stm32stick.cfg

来自「openocd是比较好的调试工具软件,支持wiggle调试arm,也支持其他调试」· CFG 代码 · 共 27 行

# Hitex stm32 performance stick

# set jtag speed
jtag_khz 500

jtag_nsrst_delay 100
jtag_ntrst_delay 100

#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst

#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 4 0x1 0xf 0xe
jtag_device 5 0x1 0x1 0x1e
jtag_device 4 0x1 0xf 0xe

target create target0 cortex_m3 -endian little -chain-position 0

[new_target_name] configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0

#flash bank str7x <base> <size> 0 0 <target#> <variant>
flash bank stm32x 0 0 0 0 0

# For more information about the configuration files, take a look at:
# openocd.texi