fen1250.fit

基于VHDL的串口通信 基于VHDL的串口通信

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 12/21/2008 14:36:19      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "fen1250"
BEGIN

    DEVICE = "EP1K10TC100-1";

    "clk"                          : INPUT_PIN  = 39     ;
    "qout"                         : OUTPUT_PIN = 63     ;
    "|LPM_ADD_SUB:64|addcore:adder|:87" : LOCATION   = LC6_B1 ;
    "|LPM_ADD_SUB:64|addcore:adder|:95" : LOCATION   = LC8_B1 ;
    "|LPM_ADD_SUB:64|addcore:adder|:103" : LOCATION   = LC5_B12;
    "|LPM_ADD_SUB:64|addcore:adder|:111" : LOCATION   = LC3_B12;
    "|LPM_ADD_SUB:64|addcore:adder|:115" : LOCATION   = LC3_B4 ;
    "|LPM_COMPARE:156|comptree:comparator|cmpchain:cmp_end|comptree:comp|comptree:sub_comptree|comptree:sub_comptree|comptree:sub_comptree|cmpchain:gt_cmp_end|~40~1" : LOCATION   = LC8_B4 ;
    "|LPM_COMPARE:156|comptree:comparator|cmpchain:cmp_end|comptree:comp|comptree:sub_comptree|comptree:sub_comptree|comptree:sub_comptree|cmpchain:gt_cmp_end|~40~2" : LOCATION   = LC6_B12;
    ":2"                           : LOCATION   = LC4_B4 ;
    ":4"                           : LOCATION   = LC1_B4 ;  -- cnt10
    ":5"                           : LOCATION   = LC2_B4 ;  -- cnt9
    ":6"                           : LOCATION   = LC2_B8 ;  -- cnt8
    ":7"                           : LOCATION   = LC5_B4 ;  -- cnt7
    ":8"                           : LOCATION   = LC8_B12;  -- cnt6
    ":9"                           : LOCATION   = LC2_B12;  -- cnt5
    ":10"                          : LOCATION   = LC4_B12;  -- cnt4
    ":11"                          : LOCATION   = LC7_B1 ;  -- cnt3
    ":12"                          : LOCATION   = LC4_B1 ;  -- cnt2
    ":13"                          : LOCATION   = LC5_B1 ;  -- cnt1
    ":14"                          : LOCATION   = LC3_B1 ;  -- cnt0
    ":29"                          : LOCATION   = LC7_B12;
    "~29~1"                        : LOCATION   = LC1_B12;
    "~29~2"                        : LOCATION   = LC1_B1 ;
    "~29~3"                        : LOCATION   = LC2_B1 ;
    ":87"                          : LOCATION   = LC7_B4 ;
    ":93"                          : LOCATION   = LC6_B4 ;

END;

