📄 lcd_283rb06.map.rpt
字号:
; data[3][5] ; Stuck at GND due to stuck port data_in ;
; data[3][6] ; Stuck at GND due to stuck port data_in ;
; data[3][7] ; Stuck at GND due to stuck port data_in ;
; data[3][8] ; Stuck at GND due to stuck port data_in ;
; data[3][9] ; Stuck at GND due to stuck port data_in ;
; data[3][10] ; Stuck at GND due to stuck port data_in ;
; data[3][11] ; Stuck at GND due to stuck port data_in ;
; data[3][12] ; Stuck at GND due to stuck port data_in ;
; data[3][13] ; Stuck at GND due to stuck port data_in ;
; data[3][14] ; Stuck at GND due to stuck port data_in ;
; data[3][15] ; Stuck at GND due to stuck port data_in ;
; data[4][0] ; Stuck at GND due to stuck port data_in ;
; data[4][1] ; Stuck at GND due to stuck port data_in ;
; data[4][2] ; Stuck at GND due to stuck port data_in ;
; data[4][3] ; Stuck at GND due to stuck port data_in ;
; data[4][4] ; Stuck at GND due to stuck port data_in ;
; data[4][5] ; Stuck at GND due to stuck port data_in ;
; data[4][6] ; Stuck at GND due to stuck port data_in ;
; data[4][7] ; Stuck at GND due to stuck port data_in ;
; data[4][8] ; Stuck at VCC due to stuck port data_in ;
; data[4][9] ; Stuck at GND due to stuck port data_in ;
; data[4][10] ; Stuck at GND due to stuck port data_in ;
; data[4][11] ; Stuck at GND due to stuck port data_in ;
; data[4][12] ; Stuck at GND due to stuck port data_in ;
; data[4][13] ; Stuck at GND due to stuck port data_in ;
; data[4][14] ; Stuck at GND due to stuck port data_in ;
; data[4][15] ; Stuck at GND due to stuck port data_in ;
; data[5][0] ; Stuck at GND due to stuck port data_in ;
; data[5][1] ; Stuck at GND due to stuck port data_in ;
; data[5][2] ; Stuck at GND due to stuck port data_in ;
; data[5][3] ; Stuck at GND due to stuck port data_in ;
; data[5][4] ; Stuck at GND due to stuck port data_in ;
; data[5][5] ; Stuck at GND due to stuck port data_in ;
; data[5][6] ; Stuck at GND due to stuck port data_in ;
; data[5][7] ; Stuck at GND due to stuck port data_in ;
; data[5][8] ; Stuck at VCC due to stuck port data_in ;
; data[5][9] ; Stuck at VCC due to stuck port data_in ;
; data[5][10] ; Stuck at VCC due to stuck port data_in ;
; data[5][11] ; Stuck at GND due to stuck port data_in ;
; data[5][12] ; Stuck at GND due to stuck port data_in ;
; data[5][13] ; Stuck at GND due to stuck port data_in ;
; data[5][14] ; Stuck at GND due to stuck port data_in ;
; data[5][15] ; Stuck at GND due to stuck port data_in ;
; Total Number of Removed Registers = 1730 ; ;
+------------------------------------------+----------------------------------------+
* Table truncated at 100 items. To change the number of removed registers reported, set the "Number of Removed Registers Reported" option under Assignments->Settings->Analysis and Synthesis Settings->More Settings
+------------------------------------------------------------------------------------+
; Removed Registers Triggering Further Register Optimizations ;
+---------------+---------------------------+----------------------------------------+
; Register name ; Reason for Removal ; Registers Removed due to This Register ;
+---------------+---------------------------+----------------------------------------+
; data[0][14] ; Stuck at GND ; data_temp[14] ;
; ; due to stuck port data_in ; ;
; id_data[6] ; Stuck at VCC ; id_data_cmd[6] ;
; ; due to stuck port data_in ; ;
; id_data[7] ; Stuck at GND ; id_data_cmd[7] ;
; ; due to stuck port data_in ; ;
+---------------+---------------------------+----------------------------------------+
+------------------------------------------------------+
; General Register Statistics ;
+----------------------------------------------+-------+
; Statistic ; Value ;
+----------------------------------------------+-------+
; Total registers ; 262 ;
; Number of registers using Synchronous Clear ; 138 ;
; Number of registers using Synchronous Load ; 10 ;
; Number of registers using Asynchronous Clear ; 205 ;
; Number of registers using Asynchronous Load ; 0 ;
; Number of registers using Clock Enable ; 114 ;
; Number of registers using Preset ; 0 ;
+----------------------------------------------+-------+
+---------------------------------------------------+
; Inverted Register Statistics ;
+-----------------------------------------+---------+
; Inverted Register ; Fan out ;
+-----------------------------------------+---------+
; pic_num[0] ; 35 ;
; cs~reg0 ; 2 ;
; sclk~reg0 ; 2 ;
; sdi~reg0 ; 2 ;
; hsync~reg0 ; 1 ;
; vsync~reg0 ; 1 ;
; enable~reg0 ; 1 ;
; ce1~reg0 ; 5 ;
; data_temp[6] ; 1 ;
; data_temp[0] ; 1 ;
; data_temp[5] ; 1 ;
; data_temp[7] ; 1 ;
; data_temp[1] ; 1 ;
; sw1_out1_reg ; 5 ;
; sw4_out1_reg ; 5 ;
; Total number of inverted registers = 15 ; ;
+-----------------------------------------+---------+
+-----------------------------------------------------------------------------------------------------------------------------------------------+
; Multiplexer Restructuring Statistics (Restructuring Performed) ;
+--------------------+-----------+---------------+----------------------+------------------------+------------+---------------------------------+
; Multiplexer Inputs ; Bus Width ; Baseline Area ; Area if Restructured ; Saving if Restructured ; Registered ; Example Multiplexer Output ;
+--------------------+-----------+---------------+----------------------+------------------------+------------+---------------------------------+
; 3:1 ; 6 bits ; 12 LEs ; 6 LEs ; 6 LEs ; Yes ; |lcd_283rb06|i[0] ;
; 3:1 ; 4 bits ; 8 LEs ; 0 LEs ; 8 LEs ; Yes ; |lcd_283rb06|count_reset[3] ;
; 4:1 ; 25 bits ; 50 LEs ; 50 LEs ; 0 LEs ; Yes ; |lcd_283rb06|bit_transfered[24] ;
; 5:1 ; 3 bits ; 9 LEs ; 3 LEs ; 6 LEs ; Yes ; |lcd_283rb06|number[10] ;
; 5:1 ; 21 bits ; 63 LEs ; 21 LEs ; 42 LEs ; Yes ; |lcd_283rb06|A[3]~reg0 ;
; 110:1 ; 16 bits ; 1168 LEs ; 1040 LEs ; 128 LEs ; Yes ; |lcd_283rb06|data_temp[12] ;
; 6:1 ; 2 bits ; 8 LEs ; 8 LEs ; 0 LEs ; Yes ; |lcd_283rb06|red[1]~reg0 ;
; 6:1 ; 4 bits ; 16 LEs ; 12 LEs ; 4 LEs ; Yes ; |lcd_283rb06|green[1]~reg0 ;
; 7:1 ; 4 bits ; 16 LEs ; 16 LEs ; 0 LEs ; Yes ; |lcd_283rb06|red[2]~reg0 ;
; 7:1 ; 8 bits ; 32 LEs ; 32 LEs ; 0 LEs ; Yes ; |lcd_283rb06|blue[2]~reg0 ;
; 68:1 ; 2 bits ; 90 LEs ; 4 LEs ; 86 LEs ; Yes ; |lcd_283rb06|ce3~reg0 ;
; 3:1 ; 3 bits ; 6 LEs ; 3 LEs ; 3 LEs ; No ; |lcd_283rb06|state~15 ;
; 5:1 ; 2 bits ; 6 LEs ; 2 LEs ; 4 LEs ; No ; |lcd_283rb06|state~8 ;
+--------------------+-----------+---------------+----------------------+------------------------+------------+---------------------------------+
+-----------------------------------------------------------------------------+
; Parameter Settings for User Entity Instance: Top-level Entity: |lcd_283rb06 ;
+----------------+---------------------+--------------------------------------+
; Parameter Name ; Value ; Type ;
+----------------+---------------------+--------------------------------------+
; IDLE ; 0001 ; Unsigned Binary ;
; START ; 0010 ; Unsigned Binary ;
; DATA1 ; 0100 ; Unsigned Binary ;
; STOP ; 1000 ; Unsigned Binary ;
; s1 ; 001 ; Unsigned Binary ;
; s2 ; 010 ; Unsigned Binary ;
; delay ; 100 ; Unsigned Binary ;
; PIC06 ; 0000000000000000000 ; Unsigned Binary ;
; S00 ; 000 ; Unsigned Binary ;
; S01 ; 001 ; Unsigned Binary ;
; S02 ; 010 ; Unsigned Binary ;
; S03 ; 011 ; Unsigned Binary ;
; S04 ; 100 ; Unsigned Binary ;
+----------------+---------------------+--------------------------------------+
Note: In order to hide this table in the UI and the text report file, please set the "Show Parameter Settings Tables in Synthesis Report" option in "Analysis and Synthesis Settings -> More Settings" to "Off".
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -