netx500.cfg

openocd是比较好的调试工具软件,支持wiggle调试arm,也支持其他调试接口,例如USB口的FT2232.

#Hilscher netX 500 CPU
#use combined on interfaces or targets that can抰 set TRST/SRST separately
reset_config trst_and_srst
#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 4 0x1 0xf 0xe
jtag_nsrst_delay 100
jtag_ntrst_delay 100
target create target0 arm926ejs -endian little -chain-position 0 -variant arm926ejs