ds1307_lcd.fit.qmsg

通过IIC总线读写实时时钟DS1307

{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0 "" 0 0}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 8.0 Build 215 05/29/2008 SJ Web Edition " "Info: Version 8.0 Build 215 05/29/2008 SJ Web Edition" {  } {  } 0 0 "%1!s!" 0 0 "" 0 0} { "Info" "IQEXE_START_BANNER_TIME" "Fri Oct 24 13:16:44 2008 " "Info: Processing started: Fri Oct 24 13:16:44 2008" {  } {  } 0 0 "Processing started: %1!s!" 0 0 "" 0 0}  } {  } 4 0 "Running %2!s! %1!s!" 0 0 "" 0 0}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off DS1307_LCD -c DS1307_LCD " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off DS1307_LCD -c DS1307_LCD" {  } {  } 0 0 "Command: %1!s!" 0 0 "" 0 0}
{ "Info" "IMPP_MPP_USER_DEVICE" "DS1307_LCD EP2C8Q208C8 " "Info: Selected device EP2C8Q208C8 for design \"DS1307_LCD\"" {  } {  } 0 0 "Selected device %2!s! for design \"%1!s!\"" 0 0 "" 0 0}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Info: Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" {  } {  } 0 0 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "" 0 0}
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock incremental compilation " "Warning: Feature LogicLock incremental compilation is not available with your current license" {  } {  } 0 0 "Feature %1!s! is not available with your current license" 0 0 "" 0 0}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C5Q208C8 " "Info: Device EP2C5Q208C8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0 0} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C5Q208I8 " "Info: Device EP2C5Q208I8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0 0} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C8Q208I8 " "Info: Device EP2C8Q208I8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0 0}  } {  } 2 0 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "" 0 0}
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "3 " "Info: Fitter converted 3 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ASDO~ 1 " "Info: Pin ~ASDO~ is reserved at location 1" {  } { { "d:/altera/80/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/80/quartus/bin/pin_planner.ppl" { ~ASDO~ } } } { "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~ASDO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0 0} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~nCSO~ 2 " "Info: Pin ~nCSO~ is reserved at location 2" {  } { { "d:/altera/80/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/80/quartus/bin/pin_planner.ppl" { ~nCSO~ } } } { "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~nCSO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0 0} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~LVDS54p/nCEO~ 108 " "Info: Pin ~LVDS54p/nCEO~ is reserved at location 108" {  } { { "d:/altera/80/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/80/quartus/bin/pin_planner.ppl" { ~LVDS54p/nCEO~ } } } { "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~LVDS54p/nCEO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0 0}  } {  } 0 0 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "" 0 0}
{ "Info" "ITDC_FITTER_TIMING_ENGINE" "Classic " "Info: Fitter is using the Classic Timing Analyzer" {  } {  } 0 0 "Fitter is using the %1!s! Timing Analyzer" 0 0 "" 0 0}
{ "Info" "ITAN_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Info: Timing requirements not specified -- quality metrics such as performance and power consumption may be sacrificed to reduce compilation time." {  } {  } 0 0 "Timing requirements not specified -- quality metrics such as performance and power consumption may be sacrificed to reduce compilation time." 0 0 "" 0 0}
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "clk (placed in PIN 23 (CLK0, LVDSCLK0p, Input)) " "Info: Automatically promoted node clk (placed in PIN 23 (CLK0, LVDSCLK0p, Input))" { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock CLKCTRL_G2 " "Info: Automatically promoted destinations to use location or clock signal Global Clock CLKCTRL_G2" {  } {  } 0 0 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0 "" 0 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS" "" "Info: Following destination nodes may be non-global or may not use global or regional clocks" { { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "lcd12864:inst\|div_cnt\[7\] " "Info: Destination node lcd12864:inst\|div_cnt\[7\]" {  } { { "source/lcd12864.v" "" { Text "E:/Mywork/EDA/Altera/FPGA/CYCII_VC33/DS1307_LCD/source/lcd12864.v" 18 -1 0 } } { "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "" { lcd12864:inst|div_cnt[7] } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0 "" 0 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "DS1307:inst2\|cnt_div\[22\] " "Info: Destination node DS1307:inst2\|cnt_div\[22\]" {  } { { "source/DS1307.vhd" "" { Text "E:/Mywork/EDA/Altera/FPGA/CYCII_VC33/DS1307_LCD/source/DS1307.vhd" 104 -1 0 } } { "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "" { DS1307:inst2|cnt_div[22] } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0 "" 0 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "DS1307:inst2\|rd_done " "Info: Destination node DS1307:inst2\|rd_done" {  } { { "source/DS1307.vhd" "" { Text "E:/Mywork/EDA/Altera/FPGA/CYCII_VC33/DS1307_LCD/source/DS1307.vhd" 54 -1 0 } } { "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "" { DS1307:inst2|rd_done } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0 "" 0 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "DS1307:inst2\|wr_done " "Info: Destination node DS1307:inst2\|wr_done" {  } { { "source/DS1307.vhd" "" { Text "E:/Mywork/EDA/Altera/FPGA/CYCII_VC33/DS1307_LCD/source/DS1307.vhd" 57 -1 0 } } { "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "" { DS1307:inst2|wr_done } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0 "" 0 0}  } {  } 0 0 "Following destination nodes may be non-global or may not use global or regional clocks" 0 0 "" 0 0}  } { { "d:/altera/80/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/80/quartus/bin/pin_planner.ppl" { clk } } } { "d:/altera/80/quartus/bin/Assignment Editor.qase" "" { Assignment "d:/altera/80/quartus/bin/Assignment Editor.qase" 1 { { 0 "clk" } } } } { "source/DS1307_LCD.bdf" "" { Schematic "E:/Mywork/EDA/Altera/FPGA/CYCII_VC33/DS1307_LCD/source/DS1307_LCD.bdf" { { 128 -88 80 144 "clk" "" } { 120 80 128 136 "clk" "" } } } } { "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "" { clk } "NODE_NAME" } }  } 0 0 "Automatically promoted node %1!s! %2!s!" 0 0 "" 0 0}