⭐ 欢迎来到虫虫下载站！ | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站
📤 上传资源

📄 total.rpp.talkback.xml

📁 数字显示当前的小时、分钟、秒； 2、可以预置为12小时计时显示和24小时计时显示； 3、一个调节键
💻 XML
📖 第 1 页 / 共 3 页
字号:
🔍
123 
		<location_assigned_by>Fitter</location_assigned_by>
		<load>Unspecified</load>
	</row>
	<row>
		<name>RESULT_OUT[2]</name>
		<pin__>E15</pin__>
		<i_o_bank>3</i_o_bank>
		<x_coordinate>12</x_coordinate>
		<y_coordinate>31</y_coordinate>
		<cell_number>3</cell_number>
		<output_register>no</output_register>
		<output_enable_register>no</output_enable_register>
		<power_up_high>no</power_up_high>
		<slow_slew_rate>no</slow_slew_rate>
		<pci_i_o_enabled>no</pci_i_o_enabled>
		<open_drain>no</open_drain>
		<tri_primitive>no</tri_primitive>
		<bus_hold>no</bus_hold>
		<weak_pull_up>Off</weak_pull_up>
		<i_o_standard>LVTTL</i_o_standard>
		<current_strength>24mA</current_strength>
		<termination>Off</termination>
		<location_assigned_by>Fitter</location_assigned_by>
		<load>Unspecified</load>
	</row>
	<row>
		<name>RESULT_OUT[3]</name>
		<pin__>B15</pin__>
		<i_o_bank>3</i_o_bank>
		<x_coordinate>12</x_coordinate>
		<y_coordinate>31</y_coordinate>
		<cell_number>1</cell_number>
		<output_register>no</output_register>
		<output_enable_register>no</output_enable_register>
		<power_up_high>no</power_up_high>
		<slow_slew_rate>no</slow_slew_rate>
		<pci_i_o_enabled>no</pci_i_o_enabled>
		<open_drain>no</open_drain>
		<tri_primitive>no</tri_primitive>
		<bus_hold>no</bus_hold>
		<weak_pull_up>Off</weak_pull_up>
		<i_o_standard>LVTTL</i_o_standard>
		<current_strength>24mA</current_strength>
		<termination>Off</termination>
		<location_assigned_by>Fitter</location_assigned_by>
		<load>Unspecified</load>
	</row>
	<row>
		<name>RESULT_OUT[4]</name>
		<pin__>N14</pin__>
		<i_o_bank>8</i_o_bank>
		<x_coordinate>17</x_coordinate>
		<y_coordinate>0</y_coordinate>
		<cell_number>2</cell_number>
		<output_register>no</output_register>
		<output_enable_register>no</output_enable_register>
		<power_up_high>no</power_up_high>
		<slow_slew_rate>no</slow_slew_rate>
		<pci_i_o_enabled>no</pci_i_o_enabled>
		<open_drain>no</open_drain>
		<tri_primitive>no</tri_primitive>
		<bus_hold>no</bus_hold>
		<weak_pull_up>Off</weak_pull_up>
		<i_o_standard>LVTTL</i_o_standard>
		<current_strength>24mA</current_strength>
		<termination>Off</termination>
		<location_assigned_by>Fitter</location_assigned_by>
		<load>Unspecified</load>
	</row>
	<row>
		<name>RESULT_OUT[5]</name>
		<pin__>AB16</pin__>
		<i_o_bank>8</i_o_bank>
		<x_coordinate>9</x_coordinate>
		<y_coordinate>0</y_coordinate>
		<cell_number>5</cell_number>
		<output_register>no</output_register>
		<output_enable_register>no</output_enable_register>
		<power_up_high>no</power_up_high>
		<slow_slew_rate>no</slow_slew_rate>
		<pci_i_o_enabled>no</pci_i_o_enabled>
		<open_drain>no</open_drain>
		<tri_primitive>no</tri_primitive>
		<bus_hold>no</bus_hold>
		<weak_pull_up>Off</weak_pull_up>
		<i_o_standard>LVTTL</i_o_standard>
		<current_strength>24mA</current_strength>
		<termination>Off</termination>
		<location_assigned_by>Fitter</location_assigned_by>
		<load>Unspecified</load>
	</row>
	<row>
		<name>RESULT_OUT[6]</name>
		<pin__>E14</pin__>
		<i_o_bank>3</i_o_bank>
		<x_coordinate>17</x_coordinate>
		<y_coordinate>31</y_coordinate>
		<cell_number>0</cell_number>
		<output_register>no</output_register>
		<output_enable_register>no</output_enable_register>
		<power_up_high>no</power_up_high>
		<slow_slew_rate>no</slow_slew_rate>
		<pci_i_o_enabled>no</pci_i_o_enabled>
		<open_drain>no</open_drain>
		<tri_primitive>no</tri_primitive>
		<bus_hold>no</bus_hold>
		<weak_pull_up>Off</weak_pull_up>
		<i_o_standard>LVTTL</i_o_standard>
		<current_strength>24mA</current_strength>
		<termination>Off</termination>
		<location_assigned_by>Fitter</location_assigned_by>
		<load>Unspecified</load>
	</row>
	<row>
		<name>SEL[0]</name>
		<pin__>T15</pin__>
		<i_o_bank>8</i_o_bank>
		<x_coordinate>12</x_coordinate>
		<y_coordinate>0</y_coordinate>
		<cell_number>4</cell_number>
		<output_register>no</output_register>
		<output_enable_register>no</output_enable_register>
		<power_up_high>no</power_up_high>
		<slow_slew_rate>no</slow_slew_rate>
		<pci_i_o_enabled>no</pci_i_o_enabled>
		<open_drain>no</open_drain>
		<tri_primitive>no</tri_primitive>
		<bus_hold>no</bus_hold>
		<weak_pull_up>Off</weak_pull_up>
		<i_o_standard>LVTTL</i_o_standard>
		<current_strength>24mA</current_strength>
		<termination>Off</termination>
		<location_assigned_by>Fitter</location_assigned_by>
		<load>Unspecified</load>
	</row>
	<row>
		<name>SEL[1]</name>
		<pin__>V14</pin__>
		<i_o_bank>8</i_o_bank>
		<x_coordinate>17</x_coordinate>
		<y_coordinate>0</y_coordinate>
		<cell_number>4</cell_number>
		<output_register>no</output_register>
		<output_enable_register>no</output_enable_register>
		<power_up_high>no</power_up_high>
		<slow_slew_rate>no</slow_slew_rate>
		<pci_i_o_enabled>no</pci_i_o_enabled>
		<open_drain>no</open_drain>
		<tri_primitive>no</tri_primitive>
		<bus_hold>no</bus_hold>
		<weak_pull_up>Off</weak_pull_up>
		<i_o_standard>LVTTL</i_o_standard>
		<current_strength>24mA</current_strength>
		<termination>Off</termination>
		<location_assigned_by>Fitter</location_assigned_by>
		<load>Unspecified</load>
	</row>
	<row>
		<name>SEL[2]</name>
		<pin__>AB15</pin__>
		<i_o_bank>8</i_o_bank>
		<x_coordinate>12</x_coordinate>
		<y_coordinate>0</y_coordinate>
		<cell_number>0</cell_number>
		<output_register>no</output_register>
		<output_enable_register>no</output_enable_register>
		<power_up_high>no</power_up_high>
		<slow_slew_rate>no</slow_slew_rate>
		<pci_i_o_enabled>no</pci_i_o_enabled>
		<open_drain>no</open_drain>
		<tri_primitive>no</tri_primitive>
		<bus_hold>no</bus_hold>
		<weak_pull_up>Off</weak_pull_up>
		<i_o_standard>LVTTL</i_o_standard>
		<current_strength>24mA</current_strength>
		<termination>Off</termination>
		<location_assigned_by>Fitter</location_assigned_by>
		<load>Unspecified</load>
	</row>
</output_pins>
<i_o_bank_usage>
	<row>
		<i_o_bank>1</i_o_bank>
		<usage>0 / 29 ( 0 % )</usage>
		<vccio_voltage>3.3V</vccio_voltage>
	</row>
	<row>
		<i_o_bank>2</i_o_bank>
		<usage>1 / 30 ( 3 % )</usage>
		<vccio_voltage>3.3V</vccio_voltage>
	</row>
	<row>
		<i_o_bank>3</i_o_bank>
		<usage>3 / 51 ( 6 % )</usage>
		<vccio_voltage>3.3V</vccio_voltage>
	</row>
	<row>
		<i_o_bank>4</i_o_bank>
		<usage>1 / 52 ( 2 % )</usage>
		<vccio_voltage>3.3V</vccio_voltage>
	</row>
	<row>
		<i_o_bank>5</i_o_bank>
		<usage>2 / 29 ( 7 % )</usage>
		<vccio_voltage>3.3V</vccio_voltage>
	</row>
	<row>
		<i_o_bank>6</i_o_bank>
		<usage>0 / 29 ( 0 % )</usage>
		<vccio_voltage>3.3V</vccio_voltage>
	</row>
	<row>
		<i_o_bank>7</i_o_bank>
		<usage>0 / 52 ( 0 % )</usage>
		<vccio_voltage>3.3V</vccio_voltage>
	</row>
	<row>
		<i_o_bank>8</i_o_bank>
		<usage>12 / 51 ( 24 % )</usage>
		<vccio_voltage>3.3V</vccio_voltage>
	</row>
	<row>
		<i_o_bank>9</i_o_bank>
		<usage>0 / 6 ( 0 % )</usage>
		<vccio_voltage>3.3V</vccio_voltage>
	</row>
	<row>
		<i_o_bank>11</i_o_bank>
		<usage>0 / 6 ( 0 % )</usage>
		<vccio_voltage>3.3V</vccio_voltage>
	</row>
</i_o_bank_usage>
<advanced_data___general>
	<row>
		<name>Status Code</name>
		<value>0</value>
	</row>
	<row>
		<name>Desired User Slack</name>
		<value>0</value>
	</row>
	<row>
		<name>Fit Attempts</name>
		<value>1</value>
	</row>
</advanced_data___general>
<advanced_data___placement_preparation>
	<row>
		<name>Auto Fit Point 1 - Fit Attempt 1</name>
		<value>ff</value>
	</row>
	<row>
		<name>Mid Wire Use - Fit Attempt 1</name>
		<value>0</value>
	</row>
	<row>
		<name>Mid Slack - Fit Attempt 1</name>
		<value>990200</value>
	</row>
	<row>
		<name>Internal Atom Count - Fit Attempt 1</name>
		<value>70</value>
	</row>
	<row>
		<name>LE/ALM Count - Fit Attempt 1</name>
		<value>70</value>
	</row>
	<row>
		<name>LAB Count - Fit Attempt 1</name>
		<value>9</value>
	</row>
	<row>
		<name>Outputs per Lab - Fit Attempt 1</name>
		<value>5.556</value>
	</row>
	<row>
		<name>Inputs per LAB - Fit Attempt 1</name>
		<value>6.333</value>
	</row>
	<row>
		<name>Global Inputs per LAB - Fit Attempt 1</name>
		<value>1.222</value>
	</row>
	<row>
		<name>LAB Constraint &apos;non-global clock / CE pair + async load&apos; - Fit Attempt 1</name>
		<value>0:9</value>
	</row>
	<row>
		<name>LAB Constraint &apos;ce + sync load&apos; - Fit Attempt 1</name>
		<value>0:7;1:2</value>
	</row>
	<row>
		<name>LAB Constraint &apos;non-global controls&apos; - Fit Attempt 1</name>
		<value>0:6;1:3</value>
	</row>
	<row>
		<name>LAB Constraint &apos;un-route combination&apos; - Fit Attempt 1</name>
		<value>0:6;1:3</value>
	</row>
	<row>
		<name>LAB Constraint &apos;non-global with asyn_clear&apos; - Fit Attempt 1</name>
		<value>0:4;1:2;2:3</value>
	</row>
	<row>
		<name>LAB Constraint &apos;un-route with async_clear&apos; - Fit Attempt 1</name>
		<value>0:4;1:2;2:3</value>
	</row>
	<row>
		<name>LAB Constraint &apos;non-global async clear + sync clear&apos; - Fit Attempt 1</name>
		<value>0:8;1:1</value>
	</row>
	<row>
		<name>LAB Constraint &apos;global non-clock/non-asynch_clear&apos; - Fit Attempt 1</name>
		<value>0:9</value>
	</row>
	<row>
		<name>LAB Constraint &apos;ygr_cl_ngclk_gclkce_sload_aload_constraint&apos; - Fit Attempt 1</name>
		<value>0:7;1:2</value>
	</row>
	<row>
		<name>LAB Constraint &apos;global control signals&apos; - Fit Attempt 1</name>
		<value>0:3;1:1;2:5</value>
	</row>
	<row>
		<name>LAB Constraint &apos;clock / ce pair constraint&apos; - Fit Attempt 1</name>
		<value>0:3;1:4;2:2</value>
	</row>
	<row>
		<name>LAB Constraint &apos;aload_aclr pair with aload used&apos; - Fit Attempt 1</name>
		<value>0:9</value>
	</row>
	<row>
		<name>LAB Constraint &apos;aload_aclr pair&apos; - Fit Attempt 1</name>
		<value>0:3;1:4;2:2</value>
	</row>
	<row>
		<name>LAB Constraint &apos;sload_sclear pair&apos; - Fit Attempt 1</name>
		<value>0:8;1:1</value>
	</row>
	<row>
		<name>LAB Constraint &apos;invert_a constraint&apos; - Fit Attempt 1</name>
		<value>0:1;1:8</value>
	</row>
	<row>
		<name>LAB Constraint &apos;has placement constraint&apos; - Fit Attempt 1</name>
		<value>0:9</value>
	</row>
	<row>
		<name>LEs in Chains - Fit Attempt 1</name>
		<value>8</value>
	</row>
	<row>
		<name>LEs in Long Chains - Fit Attempt 1</name>
		<value>0</value>
	</row>
	<row>
		<name>LABs with Chains - Fit Attempt 1</name>
		<value>1</value>
	</row>
	<row>
		<name>LABs with Multiple Chains - Fit Attempt 1</name>
		<value>0</value>
	</row>
	<row>
		<name>Time - Fit Attempt 1</name>
		<value>0</value>
	</row>
</advanced_data___placement_preparation>
<advanced_data___placement>
	<row>
		<name>Auto Fit Point 2 - Fit Attempt 1</name>
		<value>ff</value>
	</row>
	<row>
		<name>Early Wire Use - Fit Attempt 1</name>
		<value>0</value>
	</row>
	<row>
		<name>Early Slack - Fit Attempt 1</name>
		<value>978834</value>
	</row>
	<row>
		<name>Auto Fit Point 3 - Fit Attempt 1</name>
		<value>ff</value>
	</row>
	<row>
		<name>Mid Wire Use - Fit Attempt 1</name>
		<value>0</value>
	</row>
	<row>
		<name>Mid Slack - Fit Attempt 1</name>
		<value>986445</value>
	</row>
	<row>
		<name>Auto Fit Point 4 - Fit Attempt 1</name>
		<value>ff</value>
	</row>
	<row>
		<name>Late Wire Use - Fit Attempt 1</name>
		<value>0</value>
	</row>
	<row>
		<name>Late Slack - Fit Attempt 1</name>
		<value>986445</value>
	</row>
	<row>
		<name>Auto Fit Point 5 - Fit Attempt 1</name>
		<value>ff</value>
	</row>
	<row>
		<name>Time - Fit Attempt 1</name>
		<value>0</value>
	</row>
	<row>
		<name>Time in tsm_dat.dll - Fit Attempt 1</name>
		<value>0.031</value>
	</row>
	<row>
		<name>Time in tsm_tan.dll - Fit Attempt 1</name>
		<value>0.032</value>
	</row>
</advanced_data___placement>
<advanced_data___routing>
	<row>
		<name>Early Slack - Fit Attempt 1</name>
		<value>987355</value>
	</row>
	<row>
		<name>Early Wire Use - Fit Attempt 1</name>
		<value>0</value>
	</row>
	<row>
		<name>Peak Regional Wire - Fit Attempt 1</name>
		<value>1</value>
	</row>
	<row>
		<name>Mid Slack - Fit Attempt 1</name>
		<value>986337</value>
	</row>
	<row>
		<name>Late Slack - Fit Attempt 1</name>
		<value>986337</value>
	</row>
	<row>
		<name>Late Slack - Fit Attempt 1</name>
		<value>986337</value>
	</row>
	<row>
		<name>Late Wire Use - Fit Attempt 1</name>
		<value>0</value>
	</row>
	<row>
		<name>Time - Fit Attempt 1</name>
		<value>1</value>
	</row>
	<row>
		<name>Time in tsm_tan.dll - Fit Attempt 1</name>
		<value>0.093</value>
	</row>
</advanced_data___routing>
</talkback>
123

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -