📄 finish.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.1 06/12/2001
-- Compiled: 04/19/2008 21:34:09
-- Copyright (C) 1988-2001 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "finish"
BEGIN
DEVICE = "EPF10K20TC144-3";
"ALU_BUS" : INPUT_PIN = 82 ;
"cir" : INPUT_PIN = 95 ;
"cir_181" : INPUT_PIN = 79 ;
"clk" : INPUT_PIN = 122 ;
"CN" : INPUT_PIN = 73 ;
"cp_t" : INPUT_PIN = 128 ;
"en" : INPUT_PIN = 92 ;
"en_181" : INPUT_PIN = 78 ;
"LDDR1" : INPUT_PIN = 88 ;
"LDDR2" : INPUT_PIN = 89 ;
"LDR4" : INPUT_PIN = 86 ;
"LDR5" : INPUT_PIN = 87 ;
"M" : INPUT_PIN = 72 ;
"R4_BUS" : INPUT_PIN = 80 ;
"R5_BUS" : INPUT_PIN = 81 ;
"scan_clk" : INPUT_PIN = 125 ;
"SW_BUS" : INPUT_PIN = 83 ;
"CN4" : OUTPUT_PIN = 21 ;
"GW" : OUTPUT_PIN = 8 ;
"seg_a" : OUTPUT_PIN = 51 ;
"seg_b" : OUTPUT_PIN = 49 ;
"seg_c" : OUTPUT_PIN = 48 ;
"seg_d" : OUTPUT_PIN = 47 ;
"seg_e" : OUTPUT_PIN = 46 ;
"seg-f" : OUTPUT_PIN = 44 ;
"seg_g" : OUTPUT_PIN = 43 ;
"SW" : OUTPUT_PIN = 102 ;
"s0" : OUTPUT_PIN = 9 ;
"s1" : OUTPUT_PIN = 10 ;
"s2" : OUTPUT_PIN = 12 ;
"s3" : OUTPUT_PIN = 13 ;
"D0" : BIDIR_PIN = 31 ;
"D1" : BIDIR_PIN = 32 ;
"D2" : BIDIR_PIN = 33 ;
"D3" : BIDIR_PIN = 36 ;
"D4" : BIDIR_PIN = 37 ;
"D5" : BIDIR_PIN = 38 ;
"D6" : BIDIR_PIN = 39 ;
"D7" : BIDIR_PIN = 41 ;
"|BCD_7SEG:81|:372" : LOCATION = LC1_B13;
"|BCD_7SEG:81|:444" : LOCATION = LC5_B16;
"|BCD_7SEG:81|:456" : LOCATION = LC1_B18;
"|BCD_7SEG:81|:492" : LOCATION = LC4_B16;
"|BCD_7SEG:81|:528" : LOCATION = LC4_B18;
"|BCD_7SEG:81|:540" : LOCATION = LC2_B18;
"|BCD_7SEG:81|:545" : LOCATION = LC8_B18;
"|BCD_7SEG:81|~567~1" : LOCATION = LC6_B16;
"|BCD_7SEG:81|:591" : LOCATION = LC3_B18;
"|BCD_7SEG:81|:633" : LOCATION = LC6_B18;
"|BCD_7SEG:81|:639" : LOCATION = LC5_B18;
"|BCD_7SEG:81|:663" : LOCATION = LC7_B16;
"|BCD_7SEG:81|:680" : LOCATION = LC8_B16;
"|BCD_7SEG:81|:687" : LOCATION = LC2_B16;
"|BCD_7SEG:81|~726~1" : LOCATION = LC3_B13;
"|BCD_7SEG:81|:734" : LOCATION = LC5_B13;
"|BCD_7SEG:81|:735" : LOCATION = LC2_B15;
"|BCD_7SEG:81|:755" : LOCATION = LC8_B13;
"|BCD_7SEG:81|:783" : LOCATION = LC4_B13;
"|BCD_7SEG:81|~783~1" : LOCATION = LC1_B16;
"|BCD_7SEG:81|:803" : LOCATION = LC2_B13;
"|BCD_7SEG:81|~816~1" : LOCATION = LC6_B13;
"|BCD_7SEG:81|~825~1" : LOCATION = LC3_B16;
"|BCD_7SEG:81|:831" : LOCATION = LC7_B13;
"|cdu16:50|74163:8|f74163:sub|:34" : LOCATION = LC4_F18; -- |cdu16:50|74163:8|f74163:sub|QA
"|cdu16:50|74163:8|f74163:sub|:111" : LOCATION = LC8_F18; -- |cdu16:50|74163:8|f74163:sub|QB
"|cdu16:50|74163:8|f74163:sub|:119" : LOCATION = LC7_F18;
"|cdu16:50|74163:8|f74163:sub|:122" : LOCATION = LC1_F18; -- |cdu16:50|74163:8|f74163:sub|QC
"|cdu16:50|74163:8|f74163:sub|:134" : LOCATION = LC2_F18; -- |cdu16:50|74163:8|f74163:sub|QD
"|cdu16:54|74163:8|f74163:sub|:34" : LOCATION = LC6_F11; -- |cdu16:54|74163:8|f74163:sub|QA
"|cdu16:54|74163:8|f74163:sub|:106" : LOCATION = LC5_F11;
"|cdu16:54|74163:8|f74163:sub|:111" : LOCATION = LC1_F11; -- |cdu16:54|74163:8|f74163:sub|QB
"|cdu16:54|74163:8|f74163:sub|:117" : LOCATION = LC2_F11;
"|cdu16:54|74163:8|f74163:sub|:122" : LOCATION = LC7_F11; -- |cdu16:54|74163:8|f74163:sub|QC
"|cdu16:54|74163:8|f74163:sub|:128" : LOCATION = LC7_F3 ;
"|cdu16:54|74163:8|f74163:sub|:134" : LOCATION = LC4_F3 ; -- |cdu16:54|74163:8|f74163:sub|QD
"|cdu16:56|74163:8|f74163:sub|:34" : LOCATION = LC2_F3 ; -- |cdu16:56|74163:8|f74163:sub|QA
"|cdu16:56|74163:8|f74163:sub|:111" : LOCATION = LC3_F3 ; -- |cdu16:56|74163:8|f74163:sub|QB
"|cdu16:56|74163:8|f74163:sub|:119" : LOCATION = LC6_F3 ;
"|cdu16:56|74163:8|f74163:sub|:122" : LOCATION = LC5_F3 ; -- |cdu16:56|74163:8|f74163:sub|QC
"|cdu16:56|74163:8|f74163:sub|:134" : LOCATION = LC8_F3 ; -- |cdu16:56|74163:8|f74163:sub|QD
"GW~1" : LOCATION = LC7_F8 ;
"|saomiao:78|74157:1|:22" : LOCATION = LC8_F11; -- |saomiao:78|74157:1|Y1
"|saomiao:78|74157:1|:23" : LOCATION = LC1_F8 ; -- |saomiao:78|74157:1|Y2
"|saomiao:78|74157:1|:24" : LOCATION = LC4_F11; -- |saomiao:78|74157:1|Y3
"|saomiao:78|74157:1|:25" : LOCATION = LC1_F3 ; -- |saomiao:78|74157:1|Y4
"SW~1" : LOCATION = LC3_F8 ;
":6" : LOCATION = LC4_F14;
":7" : LOCATION = LC1_F14;
":8" : LOCATION = LC3_F14;
":9" : LOCATION = LC2_F14;
"|74181:46|:43" : LOCATION = LC3_F20;
"|74181:46|:44" : LOCATION = LC2_F16;
"|74181:46|:45" : LOCATION = LC4_F20;
"|74181:46|:46" : LOCATION = LC2_F20;
"|74181:46|:47" : LOCATION = LC7_F16;
"|74181:46|:48" : LOCATION = LC1_F20;
"|74181:46|:51" : LOCATION = LC2_F19;
"|74181:46|:52" : LOCATION = LC3_F19;
"|74181:46|:74" : LOCATION = LC4_F19;
"|74181:46|~74~1" : LOCATION = LC2_F21;
"|74181:46|~75~1" : LOCATION = LC5_F21;
"|74181:46|:78" : LOCATION = LC5_F19; -- |74181:46|CN4
"|74181:46|~79~1" : LOCATION = LC2_F24;
"|74181:46|:80" : LOCATION = LC5_F24;
"|74181:46|:81" : LOCATION = LC4_F22;
"|74181:46|:82" : LOCATION = LC6_F21;
"|74181:47|:43" : LOCATION = LC2_F17;
"|74181:47|:44" : LOCATION = LC6_F18;
"|74181:47|:45" : LOCATION = LC2_F15;
"|74181:47|:46" : LOCATION = LC6_F22;
"|74181:47|:47" : LOCATION = LC5_F18;
"|74181:47|:48" : LOCATION = LC3_F15;
"|74181:47|:51" : LOCATION = LC3_F23;
"|74181:47|:52" : LOCATION = LC6_F16;
"|74181:47|:74" : LOCATION = LC2_F23;
"|74181:47|:78" : LOCATION = LC4_F23; -- |74181:47|CN4
"|74181:47|~78~1" : LOCATION = LC1_F17; -- |74181:47|CN4~1
"|74181:47|~78~2" : LOCATION = LC4_F15; -- |74181:47|CN4~2
"|74181:47|~78~3" : LOCATION = LC1_F15; -- |74181:47|CN4~3
"|74181:47|~80~1" : LOCATION = LC5_F17;
"|74181:47|:81" : LOCATION = LC3_F18;
"|74181:47|:82" : LOCATION = LC5_F15;
"|74244:48|~1~1~3" : LOCATION = LC3_F17;
"|74244:48|~1~1~3~2" : LOCATION = LC4_F17;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -