cnt24.fit

这是二十四进制计数器的源程序

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 11/08/2008 21:29:03      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "cnt24"
BEGIN

    DEVICE = "EP1K10TC100-1";

    "CLK"                          : INPUT_PIN  = 39     ;
    "CLR"                          : INPUT_PIN  = 38     ;
    "QOUT0"                        : OUTPUT_PIN = 70     ;
    "QOUT1"                        : OUTPUT_PIN = 71     ;
    "QOUT2"                        : OUTPUT_PIN = 8      ;
    "QOUT3"                        : OUTPUT_PIN = 9      ;
    "QOUT4"                        : OUTPUT_PIN = 10     ;
    "QOUT5"                        : OUTPUT_PIN = 5      ;
    "QOUT6"                        : OUTPUT_PIN = 7      ;
    "QOUT7"                        : OUTPUT_PIN = 6      ;
    "|LPM_ADD_SUB:147|addcore:adder|:55" : LOCATION   = LC4_A24;
    "|LPM_ADD_SUB:206|addcore:adder|:55" : LOCATION   = LC6_A21;
    ":12"                          : LOCATION   = LC2_A24;  -- QH7
    ":13"                          : LOCATION   = LC3_A24;  -- QH6
    ":14"                          : LOCATION   = LC1_A23;  -- QH5
    ":15"                          : LOCATION   = LC8_A24;  -- QH4
    ":16"                          : LOCATION   = LC7_A21;  -- QL3
    ":17"                          : LOCATION   = LC5_A21;  -- QL2
    ":18"                          : LOCATION   = LC1_A21;  -- QL1
    ":19"                          : LOCATION   = LC3_A21;  -- QL0
    ":84"                          : LOCATION   = LC2_A21;
    "~107~1"                       : LOCATION   = LC4_A21;
    ":108"                         : LOCATION   = LC2_A23;
    ":122"                         : LOCATION   = LC6_A24;
    ":249"                         : LOCATION   = LC7_A24;
    "~249~1"                       : LOCATION   = LC3_A23;
    ":255"                         : LOCATION   = LC1_A24;
    ":261"                         : LOCATION   = LC5_A24;
    "~312~1"                       : LOCATION   = LC6_A23;

END;

INTERNAL_INFO "cnt24"
BEGIN
	DEVICE = EP1K10TC100-1;
    OD5P39  : LORAX = "1:FB5->LC2_A24,->LC3_A24,->LC1_A23,->LC8_A24,->LC7_A21,->LC5_A21,->LC1_A21,->LC3_A21|";
    OD2P38  : LORAX = "1:FB2|2:FH2R0|3:PA6R0C20->LC3_A21|,3:PA6R0C22->LC1_A23,->LC6_A23|,3:PA6R0C23->LC2_A24,->LC3_A24,->LC8_A24|||";
    LC2_A24 : LORAX = "1:MSW1R0C23,HHR16R0->OH1R0P6|";
    LC3_A24 : LORAX = "1:MSW2R0C23,G18R0->OH2R0P7|";
    LC1_A23 : LORAX = "1:MSW0R0C23|2:G36R0,PA2R0C23->LC4_A24,->LC6_A24,->LC1_A24,->LC5_A24|,2:HHR20R0->OH0R0P5||";
    LC8_A24 : LORAX = "1:MSW7R0C23,HHR47R0->OH7R0P10|";
    LC7_A21 : LORAX = "1:MSW6R0C20,HHR40R0->OH6R0P9|";
    LC5_A21 : LORAX = "1:MSW4R0C21,HHR38R0->OH4R0P8|";
    LC1_A21 : LORAX = "1:MSW0R0C21,G37R0->OH8R0P71|";
    LC3_A21 : LORAX = "1:MSW2R0C20,G7R0->OH10R0P70|";
    LC2_A21 : LORAX = "1:MSW1R0C21,G34R0|2:PA4R0C22->LC2_A23|,2:PA4R0C23->LC2_A24,->LC3_A24,->LC8_A24||";
    LC4_A21 : LORAX = "1:MSW3R0C20,G30R0,PA11R0C22->LC2_A23|";
    LC6_A24 : LORAX = "1:MSW6R0C22,G82R0,PA3R0C22->LC2_A23,->LC3_A23|";
    LC3_A23 : LORAX = "1:MSW2R0C22,G10R0,PA10R0C23->LC8_A24,->LC7_A24,->LC1_A24,->LC5_A24|";
    LC5_A24 : LORAX = "1:MSW5R0C22,G73R0,PA20R0C22->LC1_A23|";
    LC6_A23 : LORAX = "1:MSW5R0C23,G72R0,PA19R0C20->LC7_A21,->LC5_A21,->LC1_A21|";
	LC4_A24 : LORAX2 = "X, X, LC8_A24, LC1_A23";
	LC6_A21 : LORAX2 = "X, X, LC3_A21, LC1_A21";
	LC2_A24 : LORAX2 = "OD2P38, LC2_A21, LC7_A24, LC2_A24";
	LC3_A24 : LORAX2 = "OD2P38, LC2_A21, LC1_A24, LC3_A24";
	LC1_A23 : LORAX2 = "OD2P38, LC5_A24, LC2_A23, LC1_A23";
	LC8_A24 : LORAX2 = "OD2P38, LC2_A21, LC3_A23, LC8_A24";
	LC7_A21 : LORAX2 = "LC6_A23, LC6_A21, LC7_A21, LC5_A21";
	LC5_A21 : LORAX2 = "X, LC6_A23, LC6_A21, LC5_A21";
	LC1_A21 : LORAX2 = "X, LC6_A23, LC3_A21, LC1_A21";
	LC3_A21 : LORAX2 = "X, X, OD2P38, LC3_A21";
	LC2_A21 : LORAX2 = "LC3_A21, LC1_A21, LC7_A21, LC5_A21";
	LC4_A21 : LORAX2 = "X, LC6_A21, LC5_A21, LC7_A21";
	LC2_A23 : LORAX2 = "X, LC6_A24, LC2_A21, LC4_A21";
	LC6_A24 : LORAX2 = "LC8_A24, LC1_A23, LC2_A24, LC3_A24";
	LC3_A23 : LORAX2 = "X, X, LC6_A24, LC2_A23";
	LC7_A24 : LORAX2 = "LC4_A24, LC3_A23, LC2_A24, LC3_A24";
	LC1_A24 : LORAX2 = "LC3_A23, LC3_A24, LC1_A23, LC8_A24";
	LC5_A24 : LORAX2 = "X, LC3_A23, LC8_A24, LC1_A23";
	LC6_A23 : LORAX2 = "X, X, OD2P38, LC2_A23";
END;