📄 zongtu.pin
字号:
-- Copyright (C) 1988-2001 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
N.C. = No Connect. This pin has no internal connection to the device.
VCCINT = Dedicated power pin, which MUST be connected to VCC (5.0 volts).
VCCIO = Dedicated power pin, which MUST be connected to VCC (5.0 volts).
GNDINT = Dedicated ground pin or unused dedicated input, which MUST be connected to GND.
GNDIO = Dedicated ground pin, which MUST be connected to GND.
RESERVED = Unused I/O pin, which MUST be left unconnected.
----------------------------------------------------------------------------
CHIP "zongtu" ASSIGNED TO AN EPF10K10LC84-3
clk_cdu : 1
161clr : 2
enable : 3
VCCINT : 4
dout3 : 5
adr4 : 6
adr3 : 7
adr6 : 8
RESERVED : 9
encdu : 10
cir_cdu : 11
DATA0 : 12
DCLK : 13
nCE : 14
TDI : 15
indata_b : 16
indata_g : 17
indata_d : 18
indata_a : 19
VCCINT : 20
dout0 : 21
dout6 : 22
adr0 : 23
adr7 : 24
adr2 : 25
GNDINT : 26
LDR5 : 27
adr1 : 28
LDR4 : 29
LDDR2 : 30
MSEL0 : 31
MSEL1 : 32
VCCINT : 33
nCONFIG : 34
sw_bus : 35
dout2 : 36
cpldar : 37
161pc : 38
LDAR : 39
VCCINT : 40
GNDINT : 41
ALU_BUS : 42
R5_BUS : 43
RD : 44
VCCINT : 45
GNDINT : 46
R4_BUS : 47
cir_181 : 48
scan_clk : 49
en_181 : 50
cn4 : 51
161load : 52
CN : 53
s3 : 54
nSTATUS : 55
TRST : 56
TMS : 57
indata_gw : 58
LDDR1 : 59
RESERVED : 60
indata_sw : 61
CP_T : 62
VCCINT : 63
s1 : 64
dout1 : 65
pc_bus : 66
dout4 : 67
GNDINT : 68
indata-f : 69
ndata_e : 70
indata_c : 71
s2 : 72
WE : 73
TDO : 74
nCEO : 75
CONF_DONE : 76
TCK : 77
RESERVED : 78
dout5 : 79
adr5 : 80
s0 : 81
GNDINT : 82
dout7 : 83
M : 84
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -