📄 crc16bits.pin
字号:
-- Copyright (C) 1991-2004 Altera Corporation
-- Any megafunction design, and related netlist (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only
-- to program PLD devices (but not masked PLD devices) from Altera. Any
-- other use of such megafunction design, netlist, support information,
-- device programming or simulation file, or any other related documentation
-- or information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to the
-- intellectual property, including patents, copyrights, trademarks, trade
-- secrets, or maskworks, embodied in any such megafunction design, netlist,
-- support information, device programming or simulation file, or any other
-- related documentation or information provided by Altera or a megafunction
-- partner, remains with Altera, the megafunction partner, or their respective
-- licensors. No other licenses, including any licenses needed under any third
-- party's intellectual property, are provided herein.
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
-- NC : No Connect. This pin has no internal connection to the device.
-- VCCINT : Dedicated power pin, which MUST be connected to VCC (3.3V).
-- VCCIO : Dedicated power pin, which MUST be connected to VCC (Refer to
-- the table below for voltage).
-- GND : Dedicated ground pin. Dedicated GND pins MUST be connected to GND.
-- It can also be used to report unused dedicated pins. The connection
-- on the board for unused dedicated pins depends on whether this will
-- be used in a future design. One example is device migration. When
-- using device migration, refer to the device pin-tables. If it is a
-- GND pin in the pin table or if it will not be used in a future design
-- for another purpose the it MUST be connected to GND. If it is an unused
-- dedicated pin, then it can be connected to a valid signal on the board
-- (low, high, or toggling) if that signal is required for a different
-- revision of the design.
-- GND+ : Unused input pin. It can also be used to report unused dual-purpose pins.
-- This pin should be connected to GND. It may also be connected to a
-- valid signal on the board (low, high, or toggling) if that signal
-- is required for a different revision of the design.
-- GND* : Unused I/O pin. This pin can either be left unconnected or
-- connected to GND. Connecting this pin to GND will improve the
-- device's immunity to noise.
-- NON_MIGRATABLE: This pin cannot be migrated.
---------------------------------------------------------------------------------
Quartus II Version 4.0 Build 190 1/28/2004 SJ Full Version
CHIP "CRC16bits" ASSIGNED TO AN: EPM3064ATC100-4
Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment
-------------------------------------------------------------------------------------------------------------
NC : 1 : : : : :
NC : 2 : : : : :
VCCIO : 3 : power : : 3.3V : :
TDI : 4 : input : LVTTL : : : N
NC : 5 : : : : :
valid : 6 : output : LVTTL : : : N
NC : 7 : : : : :
crc_out[4] : 8 : output : LVTTL : : : N
crc_out[3] : 9 : output : LVTTL : : : N
crc_out[0] : 10 : output : LVTTL : : : N
GND : 11 : gnd : : : :
crc_out[15] : 12 : output : LVTTL : : : N
crc_out[8] : 13 : output : LVTTL : : : N
GND* : 14 : : : : :
TMS : 15 : input : LVTTL : : : N
crc_in[5] : 16 : input : LVTTL : : : N
crc_in[3] : 17 : input : LVTTL : : : N
VCCIO : 18 : power : : 3.3V : :
crc_in[14] : 19 : input : LVTTL : : : N
crc_in[13] : 20 : input : LVTTL : : : N
GND* : 21 : : : : :
NC : 22 : : : : :
GND* : 23 : : : : :
NC : 24 : : : : :
GND* : 25 : : : : :
GND : 26 : gnd : : : :
NC : 27 : : : : :
NC : 28 : : : : :
crc_in[12] : 29 : input : LVTTL : : : N
crc_out[10] : 30 : output : LVTTL : : : N
crc_out[11] : 31 : output : LVTTL : : : N
crc_out[12] : 32 : output : LVTTL : : : N
GND : 33 : gnd : : : :
VCCIO : 34 : power : : 3.3V : :
crc_out[13] : 35 : output : LVTTL : : : N
crc_out[14] : 36 : output : LVTTL : : : N
crc_out[1] : 37 : output : LVTTL : : : N
GND : 38 : gnd : : : :
VCCINT : 39 : power : : 3.3V : :
GND* : 40 : : : : :
GND* : 41 : : : : :
GND* : 42 : : : : :
GND : 43 : gnd : : : :
crc_in[7] : 44 : input : LVTTL : : : N
crc_in[10] : 45 : input : LVTTL : : : N
data_in[3] : 46 : input : LVTTL : : : N
data_in[5] : 47 : input : LVTTL : : : N
crc_in[11] : 48 : input : LVTTL : : : N
NC : 49 : : : : :
NC : 50 : : : : :
VCCIO : 51 : power : : 3.3V : :
GND* : 52 : : : : :
GND : 53 : gnd : : : :
GND* : 54 : : : : :
NC : 55 : : : : :
GND* : 56 : : : : :
data_in[7] : 57 : input : LVTTL : : : N
crc_in[0] : 58 : input : LVTTL : : : N
GND : 59 : gnd : : : :
crc_in[15] : 60 : input : LVTTL : : : N
crc_in[4] : 61 : input : LVTTL : : : N
TCK : 62 : input : LVTTL : : : N
GND* : 63 : : : : :
GND* : 64 : : : : :
GND : 65 : gnd : : : :
VCCIO : 66 : power : : 3.3V : :
crc_in[6] : 67 : input : LVTTL : : : N
crc_in[8] : 68 : input : LVTTL : : : N
GND* : 69 : : : : :
NC : 70 : : : : :
data_in[0] : 71 : input : LVTTL : : : N
NC : 72 : : : : :
TDO : 73 : output : LVTTL : : : N
GND : 74 : gnd : : : :
data_in[6] : 75 : input : LVTTL : : : N
GND* : 76 : : : : :
NC : 77 : : : : :
GND : 78 : gnd : : : :
GND* : 79 : : : : :
GND* : 80 : : : : :
crc_in[1] : 81 : input : LVTTL : : : N
VCCIO : 82 : power : : 3.3V : :
crc_in[2] : 83 : input : LVTTL : : : N
crc_in[9] : 84 : input : LVTTL : : : N
data_in[1] : 85 : input : LVTTL : : : N
GND : 86 : gnd : : : :
GND+ : 87 : : : : :
GND+ : 88 : : : : :
GND+ : 89 : : : : :
GND+ : 90 : : : : :
VCCINT : 91 : power : : 3.3V : :
data_in[2] : 92 : input : LVTTL : : : N
data_in[4] : 93 : input : LVTTL : : : N
EN : 94 : input : LVTTL : : : N
GND : 95 : gnd : : : :
crc_out[7] : 96 : output : LVTTL : : : N
crc_out[6] : 97 : output : LVTTL : : : N
crc_out[5] : 98 : output : LVTTL : : : N
crc_out[2] : 99 : output : LVTTL : : : N
crc_out[9] : 100 : output : LVTTL : : : N
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -