counter60.fit

数字钟 可实现正常计数校准 还有方电台报时功能 四低一高 闹钟功能

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 12/12/2008 16:02:30      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "counter60"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "CP"                           : INPUT_PIN  = 1      ;
    "EN"                           : INPUT_PIN  = 42     ;
    "nCR"                          : INPUT_PIN  = 2      ;
    "Cnt0"                         : OUTPUT_PIN = 27     ;
    "Cnt1"                         : OUTPUT_PIN = 30     ;
    "Cnt2"                         : OUTPUT_PIN = 61     ;
    "Cnt3"                         : OUTPUT_PIN = 39     ;
    "Cnt4"                         : OUTPUT_PIN = 25     ;
    "Cnt5"                         : OUTPUT_PIN = 22     ;
    "Cnt6"                         : OUTPUT_PIN = 23     ;
    "Cnt7"                         : OUTPUT_PIN = 24     ;
    "|counter6:UC1|lpm_add_sub:45|addcore:adder|:55" : LOCATION   = LC3_B6 ;
    "|counter6:UC1|lpm_add_sub:45|addcore:adder|:59" : LOCATION   = LC5_B6 ;
    "|counter6:UC1|:14"            : LOCATION   = LC2_B6 ;
    "|counter6:UC1|:41"            : LOCATION   = LC6_B6 ;
    "|counter6:UC1|:42"            : LOCATION   = LC4_B6 ;
    "|counter6:UC1|:43"            : LOCATION   = LC1_B6 ;
    "|counter6:UC1|:44"            : LOCATION   = LC8_C11;
    "|counter10:UC0|lpm_add_sub:45|addcore:adder|:59" : LOCATION   = LC6_C11;
    "|counter10:UC0|lpm_add_sub:45|addcore:adder|:68" : LOCATION   = LC4_C11;
    "|counter10:UC0|:41"           : LOCATION   = LC2_C11;
    "|counter10:UC0|:42"           : LOCATION   = LC3_C11;
    "|counter10:UC0|:43"           : LOCATION   = LC7_C11;
    "|counter10:UC0|:44"           : LOCATION   = LC1_C11;
    ":12"                          : LOCATION   = LC5_C11;

END;

INTERNAL_INFO "counter60"
BEGIN
	DEVICE = EPF10K10LC84-3;
    LC6_B6  : LORAX = "1:MSW5R1C5,HHL39R1->OH13R1P24|";
    LC4_B6  : LORAX = "1:MSW3R1C5,HHL10R1->OH11R1P23|";
    LC1_B6  : LORAX = "1:MSW1R1C4,HHL5R1->OH9R1P22|";
    LC8_C11 : LORAX = "1:MSW7R2C10,V22C10,HHL25R1->OH15R1P25|2:PA3R1C5->LC3_B6,->LC5_B6,->LC2_B6,->LC1_B6||";
    LC2_C11 : LORAX = "1:MSW1R2C10,V4C10->OV3C10P39|";
    LC3_C11 : LORAX = "1:MSW2R2C10,G10R2->OH2R2P61|";
    LC7_C11 : LORAX = "1:MSW6R2C11,HHL24R2->OH14R2P30|";
    LC1_C11 : LORAX = "1:MSW0R2C10,HHL18R2->OH8R2P27|";
    OD4P1   : LORAX = "1:FB4->LC6_B6,->LC4_B6,->LC1_B6,->LC8_C11,->LC2_C11,->LC3_C11,->LC7_C11,->LC1_C11|";
    OD3P42  : LORAX = "1:FB3|2:FH3R2,PA5R2C10->LC2_C11,->LC3_C11,->LC7_C11,->LC1_C11||";
    OD1P2   : LORAX = "1:FB1->LC6_B6,->LC4_B6,->LC1_B6,->LC8_C11,->LC2_C11,->LC3_C11,->LC7_C11,->LC1_C11|";
    LC5_C11 : LORAX = "1:MSW4R2C11,V13C11,HHL30R1,PA5R1C5->LC6_B6,->LC4_B6,->LC1_B6|";
	LC3_B6  : LORAX2 = "X, X, LC8_C11, LC1_B6";
	LC5_B6  : LORAX2 = "X, LC4_B6, LC8_C11, LC1_B6";
	LC2_B6  : LORAX2 = "LC6_B6, LC8_C11, LC4_B6, LC1_B6";
	LC6_B6  : LORAX2 = "LC6_B6, LC5_C11, LC2_B6, LC5_B6";
	LC4_B6  : LORAX2 = "LC5_C11, LC2_B6, LC4_B6, LC3_B6";
	LC1_B6  : LORAX2 = "LC8_C11, LC1_B6, LC2_B6, LC5_C11";
	LC8_C11 : LORAX2 = "X, X, LC5_C11, LC8_C11";
	LC6_C11 : LORAX2 = "X, LC3_C11, LC1_C11, LC7_C11";
	LC4_C11 : LORAX2 = "X, LC3_C11, LC1_C11, LC7_C11";
	LC2_C11 : LORAX2 = "OD3P42, LC2_C11, LC6_C11, LC5_C11";
	LC3_C11 : LORAX2 = "OD3P42, LC3_C11, LC4_C11, LC5_C11";
	LC7_C11 : LORAX2 = "OD3P42, LC7_C11, LC5_C11, LC1_C11";
	LC1_C11 : LORAX2 = "X, X, OD3P42, LC1_C11";
	LC5_C11 : LORAX2 = "LC2_C11, LC1_C11, LC3_C11, LC7_C11";
END;