testbackup.rpt

ISA板卡

Project Information                f:\workplace\tensie\speednew\testbackup.rpt

MAX+plus II Compiler Report File
Version 10.1 06/12/2001
Compiled: 05/17/2007 11:34:54

Copyright (C) 1988-2001 Altera Corporation
Any megafunction design, and related net list (encrypted or decrypted),
support information, device programming or simulation file, and any other
associated documentation or information provided by Altera or a partner
under Altera's Megafunction Partnership Program may be used only to
program PLD devices (but not masked PLD devices) from Altera.  Any other
use of such megafunction design, net list, support information, device
programming or simulation file, or any other related documentation or
information is prohibited for any other purpose, including, but not
limited to modification, reverse engineering, de-compiling, or use with
any other silicon devices, unless such use is explicitly licensed under
a separate agreement with Altera or a megafunction partner.  Title to
the intellectual property, including patents, copyrights, trademarks,
trade secrets, or maskworks, embodied in any such megafunction design,
net list, support information, device programming or simulation file, or
any other related documentation or information provided by Altera or a
megafunction partner, remains with Altera, the megafunction partner, or
their respective licensors.  No other licenses, including any licenses
needed under any third party's intellectual property, are provided herein.



***** Project compilation was successful




** DEVICE SUMMARY **

Chip/                     Input   Output   Bidir         Shareable
POF       Device          Pins    Pins     Pins     LCs  Expanders  % Utilized

testbackup
      EPM7160SLC84-10      37       3        8      121     25          75 %

User Pins:                 37       3        8  



Project Information                f:\workplace\tensie\speednew\testbackup.rpt

** PROJECT COMPILATION MESSAGES **

Warning: Ignored 'Power-Up High' logic option setting on registers -- it is not supported in the current device family
Info: Reserved unused input pin 'GCLK' for future use because it has a pin assignment -- pin is tri-stated and must be connected to your board
Info: Reserved unused input pin 'SBHE' for future use because it has a pin assignment -- pin is tri-stated and must be connected to your board
Info: Reserved unused input pin 'D15' for future use because it has a pin assignment -- pin is tri-stated and must be connected to your board
Info: Reserved unused input pin 'D14' for future use because it has a pin assignment -- pin is tri-stated and must be connected to your board
Info: Reserved unused input pin 'D13' for future use because it has a pin assignment -- pin is tri-stated and must be connected to your board
Info: Reserved unused input pin 'D12' for future use because it has a pin assignment -- pin is tri-stated and must be connected to your board
Info: Reserved unused input pin 'D11' for future use because it has a pin assignment -- pin is tri-stated and must be connected to your board
Info: Reserved unused input pin 'D10' for future use because it has a pin assignment -- pin is tri-stated and must be connected to your board
Info: Reserved unused input pin 'D9' for future use because it has a pin assignment -- pin is tri-stated and must be connected to your board
Info: Reserved unused input pin 'D8' for future use because it has a pin assignment -- pin is tri-stated and must be connected to your board
Info: Reserved unused input pin 'GCLK1' for future use because it has a pin assignment -- pin is tri-stated and must be connected to your board
Info: Reserved unused input pin 'RESET' for future use because it has a pin assignment -- pin is tri-stated and must be connected to your board
Info: Reserved unused input pin '/IOCS16' for future use because it has a pin assignment -- pin is tri-stated and must be connected to your board
Warning: Node ':268' has assignments but doesn't exist or is a primitive array -- edit the project's ACF to fix the problem
Warning: Node ':269' has assignments but doesn't exist or is a primitive array -- edit the project's ACF to fix the problem
Warning: Node ':744' has assignments but doesn't exist or is a primitive array -- edit the project's ACF to fix the problem
Warning: Node ':752' has assignments but doesn't exist or is a primitive array -- edit the project's ACF to fix the problem
Warning: Node ':756' has assignments but doesn't exist or is a primitive array -- edit the project's ACF to fix the problem
Warning: Node 'CC' has assignments but doesn't exist or is a primitive array -- edit the project's ACF to fix the problem
Warning: Node 'count-16t' has assignments but doesn't exist or is a primitive array -- edit the project's ACF to fix the problem
Warning: Node 'count24' has assignments but doesn't exist or is a primitive array -- edit the project's ACF to fix the problem
Warning: Node 'FRE-BACK' has assignments but doesn't exist or is a primitive array -- edit the project's ACF to fix the problem
Warning: Node 'SPEEDIN' has assignments but doesn't exist or is a primitive array -- edit the project's ACF to fix the problem
Warning: Node 'TEST' has assignments but doesn't exist or is a primitive array -- edit the project's ACF to fix the problem
Warning: Node 'test1' has assignments but doesn't exist or is a primitive array -- edit the project's ACF to fix the problem


