lcd_283rb06.qsf

液晶显示驱动源程序代码

# Copyright (C) 1991-2007 Altera Corporation
# Your use of Altera Corporation's design tools, logic functions 
# and other software and tools, and its AMPP partner logic 
# functions, and any output files from any of the foregoing 
# (including device programming or simulation files), and any 
# associated documentation or information are expressly subject 
# to the terms and conditions of the Altera Program License 
# Subscription Agreement, Altera MegaCore Function License 
# Agreement, or other applicable license agreement, including, 
# without limitation, that your use is for the sole purpose of 
# programming logic devices manufactured by Altera and sold by 
# Altera or its authorized distributors.  Please refer to the 
# applicable agreement for further details.


# The default values for assignments are stored in the file
#		lcd_283rb06_assignment_defaults.qdf
# If this file doesn't exist, and for assignments not listed, see file
#		assignment_defaults.qdf

# Altera recommends that you do not modify this file. This
# file is updated automatically by the Quartus II software
# and any changes you make may be lost or overwritten.


set_global_assignment -name DEVICE EP2C5T144C8
set_global_assignment -name FAMILY "Cyclone II"
set_global_assignment -name TOP_LEVEL_ENTITY lcd_283rb06
set_global_assignment -name ORIGINAL_QUARTUS_VERSION 7.1
set_global_assignment -name PROJECT_CREATION_TIME_DATE "09:18:21  APRIL 27, 2008"
set_global_assignment -name LAST_QUARTUS_VERSION 7.1
set_instance_assignment -name PARTITION_HIERARCHY no_file_for_top_partition -to | -section_id Top
set_global_assignment -name PARTITION_NETLIST_TYPE SOURCE -section_id Top
set_location_assignment PIN_17 -to clock
set_location_assignment PIN_24 -to cs
set_location_assignment PIN_9 -to sclk
set_location_assignment PIN_30 -to sdi
set_global_assignment -name STRATIX_CONFIGURATION_DEVICE EPCS1
set_global_assignment -name RESERVE_ASDO_AFTER_CONFIGURATION "AS INPUT TRI-STATED"
set_global_assignment -name RESERVE_ALL_UNUSED_PINS "AS INPUT TRI-STATED"
set_global_assignment -name CYCLONEII_CONFIGURATION_SCHEME "ACTIVE SERIAL"
set_global_assignment -name RESERVE_ALL_UNUSED_PINS_NO_OUTPUT_GND "AS INPUT TRI-STATED"
set_global_assignment -name SIMULATION_MODE TIMING
set_global_assignment -name VERILOG_FILE lcd_init.v
set_global_assignment -name VECTOR_WAVEFORM_FILE lcd_283rb06.vwf
set_location_assignment PIN_57 -to red[0]
set_location_assignment PIN_58 -to red[1]
set_location_assignment PIN_59 -to red[2]
set_location_assignment PIN_60 -to red[3]
set_location_assignment PIN_63 -to red[4]
set_location_assignment PIN_64 -to red[5]
set_location_assignment PIN_47 -to green[0]
set_location_assignment PIN_48 -to green[1]
set_location_assignment PIN_51 -to green[2]
set_location_assignment PIN_52 -to green[3]
set_location_assignment PIN_53 -to green[4]
set_location_assignment PIN_55 -to green[5]
set_location_assignment PIN_40 -to blue[0]
set_location_assignment PIN_41 -to blue[1]
set_location_assignment PIN_42 -to blue[2]
set_location_assignment PIN_43 -to blue[3]
set_location_assignment PIN_44 -to blue[4]
set_location_assignment PIN_45 -to blue[5]
set_location_assignment PIN_28 -to dotclk
set_location_assignment PIN_27 -to enable
set_location_assignment PIN_25 -to hsync
set_location_assignment PIN_26 -to vsync
set_location_assignment PIN_139 -to A[18]
set_location_assignment PIN_137 -to A[17]
set_location_assignment PIN_136 -to A[16]
set_location_assignment PIN_135 -to A[15]
set_location_assignment PIN_134 -to A[14]
set_location_assignment PIN_133 -to A[13]
set_location_assignment PIN_132 -to A[12]
set_location_assignment PIN_129 -to A[11]
set_location_assignment PIN_126 -to A[10]
set_location_assignment PIN_125 -to A[9]
set_location_assignment PIN_122 -to A[8]
set_location_assignment PIN_121 -to A[7]
set_location_assignment PIN_120 -to A[6]
set_location_assignment PIN_119 -to A[5]
set_location_assignment PIN_118 -to A[4]
set_location_assignment PIN_115 -to A[3]
set_location_assignment PIN_114 -to A[2]
set_location_assignment PIN_113 -to A[1]
set_location_assignment PIN_112 -to A[0]
set_location_assignment PIN_93 -to ce
set_location_assignment PIN_96 -to oe
set_location_assignment PIN_94 -to we
set_location_assignment PIN_101 -to sw4
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to sw4
set_location_assignment PIN_79 -to penirq
set_location_assignment PIN_80 -to sclo
set_location_assignment PIN_81 -to sdao
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to sclo
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to sdao
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to sw1
set_location_assignment PIN_97 -to sw1
set_location_assignment PIN_65 -to db18
set_location_assignment PIN_67 -to db19
set_location_assignment PIN_69 -to db20
set_location_assignment PIN_70 -to db21
set_location_assignment PIN_71 -to db22
set_location_assignment PIN_72 -to db23
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to blue
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to green
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to red
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to db18
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to db19
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to db20
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to db21
set_location_assignment PIN_99 -to sw2
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to sw2
set_location_assignment PIN_141 -to A[19]
set_location_assignment PIN_92 -to A[20]
set_location_assignment PIN_73 -to ce1
set_location_assignment PIN_74 -to ce2
set_location_assignment PIN_93 -to ce3
set_location_assignment PIN_8 -to rd