bcd.fit.qmsg

一些Verilog学习程序B

{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 6.0 Build 178 04/27/2006 SJ Full Version " "Info: Version 6.0 Build 178 04/27/2006 SJ Full Version" {  } {  } 0 0 "%1!s!" 0 0} { "Info" "IQEXE_START_BANNER_TIME" "Sun Jan 11 21:24:19 2009 " "Info: Processing started: Sun Jan 11 21:24:19 2009" {  } {  } 0 0 "Processing started: %1!s!" 0 0}  } {  } 4 0 "Running %2!s! %1!s!" 0 0}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off bcd -c bcd " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off bcd -c bcd" {  } {  } 0 0 "Command: %1!s!" 0 0}
{ "Info" "IMPP_MPP_USER_DEVICE" "bcd EPM240T100C5 " "Info: Selected device EPM240T100C5 for design \"bcd\"" {  } {  } 0 0 "Selected device %2!s! for design \"%1!s!\"" 0 0}
{ "Info" "IFITCC_FITCC_INFO_STANDARD_FIT_COMPILATION_ON" "" "Info: Fitter is performing a Standard Fit compilation using maximum Fitter effort to optimize design performance" {  } {  } 0 0 "Fitter is performing a Standard Fit compilation using maximum Fitter effort to optimize design performance" 0 0}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM240T100I5 " "Info: Device EPM240T100I5 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM570T100C5 " "Info: Device EPM570T100C5 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM570T100I5 " "Info: Device EPM570T100I5 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0}  } {  } 2 0 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0}
{ "Info" "ITAN_TDC_DEFAULT_OPTIMIZATION_GOALS" "" "Info: Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" { { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "fmax 1000 MHz " "Info: Assuming a global fmax requirement of 1000 MHz" {  } {  } 0 0 "Assuming a global %1!s! requirement of %2!s!" 0 0} { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "tsu 2.0 ns " "Info: Assuming a global tsu requirement of 2.0 ns" {  } {  } 0 0 "Assuming a global %1!s! requirement of %2!s!" 0 0} { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "tco 1.0 ns " "Info: Assuming a global tco requirement of 1.0 ns" {  } {  } 0 0 "Assuming a global %1!s! requirement of %2!s!" 0 0} { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "tpd 1.0 ns " "Info: Assuming a global tpd requirement of 1.0 ns" {  } {  } 0 0 "Assuming a global %1!s! requirement of %2!s!" 0 0}  } {  } 0 0 "Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" 0 0}
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Extra Info: Performing register packing on registers with non-logic cell location assignments" {  } {  } 1 0 "Performing register packing on registers with non-logic cell location assignments" 1 0}
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Extra Info: Completed register packing on registers with non-logic cell location assignments" {  } {  } 1 0 "Completed register packing on registers with non-logic cell location assignments" 1 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "User Assigned Global Signals Promotion Operation " "Info: Completed User Assigned Global Signals Promotion Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_ALL_TO_GLOBAL" "clk Global clock in PIN 12 " "Info: Automatically promoted signal \"clk\" to use Global clock in PIN 12" {  } { { "bcd.v" "" { Text "E:/Verilog/基础实验/二进制转BCD码/bcd.v" 6 -1 0 } }  } 0 0 "Automatically promoted signal \"%1!s!\" to use %2!s!" 0 0}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_ALL_TO_GLOBAL" "rst Global clock " "Info: Automatically promoted signal \"rst\" to use Global clock" {  } { { "bcd.v" "" { Text "E:/Verilog/基础实验/二进制转BCD码/bcd.v" 6 -1 0 } }  } 0 0 "Automatically promoted signal \"%1!s!\" to use %2!s!" 0 0}
{ "Info" "IFYGR_FYGR_PIN_USES_INTERNAL_GLOBAL" "rst " "Info: Pin \"rst\" drives global clock, but is not placed in a dedicated clock pin position" {  } { { "bcd.v" "" { Text "E:/Verilog/基础实验/二进制转BCD码/bcd.v" 6 -1 0 } } { "c:/altera/quartus60/win/Assignment Editor.qase" "" { Assignment "c:/altera/quartus60/win/Assignment Editor.qase" 1 { { 0 "rst" } } } } { "c:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "" { rst } "NODE_NAME" } } { "c:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "" { rst } "NODE_NAME" } }  } 0 0 "Pin \"%1!s!\" drives global clock, but is not placed in a dedicated clock pin position" 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Global Promotion Operation " "Info: Completed Auto Global Promotion Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_FYGR_REGPACKING_INFO" "" "Info: Starting register packing" {  } {  } 0 0 "Starting register packing" 0 0}
{ "Info" "IFYGR_FYGR_INFO_AUTO_MODE_REGISTER_PACKING" "Auto Normal " "Info: Fitter is using Normal packing mode for logic elements with Auto setting for Auto Packed Registers logic option" {  } {  } 0 0 "Fitter is using %2!s! packing mode for logic elements with %1!s! setting for Auto Packed Registers logic option" 0 0}
{ "Extra Info" "IFSAC_FSAC_START_LUT_PACKING" "" "Extra Info: Moving registers into LUTs to improve timing and density" {  } {  } 1 0 "Moving registers into LUTs to improve timing and density" 1 0}
{ "Info" "IFYGR_FYGR_NO_REGS_IN_IOS_HEADER" "" "Info: Started processing fast register assignments" {  } {  } 0 0 "Started processing fast register assignments" 0 0}
{ "Info" "IFYGR_FYGR_NO_REGS_IN_IOS_FOOTER" "" "Info: Finished processing fast register assignments" {  } {  } 0 0 "Finished processing fast register assignments" 0 0}
{ "Extra Info" "IFSAC_FSAC_FINISH_LUT_PACKING" "00:00:00 " "Extra Info: Finished moving registers into LUTs: elapsed time is 00:00:00" {  } {  } 1 0 "Finished moving registers into LUTs: elapsed time is %1!s!" 1 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "00:00:00 " "Info: Finished register packing: elapsed time is 00:00:00" {  } {  } 0 0 "Finished register packing: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:01 " "Info: Fitter placement operations ending: elapsed time is 00:00:01" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "8.351 ns register pin " "Info: Estimated most critical path is register to pin delay of 8.351 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns en\[1\]~reg0 1 REG LAB_X5_Y4 4 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X5_Y4; Fanout = 4; REG Node = 'en\[1\]~reg0'" {  } { { "c:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "" { en[1]~reg0 } "NODE_NAME" } } { "bcd.v" "" { Text "E:/Verilog/基础实验/二进制转BCD码/bcd.v" 31 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(1.156 ns) + CELL(0.200 ns) 1.356 ns Selector0~24 2 COMB LAB_X5_Y4 4 " "Info: 2: + IC(1.156 ns) + CELL(0.200 ns) = 1.356 ns; Loc. = LAB_X5_Y4; Fanout = 4; COMB Node = 'Selector0~24'" {  } { { "c:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "1.356 ns" { en[1]~reg0 Selector0~24 } "NODE_NAME" } } { "bcd.v" "" { Text "E:/Verilog/基础实验/二进制转BCD码/bcd.v" 41 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(0.266 ns) + CELL(0.914 ns) 2.536 ns Selector0~25 3 COMB LAB_X5_Y4 7 " "Info: 3: + IC(0.266 ns) + CELL(0.914 ns) = 2.536 ns; Loc. = LAB_X5_Y4; Fanout = 7; COMB Node = 'Selector0~25'" {  } { { "c:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "1.180 ns" { Selector0~24 Selector0~25 } "NODE_NAME" } } { "bcd.v" "" { Text "E:/Verilog/基础实验/二进制转BCD码/bcd.v" 41 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(0.980 ns) + CELL(0.200 ns) 3.716 ns WideOr5~15 4 COMB LAB_X5_Y4 1 " "Info: 4: + IC(0.980 ns) + CELL(0.200 ns) = 3.716 ns; Loc. = LAB_X5_Y4; Fanout = 1; COMB Node = 'WideOr5~15'" {  } { { "c:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "1.180 ns" { Selector0~25 WideOr5~15 } "NODE_NAME" } } { "bcd.v" "" { Text "E:/Verilog/基础实验/二进制转BCD码/bcd.v" 69 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(2.313 ns) + CELL(2.322 ns) 8.351 ns c\[5\] 5 PIN PIN_78 0 " "Info: 5: + IC(2.313 ns) + CELL(2.322 ns) = 8.351 ns; Loc. = PIN_78; Fanout = 0; PIN Node = 'c\[5\]'" {  } { { "c:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "4.635 ns" { WideOr5~15 c[5] } "NODE_NAME" } } { "bcd.v" "" { Text "E:/Verilog/基础实验/二进制转BCD码/bcd.v" 8 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "3.636 ns ( 43.54 % ) " "Info: Total cell delay = 3.636 ns ( 43.54 % )" {  } {  } 0 0 "Total cell delay = %1!s! %2!s!" 0 0} { "Info" "ITDB_TOTAL_IC_DELAY" "4.715 ns ( 56.46 % ) " "Info: Total interconnect delay = 4.715 ns ( 56.46 % )" {  } {  } 0 0 "Total interconnect delay = %1!s! %2!s!" 0 0}  } { { "c:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "8.351 ns" { en[1]~reg0 Selector0~24 Selector0~25 WideOr5~15 c[5] } "NODE_NAME" } }  } 0 0 "Estimated most critical path is %2!s! to %3!s! delay of %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "3 3 " "Info: Average interconnect usage is 3% of the available device resources. Peak interconnect usage is 3%" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "x0_y0 x8_y5 " "Info: The peak interconnect region extends from location x0_y0 to location x8_y5" {  } {  } 0 0 "The peak interconnect region extends from location %1!s! to location %2!s!" 0 0}  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources. Peak interconnect usage is %2!d!%%" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:01 " "Info: Fitter routing operations ending: elapsed time is 00:00:01" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0}
{ "Warning" "WFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN" "1 " "Warning: Following 1 pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" { { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "c\[0\] VCC " "Info: Pin c\[0\] has VCC driving its datain port" {  } { { "bcd.v" "" { Text "E:/Verilog/基础实验/二进制转BCD码/bcd.v" 8 -1 0 } } { "c:/altera/quartus60/win/Assignment Editor.qase" "" { Assignment "c:/altera/quartus60/win/Assignment Editor.qase" 1 { { 0 "c\[0\]" } } } } { "c:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "" { c[0] } "NODE_NAME" } } { "c:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "" { c[0] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0}  } {  } 0 0 "Following %1!d! pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" 0 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 1  Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_BANNER_TIME" "Sun Jan 11 21:24:23 2009 " "Info: Processing ended: Sun Jan 11 21:24:23 2009" {  } {  } 0 0 "Processing ended: %1!s!" 0 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:05 " "Info: Elapsed time: 00:00:05" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "E:/Verilog/基础实验/二进制转BCD码/bcd.fit.smsg " "Info: Generated suppressed messages file E:/Verilog/基础实验/二进制转BCD码/bcd.fit.smsg" {  } {  } 0 0 "Generated suppressed messages file %1!s!" 0 0}