Project Information                f:\workplace\tensie\speednew\testbackup.rpt

** PIN/LOCATION/CHIP ASSIGNMENTS **

                  Actual                  
    User       Assignments                
Assignments   (if different)     Node Name

testbackup@50                     AEN
testbackup@24                     A0
testbackup@25                     A1
testbackup@27                     A2
testbackup@28                     A3
testbackup@29                     A4
testbackup@30                     A5
testbackup@31                     A6
testbackup@33                     A7
testbackup@34                     A8
testbackup@35                     A9
testbackup@36                     A10
testbackup@37                     A11
testbackup@9                      A12
testbackup@40                     A13
testbackup@41                     A14
testbackup@44                     A15
testbackup@45                     A16
testbackup@8                      A17
testbackup@48                     A18
testbackup@49                     A19
testbackup@74    ---------        CC
testbackup@75                     CK0
testbackup@4                      CLK60M
testbackup@67                     D0
testbackup@61                     D1
testbackup@60                     D2
testbackup@68                     D3
testbackup@69                     D4
testbackup@56                     D5
testbackup@55                     D6
testbackup@54                     D7
testbackup@22                     D8
testbackup@21                     D9
testbackup@20                     D10
testbackup@18                     D11
testbackup@17                     D12
testbackup@16                     D13
testbackup@15                     D14
testbackup@12                     D15
testbackup@77    ---------        FRE-BACK
testbackup@83                     GCLK
testbackup@2                      GCLK1
testbackup@11                     /IOCS16
testbackup@65                     PB5A
testbackup@64                     PB7A
testbackup@51                     RD/
testbackup@1                      RESET
testbackup@10                     SBHE
testbackup@77    ---------        SPEEDIN
testbackup@76    ---------        TEST
testbackup@74    ---------        test1
testbackup@52                     WR/


Project Information                f:\workplace\tensie\speednew\testbackup.rpt

** FILE HIERARCHY **



|latch:456|
|latch:606|
|latch:454|
|latch:477|
|counter16:835|
|counter16:835|lpm_counter:lpm_counter_component|
|counter16:835|lpm_counter:lpm_counter_component|lpm_add_sub:add_sub|
|counter16:835|lpm_counter:lpm_counter_component|lpm_add_sub:add_sub|addcore:adder1|
|counter16:835|lpm_counter:lpm_counter_component|lpm_add_sub:add_sub|addcore:adder0|
|counter16:835|lpm_counter:lpm_counter_component|lpm_add_sub:add_sub|look_add:look_aheader|
|counter16:835|lpm_counter:lpm_counter_component|lpm_add_sub:add_sub|altshift:result_ext_latency_ffs|
|counter16:835|lpm_counter:lpm_counter_component|lpm_add_sub:add_sub|altshift:carry_ext_latency_ffs|
|counter16:835|lpm_counter:lpm_counter_component|lpm_add_sub:add_sub|altshift:oflow_ext_latency_ffs|
|counter16:835|lpm_counter:lpm_counter_component|lpm_constant:scdw|
|counter16:835|lpm_counter:lpm_counter_component|cmpconst:167|
|nor16:836|
|count24:837|
|count24:837|lpm_counter:lpm_counter_component|
|latch24s:862|
|latch24s:862|latch8:1|
|latch24s:862|latch8:3|
|latch24s:862|latch8:2|
|counter8:882|
|counter8:882|lpm_counter:lpm_counter_component|
|counter8:882|lpm_counter:lpm_counter_component|lpm_constant:sc|
|counter8:882|lpm_counter:lpm_counter_component|lpm_add_sub:add_sub|
|counter8:882|lpm_counter:lpm_counter_component|lpm_add_sub:add_sub|addcore:adder0|
|counter8:882|lpm_counter:lpm_counter_component|lpm_add_sub:add_sub|look_add:look_aheader|
|counter8:882|lpm_counter:lpm_counter_component|lpm_add_sub:add_sub|altshift:result_ext_latency_ffs|
|counter8:882|lpm_counter:lpm_counter_component|lpm_add_sub:add_sub|altshift:carry_ext_latency_ffs|
|counter8:882|lpm_counter:lpm_counter_component|lpm_add_sub:add_sub|altshift:oflow_ext_latency_ffs|
|counter8:882|lpm_counter:lpm_counter_component|lpm_constant:scdw|
|counter8:882|lpm_counter:lpm_counter_component|cmpconst:130|


Device-Specific Information:       f:\workplace\tensie\speednew\testbackup.rpt
testbackup

***** Logic for device 'testbackup' compiled without errors.




Device: EPM7160SLC84-10

Device Options:
    Turbo Bit                                    = ON
    Security Bit                                 = OFF
    Enable JTAG Support                        = ON
    User Code                                  = ffff