seg70.fit.qmsg

CPLD开发板VHDL源程序并附上开发板的原理图

{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0 "" 0}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 7.1 Build 156 04/30/2007 SJ Full Version " "Info: Version 7.1 Build 156 04/30/2007 SJ Full Version" {  } {  } 0 0 "%1!s!" 0 0 "" 0} { "Info" "IQEXE_START_BANNER_TIME" "Sat Oct 11 21:19:27 2008 " "Info: Processing started: Sat Oct 11 21:19:27 2008" {  } {  } 0 0 "Processing started: %1!s!" 0 0 "" 0}  } {  } 4 0 "Running %2!s! %1!s!" 0 0 "" 0}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off seg70 -c seg70 " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off seg70 -c seg70" {  } {  } 0 0 "Command: %1!s!" 0 0 "" 0}
{ "Info" "IMPP_MPP_USER_DEVICE" "seg70 EPM240T100C5 " "Info: Selected device EPM240T100C5 for design \"seg70\"" {  } {  } 0 0 "Selected device %2!s! for design \"%1!s!\"" 0 0 "" 0}
{ "Info" "IFITCC_FITCC_INFO_STANDARD_FIT_COMPILATION_ON" "" "Info: Fitter is performing a Standard Fit compilation using maximum Fitter effort to optimize design performance" {  } {  } 0 0 "Fitter is performing a Standard Fit compilation using maximum Fitter effort to optimize design performance" 0 0 "" 0}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM240T100I5 " "Info: Device EPM240T100I5 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM570T100C5 " "Info: Device EPM570T100C5 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM570T100I5 " "Info: Device EPM570T100I5 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0}  } {  } 2 0 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "" 0}
{ "Warning" "WFIOMGR_PINS_MISSING_LOCATION_INFO" "18 18 " "Warning: No exact pin location assignment(s) for 18 pins of 18 total pins" { { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "dataout\[0\] " "Info: Pin dataout\[0\] not assigned to an exact location on the device" {  } { { "seg70.vhd" "" { Text "F:/学习文件/EDA资料/CPLD开发板VHDL源程序并附上开发板的原理图/VHDL_Development_Board_Sources/接口实验/7段数码管/seg70/seg70.vhd" 10 -1 0 } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { dataout[0] } "NODE_NAME" } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { dataout[0] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "dataout\[1\] " "Info: Pin dataout\[1\] not assigned to an exact location on the device" {  } { { "seg70.vhd" "" { Text "F:/学习文件/EDA资料/CPLD开发板VHDL源程序并附上开发板的原理图/VHDL_Development_Board_Sources/接口实验/7段数码管/seg70/seg70.vhd" 10 -1 0 } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { dataout[1] } "NODE_NAME" } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { dataout[1] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "dataout\[2\] " "Info: Pin dataout\[2\] not assigned to an exact location on the device" {  } { { "seg70.vhd" "" { Text "F:/学习文件/EDA资料/CPLD开发板VHDL源程序并附上开发板的原理图/VHDL_Development_Board_Sources/接口实验/7段数码管/seg70/seg70.vhd" 10 -1 0 } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { dataout[2] } "NODE_NAME" } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { dataout[2] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "dataout\[3\] " "Info: Pin dataout\[3\] not assigned to an exact location on the device" {  } { { "seg70.vhd" "" { Text "F:/学习文件/EDA资料/CPLD开发板VHDL源程序并附上开发板的原理图/VHDL_Development_Board_Sources/接口实验/7段数码管/seg70/seg70.vhd" 10 -1 0 } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { dataout[3] } "NODE_NAME" } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { dataout[3] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "dataout\[4\] " "Info: Pin dataout\[4\] not assigned to an exact location on the device" {  } { { "seg70.vhd" "" { Text "F:/学习文件/EDA资料/CPLD开发板VHDL源程序并附上开发板的原理图/VHDL_Development_Board_Sources/接口实验/7段数码管/seg70/seg70.vhd" 10 -1 0 } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { dataout[4] } "NODE_NAME" } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { dataout[4] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "dataout\[5\] " "Info: Pin dataout\[5\] not assigned to an exact location on the device" {  } { { "seg70.vhd" "" { Text "F:/学习文件/EDA资料/CPLD开发板VHDL源程序并附上开发板的原理图/VHDL_Development_Board_Sources/接口实验/7段数码管/seg70/seg70.vhd" 10 -1 0 } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { dataout[5] } "NODE_NAME" } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { dataout[5] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "dataout\[6\] " "Info: Pin dataout\[6\] not assigned to an exact location on the device" {  } { { "seg70.vhd" "" { Text "F:/学习文件/EDA资料/CPLD开发板VHDL源程序并附上开发板的原理图/VHDL_Development_Board_Sources/接口实验/7段数码管/seg70/seg70.vhd" 10 -1 0 } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { dataout[6] } "NODE_NAME" } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { dataout[6] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "dataout\[7\] " "Info: Pin dataout\[7\] not assigned to an exact location on the device" {  } { { "seg70.vhd" "" { Text "F:/学习文件/EDA资料/CPLD开发板VHDL源程序并附上开发板的原理图/VHDL_Development_Board_Sources/接口实验/7段数码管/seg70/seg70.vhd" 10 -1 0 } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { dataout[7] } "NODE_NAME" } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { dataout[7] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "en\[0\] " "Info: Pin en\[0\] not assigned to an exact location on the device" {  } { { "seg70.vhd" "" { Text "F:/学习文件/EDA资料/CPLD开发板VHDL源程序并附上开发板的原理图/VHDL_Development_Board_Sources/接口实验/7段数码管/seg70/seg70.vhd" 11 -1 0 } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { en[0] } "NODE_NAME" } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { en[0] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "en\[1\] " "Info: Pin en\[1\] not assigned to an exact location on the device" {  } { { "seg70.vhd" "" { Text "F:/学习文件/EDA资料/CPLD开发板VHDL源程序并附上开发板的原理图/VHDL_Development_Board_Sources/接口实验/7段数码管/seg70/seg70.vhd" 11 -1 0 } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { en[1] } "NODE_NAME" } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { en[1] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "en\[2\] " "Info: Pin en\[2\] not assigned to an exact location on the device" {  } { { "seg70.vhd" "" { Text "F:/学习文件/EDA资料/CPLD开发板VHDL源程序并附上开发板的原理图/VHDL_Development_Board_Sources/接口实验/7段数码管/seg70/seg70.vhd" 11 -1 0 } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { en[2] } "NODE_NAME" } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { en[2] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "en\[3\] " "Info: Pin en\[3\] not assigned to an exact location on the device" {  } { { "seg70.vhd" "" { Text "F:/学习文件/EDA资料/CPLD开发板VHDL源程序并附上开发板的原理图/VHDL_Development_Board_Sources/接口实验/7段数码管/seg70/seg70.vhd" 11 -1 0 } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { en[3] } "NODE_NAME" } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { en[3] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "en\[4\] " "Info: Pin en\[4\] not assigned to an exact location on the device" {  } { { "seg70.vhd" "" { Text "F:/学习文件/EDA资料/CPLD开发板VHDL源程序并附上开发板的原理图/VHDL_Development_Board_Sources/接口实验/7段数码管/seg70/seg70.vhd" 11 -1 0 } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { en[4] } "NODE_NAME" } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { en[4] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "en\[5\] " "Info: Pin en\[5\] not assigned to an exact location on the device" {  } { { "seg70.vhd" "" { Text "F:/学习文件/EDA资料/CPLD开发板VHDL源程序并附上开发板的原理图/VHDL_Development_Board_Sources/接口实验/7段数码管/seg70/seg70.vhd" 11 -1 0 } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { en[5] } "NODE_NAME" } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { en[5] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "en\[6\] " "Info: Pin en\[6\] not assigned to an exact location on the device" {  } { { "seg70.vhd" "" { Text "F:/学习文件/EDA资料/CPLD开发板VHDL源程序并附上开发板的原理图/VHDL_Development_Board_Sources/接口实验/7段数码管/seg70/seg70.vhd" 11 -1 0 } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { en[6] } "NODE_NAME" } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { en[6] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "en\[7\] " "Info: Pin en\[7\] not assigned to an exact location on the device" {  } { { "seg70.vhd" "" { Text "F:/学习文件/EDA资料/CPLD开发板VHDL源程序并附上开发板的原理图/VHDL_Development_Board_Sources/接口实验/7段数码管/seg70/seg70.vhd" 11 -1 0 } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { en[7] } "NODE_NAME" } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { en[7] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "clk " "Info: Pin clk not assigned to an exact location on the device" {  } { { "seg70.vhd" "" { Text "F:/学习文件/EDA资料/CPLD开发板VHDL源程序并附上开发板的原理图/VHDL_Development_Board_Sources/接口实验/7段数码管/seg70/seg70.vhd" 8 -1 0 } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { clk } "NODE_NAME" } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { clk } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "rst " "Info: Pin rst not assigned to an exact location on the device" {  } { { "seg70.vhd" "" { Text "F:/学习文件/EDA资料/CPLD开发板VHDL源程序并附上开发板的原理图/VHDL_Development_Board_Sources/接口实验/7段数码管/seg70/seg70.vhd" 9 -1 0 } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { rst } "NODE_NAME" } } { "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/program files/quartus ii 7.2/quartus/bin/TimingClosureFloorplan.fld" "" "" { rst } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0}  } {  } 0 0 "No exact pin location assignment(s) for %1!d! pins of %2!d! total pins" 0 0 "" 0}
{ "Info" "ITDC_FITTER_TIMING_ENGINE" "Classic " "Info: Fitter is using the Classic Timing Analyzer" {  } {  } 0 0 "Fitter is using the %1!s! Timing Analyzer" 0 0 "" 0}
{ "Info" "ITAN_TDC_DEFAULT_OPTIMIZATION_GOALS" "" "Info: Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" { { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "fmax 1000 MHz " "Info: Assuming a global fmax requirement of 1000 MHz" {  } {  } 0 0 "Assuming a global %1!s! requirement of %2!s!" 0 0 "" 0} { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "tsu 2.0 ns " "Info: Assuming a global tsu requirement of 2.0 ns" {  } {  } 0 0 "Assuming a global %1!s! requirement of %2!s!" 0 0 "" 0} { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "tco 1.0 ns " "Info: Assuming a global tco requirement of 1.0 ns" {  } {  } 0 0 "Assuming a global %1!s! requirement of %2!s!" 0 0 "" 0} { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "tpd 1.0 ns " "Info: Assuming a global tpd requirement of 1.0 ns" {  } {  } 0 0 "Assuming a global %1!s! requirement of %2!s!" 0 0 "" 0}  } {  } 0 0 "Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" 0 0 "" 0}
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Extra Info: Performing register packing on registers with non-logic cell location assignments" {  } {  } 1 0 "Performing register packing on registers with non-logic cell location assignments" 1 0 "" 0}
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Extra Info: Completed register packing on registers with non-logic cell location assignments" {  } {  } 1 0 "Completed register packing on registers with non-logic cell location assignments" 1 0 "" 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "User Assigned Global Signals Promotion Operation " "Info: Completed User Assigned Global Signals Promotion Operation" {  } {  } 0 0 "Completed %1!s!" 0 0 "" 0}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_ALL_TO_GLOBAL" "clk Global clock in PIN 14 " "Info: Automatically promoted signal \"clk\" to use Global clock in PIN 14" {  } { { "seg70.vhd" "" { Text "F:/学习文件/EDA资料/CPLD开发板VHDL源程序并附上开发板的原理图/VHDL_Development_Board_Sources/接口实验/7段数码管/seg70/seg70.vhd" 8 -1 0 } }  } 0 0 "Automatically promoted signal \"%1!s!\" to use %2!s!" 0 0 "" 0}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_ALL_TO_GLOBAL" "rst Global clock in PIN 12 " "Info: Automatically promoted signal \"rst\" to use Global clock in PIN 12" {  } { { "seg70.vhd" "" { Text "F:/学习文件/EDA资料/CPLD开发板VHDL源程序并附上开发板的原理图/VHDL_Development_Board_Sources/接口实验/7段数码管/seg70/seg70.vhd" 9 -1 0 } }  } 0 0 "Automatically promoted signal \"%1!s!\" to use %2!s!" 0 0 "" 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Global Promotion Operation " "Info: Completed Auto Global Promotion Operation" {  } {  } 0 0 "Completed %1!s!" 0 0 "" 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_FYGR_REGPACKING_INFO" "" "Info: Starting register packing" {  } {  } 0 0 "Starting register packing" 0 0 "" 0}
{ "Info" "IFYGR_FYGR_INFO_AUTO_MODE_REGISTER_PACKING" "Auto Normal " "Info: Fitter is using Normal packing mode for logic elements with Auto setting for Auto Packed Registers logic option" {  } {  } 0 0 "Fitter is using %2!s! packing mode for logic elements with %1!s! setting for Auto Packed Registers logic option" 0 0 "" 0}
{ "Extra Info" "IFSAC_FSAC_START_LUT_PACKING" "" "Extra Info: Moving registers into LUTs to improve timing and density" {  } {  } 1 0 "Moving registers into LUTs to improve timing and density" 1 0 "" 0}
{ "Info" "IFYGR_FYGR_NO_REGS_IN_IOS_HEADER" "" "Info: Started processing fast register assignments" {  } {  } 0 0 "Started processing fast register assignments" 0 0 "" 0}