prev_cmp_seg7led.fit.qmsg

FPGA EP2C5Q288C8 IR-LED 原码,测试OK 打开即用.

{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0 "" 0}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 7.2 Build 175 11/20/2007 Service Pack 1 SJ Full Version " "Info: Version 7.2 Build 175 11/20/2007 Service Pack 1 SJ Full Version" {  } {  } 0 0 "%1!s!" 0 0 "" 0} { "Info" "IQEXE_START_BANNER_TIME" "Thu May 29 20:08:39 2008 " "Info: Processing started: Thu May 29 20:08:39 2008" {  } {  } 0 0 "Processing started: %1!s!" 0 0 "" 0}  } {  } 4 0 "Running %2!s! %1!s!" 0 0 "" 0}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off seg7led -c seg7led " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off seg7led -c seg7led" {  } {  } 0 0 "Command: %1!s!" 0 0 "" 0}
{ "Info" "IMPP_MPP_USER_DEVICE" "seg7led EP2C5Q208C8 " "Info: Selected device EP2C5Q208C8 for design \"seg7led\"" {  } {  } 0 0 "Selected device %2!s! for design \"%1!s!\"" 0 0 "" 0}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Info: Low junction temperature is 0 degrees C" {  } {  } 0 0 "%1!s! is %2!s!" 0 0 "" 0}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "Info: High junction temperature is 85 degrees C" {  } {  } 0 0 "%1!s! is %2!s!" 0 0 "" 0}
{ "Info" "ICUT_CUT_PLL_COMPUTATION_SUCCESS" "clk~0 Cyclone II " "Info: Implemented PLL \"clk~0\" as Cyclone II PLL type" { { "Info" "ICUT_CUT_YGR_PLL_PARAMETERS_FACTORS" "clk~0 1 1 0 0 " "Info: Implementing clock multiplication of 1, clock division of 1, and phase shift of 0 degrees (0 ps) for clk~0 port" {  } { { "seg7led.bdf" "" { Schematic "E:/project/qii/yg2c58eb/ep2c5_project/ir_7led/ir_7led/seg7led.bdf" { { 64 -64 104 80 "clk" "" } } } }  } 0 0 "Implementing clock multiplication of %2!d!, clock division of %3!d!, and phase shift of %4!d! degrees (%5!d! ps) for %1!s! port" 0 0 "" 0}  } { { "seg7led.bdf" "" { Schematic "E:/project/qii/yg2c58eb/ep2c5_project/ir_7led/ir_7led/seg7led.bdf" { { 64 -64 104 80 "clk" "" } } } }  } 0 0 "Implemented PLL \"%1!s!\" as %2!s! PLL type" 0 0 "" 0}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Info: Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" {  } {  } 0 0 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "" 0}
{ "Info" "ITDC_FITTER_TIMING_ENGINE" "Classic " "Info: Fitter is using the Classic Timing Analyzer" {  } {  } 0 0 "Fitter is using the %1!s! Timing Analyzer" 0 0 "" 0}
{ "Info" "ITAN_TDC_USER_OPTIMIZATION_GOALS" "" "Info: Detected fmax, tsu, tco, and/or tpd requirements -- optimizing circuit to achieve only the specified requirements" {  } {  } 0 0 "Detected fmax, tsu, tco, and/or tpd requirements -- optimizing circuit to achieve only the specified requirements" 0 0 "" 0}
{ "Info" "IFITCC_FITCC_QID_PARTITION_BACK_ANNOTATION_TOP" "1 0 " "Info: The Fitter has identified 1 logical partitions of which 0 have a previous placement to use" { { "Info" "IFITCC_FITCC_QID_PARTITION_BACK_ANNOTATION_NONE_OVERRIDE" "256 Top " "Info: Previous placement does not exist for 256 of 256 atoms in partition Top" {  } {  } 0 0 "Previous placement does not exist for %1!d! of %1!d! atoms in partition %2!s!" 0 0 "" 0}  } {  } 0 0 "The Fitter has identified %1!d! logical partitions of which %2!d! have a previous placement to use" 0 0 "" 0}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C5Q208I8 " "Info: Device EP2C5Q208I8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C8Q208C8 " "Info: Device EP2C8Q208C8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C8Q208I8 " "Info: Device EP2C8Q208I8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0}  } {  } 2 0 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "" 0}
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "3 " "Info: Fitter converted 3 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ASDO~ 1 " "Info: Pin ~ASDO~ is reserved at location 1" {  } { { "e:/programfile/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "e:/programfile/altera/72/quartus/bin/pin_planner.ppl" { ~ASDO~ } } } { "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~ASDO~ } "NODE_NAME" } } { "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~ASDO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~nCSO~ 2 " "Info: Pin ~nCSO~ is reserved at location 2" {  } { { "e:/programfile/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "e:/programfile/altera/72/quartus/bin/pin_planner.ppl" { ~nCSO~ } } } { "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~nCSO~ } "NODE_NAME" } } { "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~nCSO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~LVDS41p/nCEO~ 108 " "Info: Pin ~LVDS41p/nCEO~ is reserved at location 108" {  } { { "e:/programfile/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "e:/programfile/altera/72/quartus/bin/pin_planner.ppl" { ~LVDS41p/nCEO~ } } } { "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~LVDS41p/nCEO~ } "NODE_NAME" } } { "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~LVDS41p/nCEO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0}  } {  } 0 0 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "" 0}
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "clk~0 (placed in counter C0 of PLL_1) " "Info: Automatically promoted node clk~0 (placed in counter C0 of PLL_1)" { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock CLKCTRL_G3 " "Info: Automatically promoted destinations to use location or clock signal Global Clock CLKCTRL_G3" {  } {  } 0 0 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0 "" 0}  } { { "seg7led.bdf" "" { Schematic "E:/project/qii/yg2c58eb/ep2c5_project/ir_7led/ir_7led/seg7led.bdf" { { 64 -64 104 80 "clk" "" } } } } { "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { clk~0 } "NODE_NAME" } } { "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { clk~0 } "NODE_NAME" } }  } 0 0 "Automatically promoted node %1!s! %2!s!" 0 0 "" 0}
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "irrecv:inst2\|ClkDevideOut  " "Info: Automatically promoted node irrecv:inst2\|ClkDevideOut " { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock " "Info: Automatically promoted destinations to use location or clock signal Global Clock" {  } {  } 0 0 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0 "" 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS" "" "Info: Following destination nodes may be non-global or may not use global or regional clocks" { { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "irrecv:inst2\|ClkDevideOut~156 " "Info: Destination node irrecv:inst2\|ClkDevideOut~156" {  } { { "irrecv.v" "" { Text "E:/project/qii/yg2c58eb/ep2c5_project/ir_7led/ir_7led/irrecv.v" 11 -1 0 } } { "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { irrecv:inst2|ClkDevideOut~156 } "NODE_NAME" } } { "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { irrecv:inst2|ClkDevideOut~156 } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0 "" 0}  } {  } 0 0 "Following destination nodes may be non-global or may not use global or regional clocks" 0 0 "" 0}  } { { "irrecv.v" "" { Text "E:/project/qii/yg2c58eb/ep2c5_project/ir_7led/ir_7led/irrecv.v" 11 -1 0 } } { "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { irrecv:inst2|ClkDevideOut } "NODE_NAME" } } { "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/programfile/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { irrecv:inst2|ClkDevideOut } "NODE_NAME" } }  } 0 0 "Automatically promoted node %1!s! %2!s!" 0 0 "" 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Info: Starting register packing" {  } {  } 0 0 "Starting register packing" 0 0 "" 0}
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Extra Info: Performing register packing on registers with non-logic cell location assignments" {  } {  } 1 0 "Performing register packing on registers with non-logic cell location assignments" 1 0 "" 0}
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Extra Info: Completed register packing on registers with non-logic cell location assignments" {  } {  } 1 0 "Completed register packing on registers with non-logic cell location assignments" 1 0 "" 0}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Extra Info: Started Fast Input/Output/OE register processing" {  } {  } 1 0 "Started Fast Input/Output/OE register processing" 1 0 "" 0}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Extra Info: Finished Fast Input/Output/OE register processing" {  } {  } 1 0 "Finished Fast Input/Output/OE register processing" 1 0 "" 0}