INTERNAL_INFO "fen1250"
BEGIN
	DEVICE = EP1K10TC100-1;
    OD5P39  : LORAX = "1:FB5->LC4_B4,->LC1_B4,->LC2_B4,->LC2_B8,->LC5_B4,->LC8_B12,->LC2_B12,->LC4_B12,->LC7_B1,->LC4_B1,->LC5_B1,->LC3_B1|";
    LC8_B1  : LORAX = "1:MSW7R1C1,G58R1,PA2R1C11->LC5_B12,->LC6_B12,->LC2_B12,->LC4_B12|";
    LC5_B12 : LORAX = "1:MSW4R1C11,G66R1,PA7R1C3->LC3_B4,->LC8_B4,->LC5_B4|";
    LC3_B12 : LORAX = "1:MSW2R1C11,G18R1,PA16R1C7->LC2_B8|";
    LC6_B12 : LORAX = "1:MSW5R1C11,G72R1,PA1R1C3->LC4_B4|";
    LC4_B4  : LORAX = "1:MSW3R1C3,HHL17R1->OH11R1P63|";
    LC1_B4  : LORAX = "1:MSW0R1C3,G42R1,PA17R1C11->LC7_B12|";
    LC2_B4  : LORAX = "1:MSW1R1C3,G35R1,PA3R1C0->LC2_B1|";
    LC2_B8  : LORAX = "1:MSW1R1C7,G8R1|2:PA13R1C0->LC1_B1|,2:PA13R1C3->LC3_B4,->LC8_B4||";
    LC5_B4  : LORAX = "1:MSW4R1C3|2:G60R1,PA0R1C0->LC1_B1|,2:HHL38R1,PA11R1C11->LC3_B12||";
    LC8_B12 : LORAX = "1:MSW7R1C11,G68R1,PA5R1C3->LC3_B4,->LC8_B4,->LC5_B4|";
    LC4_B1  : LORAX = "1:MSW3R1C1,G9R1,PA12R1C11->LC7_B12|";
    LC2_B1  : LORAX = "1:MSW1R1C1,G29R1,PA10R1C11->LC7_B12|";
    LC7_B12 : LORAX = "1:|2:MSW6R1C11,G70R1,PA17R1C0->LC7_B1,->LC4_B1,->LC5_B1|,2:MSW7R1C10,G80R1|3:PA17R1C3->LC5_B4,->LC7_B4,->LC6_B4|,3:PA5R1C7->LC2_B8|||";
	LC6_B1  : LORAX2 = "X, X, LC5_B1, LC3_B1";
	LC8_B1  : LORAX2 = "LC4_B1, LC5_B1, LC7_B1, LC3_B1";
	LC5_B12 : LORAX2 = "X, LC2_B12, LC4_B12, LC8_B1";
	LC3_B12 : LORAX2 = "X, LC8_B12, LC5_B4, LC5_B12";
	LC3_B4  : LORAX2 = "LC8_B12, LC2_B8, LC5_B4, LC5_B12";
	LC8_B4  : LORAX2 = "LC8_B12, LC5_B4, LC2_B8, LC5_B12";
	LC6_B12 : LORAX2 = "LC4_B12, LC8_B12, LC2_B12, LC8_B1";
	LC4_B4  : LORAX2 = "LC6_B12, LC8_B4, LC7_B4, LC6_B4";
	LC1_B4  : LORAX2 = "X, X, X, LC7_B4";
	LC2_B4  : LORAX2 = "X, X, X, LC6_B4";
	LC2_B8  : LORAX2 = "X, LC3_B12, LC7_B12, LC2_B8";
	LC5_B4  : LORAX2 = "LC8_B12, LC7_B12, LC5_B4, LC5_B12";
	LC8_B12 : LORAX2 = "X, LC8_B12, LC7_B12, LC5_B12";
	LC2_B12 : LORAX2 = "LC2_B12, LC4_B12, LC7_B12, LC8_B1";
	LC4_B12 : LORAX2 = "X, LC4_B12, LC7_B12, LC8_B1";
	LC7_B1  : LORAX2 = "LC6_B1, LC4_B1, LC7_B12, LC7_B1";
	LC4_B1  : LORAX2 = "LC4_B1, LC5_B1, LC7_B12, LC3_B1";
	LC5_B1  : LORAX2 = "X, LC5_B1, LC7_B12, LC3_B1";
	LC3_B1  : LORAX2 = "X, X, X, LC3_B1";
	LC1_B12 : LORAX2 = "X, LC2_B12, LC4_B12, LC8_B12";
	LC1_B1  : LORAX2 = "X, LC7_B1, LC5_B4, LC2_B8";
	LC2_B1  : LORAX2 = "LC2_B4, LC5_B1, LC3_B1, LC1_B1";
	LC7_B12 : LORAX2 = "LC1_B4, LC1_B12, LC4_B1, LC2_B1";
	LC7_B4  : LORAX2 = "LC1_B4, LC2_B4, LC7_B12, LC3_B4";
	LC6_B4  : LORAX2 = "X, LC2_B4, LC7_B12, LC3_B4";
END;