setup.tcl.bak

FPGA EP2C5Q288C8 串口原码,测试OK 打开即用.

#Setup.tcl 
# Setup pin setting for EP2C8|2C5 main board 
#QII中不能识别中文，在QII中使用请注意改为英文名
set_global_assignment -name RESERVE_ALL_UNUSED_PINS "AS INPUT TRI-STATED" 
set_global_assignment -name ENABLE_INIT_DONE_OUTPUT OFF 
set_location_assignment PIN_23 -to clk                                  
set_location_assignment PIN_206 -to rst

set_location_assignment PIN_11 -to seg_com\[0\]
set_location_assignment PIN_12 -to seg_com\[1\]
set_location_assignment PIN_8  -to seg_com\[2\]
set_location_assignment PIN_10 -to seg_com\[3\]

set_location_assignment PIN_170 -to sled\[0\]
set_location_assignment PIN_171 -to sled\[1\]
set_location_assignment PIN_173 -to sled\[2\]
set_location_assignment PIN_175 -to sled\[3\]


set_location_assignment PIN_15 -to seg_data\[0\] 
set_location_assignment PIN_13 -to seg_data\[1\]
set_location_assignment PIN_34 -to seg_data\[2\]
set_location_assignment PIN_31 -to seg_data\[3\]
set_location_assignment PIN_30 -to seg_data\[4\]
set_location_assignment PIN_14 -to seg_data\[5\]
set_location_assignment PIN_35 -to seg_data\[6\]
set_location_assignment PIN_33 -to seg_data\[7\]