poc.fit

poc的VHDL详细设计 实现握手信号的交互

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 04/10/2007 00:47:04      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "poc"
BEGIN

    DEVICE = "EPM7064AEUC49-4";

    "a0"                           : INPUT_PIN  = B2     ; -- LC9
    "a1"                           : INPUT_PIN  = G4     ; -- LC17
    "a2"                           : INPUT_PIN  = A2     ; -- LC14
    "clk"                          : INPUT_PIN  = A5     ;
    "cs"                           : INPUT_PIN  = D2     ; -- LC1
    "d0"                           : INPUT_PIN  = G3     ; -- LC19
    "d1"                           : INPUT_PIN  = G1     ; -- LC22
    "d2"                           : INPUT_PIN  = F3     ; -- LC20
    "d3"                           : INPUT_PIN  = C3     ; -- LC16
    "d4"                           : INPUT_PIN  = E3     ; -- LC18
    "d5"                           : INPUT_PIN  = A1     ; -- LC11
    "d6"                           : INPUT_PIN  = G2     ; -- LC21
    "d7"                           : INPUT_PIN  = F2     ; -- LC24
    "rdy"                          : INPUT_PIN  = C1     ; -- LC5
    "reset"                        : INPUT_PIN  = D4     ; -- LC4
    "rw"                           : INPUT_PIN  = D1     ; -- LC3
    "nirq"                         : OUTPUT_PIN = A6     ; -- LC59
    "pd0"                          : OUTPUT_PIN = D3     ; -- LC25
    "pd1"                          : OUTPUT_PIN = D5     ; -- LC41
    "pd2"                          : OUTPUT_PIN = E7     ; -- LC46
    "pd3"                          : OUTPUT_PIN = E1     ; -- LC30
    "pd4"                          : OUTPUT_PIN = B6     ; -- LC53
    "pd5"                          : OUTPUT_PIN = C7     ; -- LC52
    "pd6"                          : OUTPUT_PIN = D6     ; -- LC51
    "pd7"                          : OUTPUT_PIN = C5     ; -- LC62
    "psr0"                         : OUTPUT_PIN = C4     ; -- LC64
    "psr1"                         : OUTPUT_PIN = G7     ; -- LC39
    "psr2"                         : OUTPUT_PIN = E5     ; -- LC33
    "psr3"                         : OUTPUT_PIN = G5     ; -- LC35
    "psr4"                         : OUTPUT_PIN = F5     ; -- LC36
    "psr5"                         : OUTPUT_PIN = G6     ; -- LC37
    "psr6"                         : OUTPUT_PIN = A7     ; -- LC57
    "psr7"                         : OUTPUT_PIN = D7     ; -- LC49
    "tr"                           : OUTPUT_PIN = F6     ; -- LC40
    "state~1"                      : LOCATION   = LC56   ; -- PIN B7
    "state~2"                      : LOCATION   = LC50   ;
    ":52"                          : LOCATION   = LC63   ;  -- br7
    ":53"                          : LOCATION   = LC58   ;  -- br6
    ":54"                          : LOCATION   = LC60   ;  -- br5
    ":55"                          : LOCATION   = LC61   ;  -- br4
    ":56"                          : LOCATION   = LC54   ;  -- br3
    ":57"                          : LOCATION   = LC34   ;  -- br2
    ":58"                          : LOCATION   = LC38   ;  -- br1
    ":59"                          : LOCATION   = LC55   ;  -- br0

END;

INTERNAL_INFO "poc"
BEGIN
	DEVICE = EPM7064AEUC49-4;
	LC62    : LORAX = "G112R0,PA35R0C3";
	LC51    : LORAX = "G31R0,PA4R0C3";
	LC52    : LORAX = "G32R0,PA1R0C3";
	LC53    : LORAX = "G62R0,PA16R0C3";
	LC30    : LORAX = "G71R0,PA25R0C1";
	LC46    : LORAX = "G75R0,PA23R0C2";
	LC41    : LORAX = "G107R0,PA35R0C2";
	LC25    : LORAX = "G103R0,PA32R0C1";
	LC40    : LORAX = "G28R0,PA0R0C2";
	LC49    : LORAX = "G29R0,PA7R0C3,PA8R0C2";
	LC57    : LORAX = "G78R0,PA20R0C3";
	LC37    : LORAX = "G25R0,PA2R0C2";
	LC36    : LORAX = "G61R0,PA9R0C2";
	LC35    : LORAX = "G60R0,PA12R0C2";
	LC33    : LORAX = "G58R0,PA13R0C2";
	LC39    : LORAX = "G27R0,PA7R0C2";
	LC64    : LORAX = "G114R0,PA31R0C3";
	LC59    : LORAX = "G80R0";
	OH2R0PD1 : LORAX = "G85R0,PA21R0C1,PA23R0C3,PA21R0C2";
	OH4R0PC1 : LORAX = "G116R0,PA27R0C1,PA28R0C3,PA27R0C2";
	LC63    : LORAX = "G113R0,PA34R0C3";
	OH23R0PF2 : LORAX = "G90R0,PA25R0C3";
	OH13R0PA2 : LORAX = "G34R0,PA13R0C3,PA15R0C2";
	OH16R0PG4 : LORAX = "G120R0,PA27R0C3,PA29R0C2";
	OH8R0PB2 : LORAX = "G0R0,PA0R0C3,PA6R0C2";
	LC56    : LORAX = "G65R0,PA10R0C1,PA10R0C3,PA11R0C2";
	OH3R0PD4 : LORAX = "G86R0,PA22R0C1,PA26R0C3,PA22R0C2";
	LC50    : LORAX = "G30R0,PA5R0C1,PA5R0C2,PA5R0C3";
	OH0R0PD2 : LORAX = "G83R0,PA19R0C3,PA18R0C1,PA18R0C2";
	LC58    : LORAX = "G79R0,PA21R0C3";
	OH20R0PG2 : LORAX = "G87R0,PA18R0C3";
	LC60    : LORAX = "G81R0,PA22R0C3";
	OH10R0PA1 : LORAX = "G2R0,PA3R0C3,PA3R0C2";
	LC61    : LORAX = "G111R0,PA29R0C3";
	OH17R0PE3 : LORAX = "G121R0,PA30R0C3,PA30R0C2";
	LC54    : LORAX = "G63R0,PA15R0C1,PA15R0C3";
	OH15R0PC3 : LORAX = "G36R0,PA14R0C2,PA14R0C3";
	LC34    : LORAX = "G59R0,PA10R0C2";
	OH19R0PF3 : LORAX = "G123R0,PA34R0C2";
	LC38    : LORAX = "G26R0,PA1R0C2";
	OH21R0PG1 : LORAX = "G88R0,PA24R0C2";
	LC55    : LORAX = "G64R0,PA12R0C1,PA12R0C3";
	OH18R0PG3 : LORAX = "G122R0,PA32R0C3";
END;