prev_cmp_adc_0820.fit.qmsg

使用VHDL语言描述AD0809芯片功能

{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "00:00:00 " "Info: Finished register packing: elapsed time is 00:00:00" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "Extra Info: No registers were packed into other blocks" {  } {  } 1 0 "No registers were packed into other blocks" 0 0 "" 0}  } {  } 0 0 "Finished register packing: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement " "Info: Statistics of I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement" { { "Info" "IFSAC_FSAC_SINGLE_IOC_GROUP_STATISTICS" "6 unused 3.30 2 3 1 " "Info: Number of I/O pins in group: 6 (unused VREF, 3.30 VCCIO, 2 input, 3 output, 1 bidirectional)" { { "Info" "IFSAC_FSAC_IO_STDS_IN_IOC_GROUP" "3.3-V LVTTL. " "Info: I/O standards used: 3.3-V LVTTL." {  } {  } 0 0 "I/O standards used: %1!s!" 0 0 "" 0}  } {  } 0 0 "Number of I/O pins in group: %1!d! (%2!s! VREF, %3!s! VCCIO, %4!d! input, %5!d! output, %6!d! bidirectional)" 0 0 "" 0}  } {  } 0 0 "Statistics of %1!s!" 0 0 "" 0}
{ "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "Info: I/O bank details before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Info: Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1 does not use undetermined 3 29 " "Info: I/O bank number 1 does not use VREF pins and has undetermined VCCIO pins. 3 total pin(s) used --  29 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use undetermined 0 35 " "Info: I/O bank number 2 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used --  35 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "3 does not use undetermined 1 34 " "Info: I/O bank number 3 does not use VREF pins and has undetermined VCCIO pins. 1 total pin(s) used --  34 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "4 does not use undetermined 0 36 " "Info: I/O bank number 4 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used --  36 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0}  } {  } 0 0 "Statistics of %1!s!" 0 0 "" 0}  } {  } 0 0 "I/O bank details %1!s! I/O pin placement" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "0.989 ns register register " "Info: Estimated most critical path is register to register delay of 0.989 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns now_state.st7 1 REG LAB_X1_Y8 3 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X1_Y8; Fanout = 3; REG Node = 'now_state.st7'" {  } { { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { now_state.st7 } "NODE_NAME" } } { "ADC_0820.vhd" "" { Text "D:/常用工具/优化大师/new AD/AD_port/AD_port_0820/ADC_0820/ADC_0820.vhd" 26 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(0.675 ns) + CELL(0.206 ns) 0.881 ns now_state.st7~28 2 COMB LAB_X1_Y8 1 " "Info: 2: + IC(0.675 ns) + CELL(0.206 ns) = 0.881 ns; Loc. = LAB_X1_Y8; Fanout = 1; COMB Node = 'now_state.st7~28'" {  } { { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "0.881 ns" { now_state.st7 now_state.st7~28 } "NODE_NAME" } } { "ADC_0820.vhd" "" { Text "D:/常用工具/优化大师/new AD/AD_port/AD_port_0820/ADC_0820/ADC_0820.vhd" 26 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.108 ns) 0.989 ns now_state.st8 3 REG LAB_X1_Y8 4 " "Info: 3: + IC(0.000 ns) + CELL(0.108 ns) = 0.989 ns; Loc. = LAB_X1_Y8; Fanout = 4; REG Node = 'now_state.st8'" {  } { { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "0.108 ns" { now_state.st7~28 now_state.st8 } "NODE_NAME" } } { "ADC_0820.vhd" "" { Text "D:/常用工具/优化大师/new AD/AD_port/AD_port_0820/ADC_0820/ADC_0820.vhd" 26 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "0.314 ns ( 31.75 % ) " "Info: Total cell delay = 0.314 ns ( 31.75 % )" {  } {  } 0 0 "Total cell delay = %1!s! %2!s!" 0 0 "" 0} { "Info" "ITDB_TOTAL_IC_DELAY" "0.675 ns ( 68.25 % ) " "Info: Total interconnect delay = 0.675 ns ( 68.25 % )" {  } {  } 0 0 "Total interconnect delay = %1!s! %2!s!" 0 0 "" 0}  } { { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "0.989 ns" { now_state.st7 now_state.st7~28 now_state.st8 } "NODE_NAME" } }  } 0 0 "Estimated most critical path is %2!s! to %3!s! delay of %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Info: Average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X0_Y10 X10_Y19 " "Info: Peak interconnect usage is 0% of the available device resources in the region that extends from location X0_Y10 to location X10_Y19" {  } {  } 0 0 "Peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "" 0}  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0 "" 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0 "" 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0 "" 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0 0 "Started post-fitting delay annotation" 0 0 "" 0}
{ "Warning" "WDAT_NO_LOADING_SPECIFIED_ONE_OR_MORE_PINS" "4 " "Warning: Found 4 output pins without output pin load capacitance assignment" { { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "wr_rdy 0 " "Info: Pin \"wr_rdy\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "cs_bar 0 " "Info: Pin \"cs_bar\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "rd_bar 0 " "Info: Pin \"rd_bar\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "lock 0 " "Info: Pin \"lock\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0}  } {  } 0 0 "Found %1!d! output pins without output pin load capacitance assignment" 0 0 "" 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0 0 "Delay annotation completed successfully" 0 0 "" 0}
{ "Warning" "WFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE" "1 " "Warning: Following 1 pins have no output enable or a GND or VCC output enable - later changes to this connectivity may change fitting results" { { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "wr_rdy a permanently enabled " "Info: Pin wr_rdy has a permanently enabled output enable" {  } { { "d:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/72/quartus/bin/pin_planner.ppl" { wr_rdy } } } { "ADC_0820.vhd" "" { Text "D:/常用工具/优化大师/new AD/AD_port/AD_port_0820/ADC_0820/ADC_0820.vhd" 12 -1 0 } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { wr_rdy } "NODE_NAME" } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { wr_rdy } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0}  } {  } 0 0 "Following %1!d! pins have no output enable or a GND or VCC output enable - later changes to this connectivity may change fitting results" 0 0 "" 0}
{ "Warning" "WFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN" "1 " "Warning: Following 1 pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" { { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "cs_bar GND " "Info: Pin cs_bar has GND driving its datain port" {  } { { "d:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/72/quartus/bin/pin_planner.ppl" { cs_bar } } } { "ADC_0820.vhd" "" { Text "D:/常用工具/优化大师/new AD/AD_port/AD_port_0820/ADC_0820/ADC_0820.vhd" 10 -1 0 } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { cs_bar } "NODE_NAME" } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { cs_bar } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0}  } {  } 0 0 "Following %1!d! pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" 0 0 "" 0}
{ "Warning" "WFIOMGR_RESERVE_ASSIGNMENT_FOR_UNUSED_PINS_IS_DEFAULT" "As output driving ground " "Warning: The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'." {  } {  } 0 0 "The Reserve All Unused Pins setting has not been specified, and will default to '%1!s!'." 0 0 "" 0}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "D:/常用工具/优化大师/new AD/AD_port/AD_port_0820/ADC_0820/ADC_0820.fit.smsg " "Info: Generated suppressed messages file D:/常用工具/优化大师/new AD/AD_port/AD_port_0820/ADC_0820/ADC_0820.fit.smsg" {  } {  } 0 0 "Generated suppressed messages file %1!s!" 0 0 "" 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 7 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 7 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "177 " "Info: Allocated 177 megabytes of memory during processing" {  } {  } 0 0 "Allocated %1!s! megabytes of memory during processing" 0 0 "" 0} { "Info" "IQEXE_END_BANNER_TIME" "Tue May 20 11:18:11 2008 " "Info: Processing ended: Tue May 20 11:18:11 2008" {  } {  } 0 0 "Processing ended: %1!s!" 0 0 "" 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Info: Elapsed time: 00:00:04" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0 "" 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "" 0}