOCATION   = LC3_D11;
    "|LPM_ADD_SUB:125|addcore:adder|:154" : LOCATION   = LC2_D14;
    "|LPM_ADD_SUB:125|addcore:adder|:155" : LOCATION   = LC7_D5 ;
    "|LPM_ADD_SUB:125|addcore:adder|:156" : LOCATION   = LC6_D8 ;
    "|LPM_ADD_SUB:125|addcore:adder|:157" : LOCATION   = LC6_D7 ;
    "|LPM_ADD_SUB:125|addcore:adder|~158~1" : LOCATION   = LC8_D14;
    "|LPM_ADD_SUB:162|addcore:adder|pcarry2" : LOCATION   = LC3_D9 ;
    "|LPM_ADD_SUB:162|addcore:adder|:129" : LOCATION   = LC4_D14;
    "|LPM_ADD_SUB:162|addcore:adder|:137" : LOCATION   = LC4_D11;
    "|LPM_ADD_SUB:343|addcore:adder|pcarry1" : LOCATION   = LC4_D8 ;
    "|LPM_ADD_SUB:343|addcore:adder|pcarry2" : LOCATION   = LC7_D7 ;
    "|LPM_ADD_SUB:343|addcore:adder|pcarry4" : LOCATION   = LC5_D7 ;
    "|LPM_ADD_SUB:343|addcore:adder|:152" : LOCATION   = LC4_D7 ;
    "|LPM_ADD_SUB:343|addcore:adder|:154" : LOCATION   = LC6_D5 ;
    "|LPM_ADD_SUB:343|addcore:adder|:155" : LOCATION   = LC5_D5 ;
    "|LPM_ADD_SUB:343|addcore:adder|:156" : LOCATION   = LC8_D8 ;
    "|LPM_ADD_SUB:343|addcore:adder|:157" : LOCATION   = LC3_D7 ;
    "|LPM_ADD_SUB:343|addcore:adder|:158" : LOCATION   = LC1_D7 ;
    "|LPM_ADD_SUB:380|addcore:adder|pcarry4" : LOCATION   = LC5_D3 ;
    "|LPM_ADD_SUB:380|addcore:adder|pcarry5" : LOCATION   = LC1_D5 ;
    "|LPM_ADD_SUB:380|addcore:adder|:125" : LOCATION   = LC6_D3 ;
    ":25"                          : LOCATION   = LC2_D2 ;  -- change7
    ":26"                          : LOCATION   = LC1_D14;  -- change6
    ":27"                          : LOCATION   = LC7_D14;  -- change5
    ":28"                          : LOCATION   = LC8_D13;  -- change4
    ":29"                          : LOCATION   = LC5_D14;  -- change3
    ":30"                          : LOCATION   = LC2_D9 ;  -- change2
    ":31"                          : LOCATION   = LC7_D8 ;  -- change1
    ":32"                          : LOCATION   = LC1_D9 ;  -- change0
    ":153"                         : LOCATION   = LC6_D11;
    "~153~1"                       : LOCATION   = LC1_D11;
    "~153~2"                       : LOCATION   = LC2_D11;
    ":172"                         : LOCATION   = LC4_D5 ;
    ":178"                         : LOCATION   = LC6_D14;
    ":184"                         : LOCATION   = LC5_D11;
    ":190"                         : LOCATION   = LC8_D11;
    ":196"                         : LOCATION   = LC8_D9 ;
    ":202"                         : LOCATION   = LC6_D9 ;
    ":220"                         : LOCATION   = LC4_D1 ;
    ":348"                         : LOCATION   = LC8_D3 ;
    ":371"                         : LOCATION   = LC4_D3 ;
    "~371~1"                       : LOCATION   = LC8_D5 ;
    "~371~2"                       : LOCATION   = LC7_D3 ;
    ":390"                         : LOCATION   = LC2_D5 ;
    ":396"                         : LOCATION   = LC3_D5 ;
    ":402"                         : LOCATION   = LC3_D3 ;
    ":408"                         : LOCATION   = LC1_D3 ;
    ":414"                         : LOCATION   = LC2_D3 ;
    ":420"                         : LOCATION   = LC1_D8 ;
    ":503"                         : LOCATION   = LC6_D6 ;
    ":505"                         : LOCATION   = LC3_D6 ;
    ":509"                         : LOCATION   = LC4_D6 ;
    ":515"                         : LOCATION   = LC7_D6 ;
    "~516~1"                       : LOCATION   = LC2_D6 ;
    "~517~1"                       : LOCATION   = LC1_D6 ;
    ":521"                         : LOCATION   = LC1_D13;
    ":527"                         : LOCATION   = LC5_D9 ;
    ":533"                         : LOCATION   = LC7_D9 ;
    ":539"                         : LOCATION   = LC5_D8 ;
    ":541"                         : LOCATION   = LC3_D8 ;
    ":545"                         : LOCATION   = LC4_D9 ;
    "~546~1"                       : LOCATION   = LC8_D6 ;
    "~547~1"                       : LOCATION   = LC5_D6 ;

END;

INTERNAL_INFO "counter"
BEGIN
	DEVICE = EP1K30TC144-3;
    OV2C23P48 : LORAX = "1:V14C23,G87R3,PA10R3C5->LC6_D6,->LC3_D6,->LC2_D6,->LC1_D6,->LC8_D6,->LC5_D6|";
    OD4P125 : LORAX = "1:FB4->LC2_D2,->LC1_D14,->LC7_D14,->LC8_D13,->LC5_D14,->LC2_D9,->LC7_D8,->LC1_D9|";
    OV2C20P49 : LORAX = "1:V14C20,G121R3|2:PA19R3C1->LC2_D2|,2:PA19R3C7->LC7_D8|,2:PA19R3C8->LC2_D9,->LC1_D9|,2:PA19R3C12->LC8_D13|,2:PA19R3C13->LC1_D14,->LC7_D14,->LC5_D14||";