📄 q_reg.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.2 07/10/2002
-- Compiled: 12/09/2007 17:33:21
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "q_reg"
BEGIN
DEVICE = "EPF10K30ETC144-1";
"clk" : INPUT_PIN = 55 ;
"dest_ctl0" : INPUT_PIN = 126 ;
"dest_ctl1" : INPUT_PIN = 49 ;
"dest_ctl2" : INPUT_PIN = 142 ;
"dest_ctl3" : INPUT_PIN = 43 ;
"f10" : INPUT_PIN = 144 ;
"f11" : INPUT_PIN = 36 ;
"f12" : INPUT_PIN = 51 ;
"f13" : INPUT_PIN = 38 ;
"f14" : INPUT_PIN = 89 ;
"f15" : INPUT_PIN = 88 ;
"f16" : INPUT_PIN = 135 ;
"f17" : INPUT_PIN = 125 ;
"f18" : INPUT_PIN = 79 ;
"f19" : INPUT_PIN = 37 ;
"f20" : INPUT_PIN = 7 ;
"f21" : INPUT_PIN = 99 ;
"f22" : INPUT_PIN = 98 ;
"f23" : INPUT_PIN = 91 ;
"f24" : INPUT_PIN = 90 ;
"f25" : INPUT_PIN = 23 ;
"f26" : INPUT_PIN = 92 ;
"f27" : INPUT_PIN = 81 ;
"f28" : INPUT_PIN = 30 ;
"f29" : INPUT_PIN = 78 ;
"f110" : INPUT_PIN = 39 ;
"f111" : INPUT_PIN = 46 ;
"f112" : INPUT_PIN = 140 ;
"f113" : INPUT_PIN = 130 ;
"f114" : INPUT_PIN = 95 ;
"f115" : INPUT_PIN = 143 ;
"f210" : INPUT_PIN = 82 ;
"f211" : INPUT_PIN = 42 ;
"f212" : INPUT_PIN = 96 ;
"f213" : INPUT_PIN = 44 ;
"f214" : INPUT_PIN = 41 ;
"f215" : INPUT_PIN = 17 ;
"load" : INPUT_PIN = 56 ;
"qs_0" : INPUT_PIN = 102 ;
"qs_7" : INPUT_PIN = 80 ;
"qs_15" : INPUT_PIN = 97 ;
"rst" : INPUT_PIN = 54 ;
"w_ctl" : INPUT_PIN = 124 ;
"qs0" : OUTPUT_PIN = 8 ;
"qs7" : OUTPUT_PIN = 86 ;
"qs15" : OUTPUT_PIN = 27 ;
"q0" : OUTPUT_PIN = 13 ;
"q1" : OUTPUT_PIN = 10 ;
"q2" : OUTPUT_PIN = 9 ;
"q3" : OUTPUT_PIN = 22 ;
"q4" : OUTPUT_PIN = 20 ;
"q5" : OUTPUT_PIN = 19 ;
"q6" : OUTPUT_PIN = 21 ;
"q7" : OUTPUT_PIN = 48 ;
"q8" : OUTPUT_PIN = 33 ;
"q9" : OUTPUT_PIN = 131 ;
"q10" : OUTPUT_PIN = 32 ;
"q11" : OUTPUT_PIN = 31 ;
"q12" : OUTPUT_PIN = 14 ;
"q13" : OUTPUT_PIN = 18 ;
"q14" : OUTPUT_PIN = 12 ;
"q15" : OUTPUT_PIN = 11 ;
":47" : LOCATION = LC1_C19;
":49" : LOCATION = LC2_C33;
":51" : LOCATION = LC7_C33;
":53" : LOCATION = LC4_C32;
":55" : LOCATION = LC2_F28;
":57" : LOCATION = LC5_F28;
":59" : LOCATION = LC4_F24;
":61" : LOCATION = LC6_F30;
":63" : LOCATION = LC3_F24;
":65" : LOCATION = LC4_D25;
":67" : LOCATION = LC1_D25;
":69" : LOCATION = LC2_D34;
":71" : LOCATION = LC6_D34;
":73" : LOCATION = LC3_B19;
":75" : LOCATION = LC6_B19;
":77" : LOCATION = LC3_C33;
"~366~1" : LOCATION = LC1_F24;
"~366~2" : LOCATION = LC5_F24;
"~366~3" : LOCATION = LC6_F24;
"~366~4" : LOCATION = LC7_F24;
"~372~1" : LOCATION = LC6_D25;
"~372~2" : LOCATION = LC7_D25;
"~372~3" : LOCATION = LC8_D25;
"~378~1" : LOCATION = LC2_D25;
"~378~2" : LOCATION = LC3_D25;
"~378~3" : LOCATION = LC5_D25;
"~384~1" : LOCATION = LC5_D34;
"~384~2" : LOCATION = LC7_D34;
"~384~3" : LOCATION = LC8_D34;
"~390~1" : LOCATION = LC1_D34;
"~390~2" : LOCATION = LC3_D34;
"~390~3" : LOCATION = LC4_D34;
"~396~1" : LOCATION = LC5_B19;
"~396~2" : LOCATION = LC7_B19;
"~396~3" : LOCATION = LC8_B19;
"~402~1" : LOCATION = LC1_B19;
"~402~2" : LOCATION = LC2_B19;
"~402~3" : LOCATION = LC4_B19;
"~408~1" : LOCATION = LC2_A23;
"~408~2" : LOCATION = LC3_A23;
"~408~3" : LOCATION = LC6_C33;
"~408~4" : LOCATION = LC4_A23;
"~408~5" : LOCATION = LC6_F35;
"~408~6" : LOCATION = LC1_A23;
":517" : LOCATION = LC4_C33;
":524" : LOCATION = LC2_F24;
"~537~1" : LOCATION = LC5_F35;
":543" : LOCATION = LC8_F35;
"~550~1" : LOCATION = LC7_F35;
":935" : LOCATION = LC5_C19;
":948" : LOCATION = LC6_C19;
":959" : LOCATION = LC8_C19;
":960" : LOCATION = LC7_C19;
":974" : LOCATION = LC3_C19;
":981" : LOCATION = LC4_C19;
":986" : LOCATION = LC8_C33;
":987" : LOCATION = LC2_C19;
":1001" : LOCATION = LC7_C32;
":1008" : LOCATION = LC8_C32;
":1013" : LOCATION = LC5_C33;
":1014" : LOCATION = LC1_C32;
":1028" : LOCATION = LC2_C32;
":1035" : LOCATION = LC3_C32;
":1040" : LOCATION = LC6_C32;
":1041" : LOCATION = LC5_C32;
":1055" : LOCATION = LC6_F28;
":1062" : LOCATION = LC7_F28;
":1067" : LOCATION = LC2_F35;
":1068" : LOCATION = LC8_F28;
":1082" : LOCATION = LC1_F28;
":1089" : LOCATION = LC3_F28;
":1094" : LOCATION = LC4_F35;
":1095" : LOCATION = LC4_F28;
":1109" : LOCATION = LC7_F30;
":1116" : LOCATION = LC8_F30;
":1121" : LOCATION = LC8_F24;
":1122" : LOCATION = LC1_F30;
":1136" : LOCATION = LC2_F30;
":1143" : LOCATION = LC3_F30;
":1148" : LOCATION = LC5_F30;
":1149" : LOCATION = LC4_F30;
"~1156~1" : LOCATION = LC3_F35;
":1382" : LOCATION = LC1_C33;
"~1400~1" : LOCATION = LC2_E32;
":1418" : LOCATION = LC1_F35;
"~1436~1" : LOCATION = LC4_E16;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -