total.map.rpt

数字显示当前的小时、分钟、秒； 2、可以预置为12小时计时显示和24小时计时显示； 3、一个调节键

; ONE_INPUT_IS_CONSTANT  ; YES         ; Untyped                               ;
; LPM_PIPELINE           ; 0           ; Untyped                               ;
; MAXIMIZE_SPEED         ; 5           ; Untyped                               ;
; REGISTERED_AT_END      ; 0           ; Untyped                               ;
; OPTIMIZE_FOR_SPEED     ; 1           ; Untyped                               ;
; USE_CS_BUFFERS         ; 1           ; Untyped                               ;
; CARRY_CHAIN            ; MANUAL      ; Untyped                               ;
; CARRY_CHAIN_LENGTH     ; 48          ; CARRY_CHAIN_LENGTH                    ;
; DEVICE_FAMILY          ; ACEX1K      ; Untyped                               ;
; USE_WYS                ; OFF         ; Untyped                               ;
; STYLE                  ; FAST        ; Untyped                               ;
; CBXI_PARAMETER         ; add_sub_olh ; Untyped                               ;
; AUTO_CARRY_CHAINS      ; ON          ; AUTO_CARRY                            ;
; IGNORE_CARRY_BUFFERS   ; OFF         ; IGNORE_CARRY                          ;
; AUTO_CASCADE_CHAINS    ; ON          ; AUTO_CASCADE                          ;
; IGNORE_CASCADE_BUFFERS ; OFF         ; IGNORE_CASCADE                        ;
+------------------------+-------------+---------------------------------------+
Note: In order to hide this table in the UI and the text report file, please set the "Show Parameter Settings Tables in Synthesis Report" option in "Analysis and Synthesis Settings -> More Settings" to "Off".


+-------------------------------+
; Analysis & Synthesis Messages ;
+-------------------------------+
Info: *******************************************************************
Info: Running Quartus II Analysis & Synthesis
    Info: Version 7.2 Build 151 09/26/2007 SJ Full Version
    Info: Processing started: Thu Oct 30 12:01:27 2008
Info: Command: quartus_map --read_settings_files=on --write_settings_files=off TOTAL -c TOTAL
Info: Found 1 design units, including 1 entities, in source file fenp.bdf
    Info: Found entity 1: fenp
Info: Found 2 design units, including 1 entities, in source file CLK_CHOOSE.vhd
    Info: Found design unit 1: CLK_CHOOSE-BEHAV
    Info: Found entity 1: CLK_CHOOSE
Info: Found 2 design units, including 1 entities, in source file HOUR.vhd
    Info: Found design unit 1: HOUR-BEHAV
    Info: Found entity 1: HOUR
Info: Found 2 design units, including 1 entities, in source file MINUTE.vhd
    Info: Found design unit 1: MINUTE-MIN
    Info: Found entity 1: MINUTE
Info: Found 2 design units, including 1 entities, in source file second.vhd
    Info: Found design unit 1: SECOND-SEC
    Info: Found entity 1: SECOND
Info: Found 2 design units, including 1 entities, in source file seltime.vhd
    Info: Found design unit 1: SELTIME-FUN
    Info: Found entity 1: SELTIME
Info: Found 1 design units, including 1 entities, in source file TOTAL.bdf
    Info: Found entity 1: TOTAL
Info: Found 2 design units, including 1 entities, in source file ALERT.vhd
    Info: Found design unit 1: ALERT-SSS_ARC
    Info: Found entity 1: ALERT
Info: Elaborating entity "TOTAL" for the top level hierarchy
Warning: Processing legacy GDF or BDF entity "TOTAL" with Max+Plus II bus and instance naming rules
Info: Elaborating entity "HOUR" for hierarchy "HOUR:inst3"
Info: Elaborating entity "CLK_CHOOSE" for hierarchy "CLK_CHOOSE:inst2"
Warning (10492): VHDL Process Statement warning at CLK_CHOOSE.vhd(28): signal "SEC_COUT" is read inside the Process Statement but isn't in the Process Statement's sensitivity list
Warning (10492): VHDL Process Statement warning at CLK_CHOOSE.vhd(29): signal "MIN_COUT" is read inside the Process Statement but isn't in the Process Statement's sensitivity list
Info: Elaborating entity "fenp" for hierarchy "fenp:inst9"
Warning: Processing legacy GDF or BDF entity "fenp" with Max+Plus II bus and instance naming rules
Info: Found 1 design units, including 1 entities, in source file e:/quartus ii/quartus ii/quartus/libraries/others/maxplus2/7490.bdf
    Info: Found entity 1: 7490
Info: Elaborating entity "7490" for hierarchy "fenp:inst9|7490:12"
Warning: Processing legacy GDF or BDF entity "7490" with Max+Plus II bus and instance naming rules
Info: Elaborated megafunction instantiation "fenp:inst9|7490:12"
Info: Elaborating entity "SECOND" for hierarchy "SECOND:inst1"
Info: Elaborating entity "MINUTE" for hierarchy "MINUTE:inst"
Warning (10492): VHDL Process Statement warning at MINUTE.vhd(14): signal "RESET" is read inside the Process Statement but isn't in the Process Statement's sensitivity list
Info: Elaborating entity "ALERT" for hierarchy "ALERT:inst6"
Info: Elaborating entity "SELTIME" for hierarchy "SELTIME:inst5"
Warning (10492): VHDL Process Statement warning at seltime.vhd(25): signal "COUNT" is read inside the Process Statement but isn't in the Process Statement's sensitivity list
Warning (10492): VHDL Process Statement warning at seltime.vhd(26): signal "SEC0" is read inside the Process Statement but isn't in the Process Statement's sensitivity list
Warning (10492): VHDL Process Statement warning at seltime.vhd(27): signal "SEC1" is read inside the Process Statement but isn't in the Process Statement's sensitivity list
Warning (10492): VHDL Process Statement warning at seltime.vhd(28): signal "MIN0" is read inside the Process Statement but isn't in the Process Statement's sensitivity list
Warning (10492): VHDL Process Statement warning at seltime.vhd(29): signal "MIN1" is read inside the Process Statement but isn't in the Process Statement's sensitivity list
Warning (10492): VHDL Process Statement warning at seltime.vhd(30): signal "H0" is read inside the Process Statement but isn't in the Process Statement's sensitivity list
Warning (10492): VHDL Process Statement warning at seltime.vhd(31): signal "H1" is read inside the Process Statement but isn't in the Process Statement's sensitivity list
Info: Inferred 2 megafunctions from design logic
    Info: Inferred adder/subtractor megafunction ("lpm_add_sub") from the following logic: "HOUR:inst3|Add1"
    Info: Inferred adder/subtractor megafunction ("lpm_add_sub") from the following logic: "HOUR:inst3|Add0"
Info: Found 1 design units, including 1 entities, in source file e:/quartus ii/quartus ii/quartus/libraries/megafunctions/lpm_add_sub.tdf
    Info: Found entity 1: lpm_add_sub
Info: Elaborated megafunction instantiation "HOUR:inst3|lpm_add_sub:Add1"
Info: Found 1 design units, including 1 entities, in source file e:/quartus ii/quartus ii/quartus/libraries/megafunctions/addcore.tdf
    Info: Found entity 1: addcore
Info: Elaborated megafunction instantiation "HOUR:inst3|lpm_add_sub:Add1|addcore:adder", which is child of megafunction instantiation "HOUR:inst3|lpm_add_sub:Add1"
Info: Instantiated megafunction "HOUR:inst3|lpm_add_sub:Add1" with the following parameter:
    Info: Parameter "LPM_WIDTH" = "8"
    Info: Parameter "LPM_DIRECTION" = "ADD"
    Info: Parameter "LPM_REPRESENTATION" = "UNSIGNED"
    Info: Parameter "ONE_INPUT_IS_CONSTANT" = "YES"
Info: Found 1 design units, including 1 entities, in source file e:/quartus ii/quartus ii/quartus/libraries/megafunctions/a_csnbuffer.tdf
    Info: Found entity 1: a_csnbuffer
Info: Elaborated megafunction instantiation "HOUR:inst3|lpm_add_sub:Add1|addcore:adder|a_csnbuffer:oflow_node", which is child of megafunction instantiation "HOUR:inst3|lpm_add_sub:Add1"
Info: Instantiated megafunction "HOUR:inst3|lpm_add_sub:Add1" with the following parameter:
    Info: Parameter "LPM_WIDTH" = "8"
    Info: Parameter "LPM_DIRECTION" = "ADD"
    Info: Parameter "LPM_REPRESENTATION" = "UNSIGNED"
    Info: Parameter "ONE_INPUT_IS_CONSTANT" = "YES"
Info: Elaborated megafunction instantiation "HOUR:inst3|lpm_add_sub:Add1|addcore:adder|a_csnbuffer:result_node", which is child of megafunction instantiation "HOUR:inst3|lpm_add_sub:Add1"
Info: Instantiated megafunction "HOUR:inst3|lpm_add_sub:Add1" with the following parameter:
    Info: Parameter "LPM_WIDTH" = "8"
    Info: Parameter "LPM_DIRECTION" = "ADD"
    Info: Parameter "LPM_REPRESENTATION" = "UNSIGNED"
    Info: Parameter "ONE_INPUT_IS_CONSTANT" = "YES"
Info: Found 1 design units, including 1 entities, in source file e:/quartus ii/quartus ii/quartus/libraries/megafunctions/altshift.tdf
    Info: Found entity 1: altshift
Info: Elaborated megafunction instantiation "HOUR:inst3|lpm_add_sub:Add1|altshift:result_ext_latency_ffs", which is child of megafunction instantiation "HOUR:inst3|lpm_add_sub:Add1"
Info: Instantiated megafunction "HOUR:inst3|lpm_add_sub:Add1" with the following parameter:
    Info: Parameter "LPM_WIDTH" = "8"
    Info: Parameter "LPM_DIRECTION" = "ADD"
    Info: Parameter "LPM_REPRESENTATION" = "UNSIGNED"
    Info: Parameter "ONE_INPUT_IS_CONSTANT" = "YES"
Info: Elaborated megafunction instantiation "HOUR:inst3|lpm_add_sub:Add1|altshift:carry_ext_latency_ffs", which is child of megafunction instantiation "HOUR:inst3|lpm_add_sub:Add1"
Info: Instantiated megafunction "HOUR:inst3|lpm_add_sub:Add1" with the following parameter:
    Info: Parameter "LPM_WIDTH" = "8"
    Info: Parameter "LPM_DIRECTION" = "ADD"
    Info: Parameter "LPM_REPRESENTATION" = "UNSIGNED"
    Info: Parameter "ONE_INPUT_IS_CONSTANT" = "YES"
Info: Elaborated megafunction instantiation "HOUR:inst3|lpm_add_sub:Add0"
Warning: The ACEX1K Device Family is not supported by the TimeQuest Timing Analyzer. Defaulting to classic Timing Analyzer
Warning (14130): Reduced register "SECOND:inst1|CNT1[3]" with stuck data_in port to stuck value GND
Warning (14130): Reduced register "MINUTE:inst|CNT1[3]" with stuck data_in port to stuck value GND
Info: Implemented 111 device resources after synthesis - the final resource count might be different
    Info: Implemented 7 input pins
    Info: Implemented 9 output pins
    Info: Implemented 95 logic cells
Info: Quartus II Analysis & Synthesis was successful. 0 errors, 16 warnings
    Info: Allocated 160 megabytes of memory during processing
    Info: Processing ended: Thu Oct 30 12:01:40 2008
    Info: Elapsed time: 00:00:13