i8051_all.ucf

8051 VHDL IP Core

#### UCF file created by Project Navigator

# i8051_all.ucf
# used for i8051_all.vhd

NET "clk"	LOC = "P77";
NET "rst_lo"	LOC = "P61";

NET "p0_out<0>"	LOC = "P181";
NET "p0_out<1>"	LOC = "P187";
NET "p0_out<2>"	LOC = "P188";
NET "p0_out<3>"	LOC = "P189";
NET "p0_out<4>"	LOC = "P191";
NET "p0_out<5>"	LOC = "P192";
NET "p0_out<6>"	LOC = "P193";
NET "p0_out<7>"	LOC = "P194";

NET "p0_in<0>"	LOC = "P195";
NET "p0_in<1>"	LOC = "P199";
NET "p0_in<2>"	LOC = "P200";
NET "p0_in<3>"	LOC = "P201";
NET "p0_in<4>"	LOC = "P202";
NET "p0_in<5>"	LOC = "P203";
NET "p0_in<6>"	LOC = "P204";
NET "p0_in<7>"	LOC = "P205";

NET "p1_out<0>"	LOC = "P160";
NET "p1_out<1>"	LOC = "P161";
NET "p1_out<2>"	LOC = "P162";
NET "p1_out<3>"	LOC = "P163";
NET "p1_out<4>"	LOC = "P164";
NET "p1_out<5>"	LOC = "P165";
NET "p1_out<6>"	LOC = "P166";
NET "p1_out<7>"	LOC = "P167";

NET "p1_in<0>"	LOC = "P168";
NET "p1_in<1>"	LOC = "P172";
NET "p1_in<2>"	LOC = "P173";
NET "p1_in<3>"	LOC = "P174";
NET "p1_in<4>"	LOC = "P175";
NET "p1_in<5>"	LOC = "P176";
NET "p1_in<6>"	LOC = "P178";
NET "p1_in<7>"	LOC = "P179";

NET "p2_out<0>"	LOC = "P49";
NET "p2_out<1>"	LOC = "P57";
NET "p2_out<2>"	LOC = "P58";
NET "p2_out<3>"	LOC = "P59";
NET "p2_out<4>"	LOC = "P60";
NET "p2_out<5>"	LOC = "P81";
NET "p2_out<6>"	LOC = "P62";
NET "p2_out<7>"	LOC = "P63";

NET "p2_in<0>"	LOC = "P67";
NET "p2_in<1>"	LOC = "P68";
NET "p2_in<2>"	LOC = "P69";
NET "p2_in<3>"	LOC = "P70";
NET "p2_in<4>"	LOC = "P71";
NET "p2_in<5>"	LOC = "P73";
NET "p2_in<6>"	LOC = "P74";
NET "p2_in<7>"	LOC = "P75";

NET "p3_out<0>"	LOC = "P82";
NET "p3_out<1>"	LOC = "P83";
NET "p3_out<2>"	LOC = "P84";
NET "p3_out<3>"	LOC = "P86";
NET "p3_out<4>"	LOC = "P87";
NET "p3_out<5>"	LOC = "P88";
NET "p3_out<6>"	LOC = "P89";
NET "p3_out<7>"	LOC = "P90";

NET "p3_in<0>"	LOC = "P94";
NET "p3_in<1>"	LOC = "P95";
NET "p3_in<2>"	LOC = "P96";
NET "p3_in<3>"	LOC = "P97";
NET "p3_in<4>"	LOC = "P98";
NET "p3_in<5>"	LOC = "P99";
NET "p3_in<6>"	LOC = "P100";
NET "p3_in<7>"	LOC = "P101";

# Turn on LED (setting particular bit P2.0), works!
#INST u_rom_u_rom0 INIT_00 = FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE80A0C2;

# Turn on LED (setting whole port P2), works!
#INST u_rom_u_rom0 INIT_00 = FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB8000A075;

# Turn on/off LED based on port P0.7, works!
#INST u_rom_u_rom0 INIT_00 = 208704C2A080F9D2A080F5FFFFFFFFFFFFFFFFFFFFF580A0D2F980A0C2048720;

# Blink the LED, works!
INST u_rom_u_rom0 INIT_00 = 00000000320000000000000032000000000000003200000000000000325D0002;
INST u_rom_u_rom0 INIT_01 = 507AA0C222008275FE803C001200000000000000320000000000000032000000;
INST u_rom_u_rom0 INIT_02 = 07817522E080F7704BEA1B01FFBA1AC37B507AA0D2F7704BEA1B01FFBA1AC37B;
INST u_rom_u_rom0 INIT_03 = 00000000000000000000000000000000000000330002330002036082E5380012;