save2008-3-4_12-43-03.txt

基于MAX2运用Quartus实现串口通信

reset
reset: No such file or directory
# reboot


The system is going down NOW !!

Sending SIGTERM to all proces
Sending SIGKILL to all process錽.
Starting pid 17, console /dev/console: '/bin/umount'
umount: Cannot open /proc/mounts

Please stand by while rebooting


U-Boot 1.2.0 (Aug 29 2007 - 15:01:07)


DRAM:  64 MB

Flash: 512 kB

NAND:    64 MB

In:    serial

Out:   serial

Err:   serial

YANGCHU2410 # 

YANGCHU2410 # print

bootdelay=3

baudrate=115200

ethaddr=01:23:45:67:89:0a

netmask=255.255.255.0

bootargs=root=/dev/mtdblock2 ro init=/bin/sh console=ttyS0,115200 mem=64M

ipaddr=192.168.8.11

serverip=192.168.8.134

stdin=serial

stdout=serial

stderr=serial


Environment size: 234/65532 bytes

YANGCHU2410 # boot    tftp 30008000 uimage

TFTP from server 192.168.8.134; our IP address is 192.168.8.11

Filename 'uimage'.

Load address: 0x30008000

Loading: *#################################################################

	 #################################################################

	 #####################

done

Bytes transferred = 771672 (bc658 hex)

YANGCHU2410 # bootm 30008000

## Booting image at 30008000 ...

   Image Name:   wmmwang_linux2.4.18

   Created:      2007-08-28   0:52:23 UTC

   Image Type:   ARM Linux Kernel Image (uncompressed)

   Data Size:    771608 Bytes = 753.5 kB

   Load Address: 30008000

   Entry Point:  30008040

   Verifying Checksum ... OK

   XIP Kernel Image ... OK


Starting kernel ...



arch_number:c1 

boot_params:30000100

Uncompressing Linux....................................................... done, booting the kernel.

Linux version 2.4.18-rmk7-pxa1 ([e-mail]) (gcc version 2.95.3 20010315 (release)) #1 一 8月 27 21:43:09 CST 2007

CPU: ARM/CIRRUS Arm920Tsid(wb) revision 0

Machine: Samsung-SMDK2410

On node 0 totalpages: 16384

zone(0): 16384 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock2 ro init=/bin/sh console=ttyS0,115200 mem=64M

DEBUG: timer count 15626

Console: colour dummy device 80x30

Calibrating delay loop... 49.86 BogoMIPS

Memory: 64MB = 64MB total

Memory: 62620KB available (1376K code, 328K data, 140K init)

Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)

Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)

Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)

Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)

Page-cache hash table entries: 16384 (order: 4, 65536 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

CPU clock = 200.000 Mhz, HCLK = 100.000 Mhz, PCLK = 50.000 Mhz

Initializing S3C2410 buffer pool for DMA workaround

check your kernel config.

Starting kswapd

devfs: v1.10 (20020120) Richard Gooch ([e-mail])

devfs: boot_options: 0x1

ttyS%d0 at I/O 0x50000000 (irq = 52) is a S3C2410

ttyS%d1 at I/O 0x50004000 (irq = 55) is a S3C2410

ttyS%d2 at I/O 0x50008000 (irq = 58) is a S3C2410

Console: switching to colour frame buffer device 80x30

Installed S3C2410 frame buffer for TFT 640x480 LCD.

pty: 256 Unix98 ptys configured

S3C2410 Real Time Clock Driver v0.1

block: 128 slots per queue, batch=32

loop: loaded (max 8 devices)

DM9000 not found at 0xd0000300 id: 0xc9c9c9c9

Linux video capture interface: v1.00

SCSI subsystem driver Revision: 1.00

UDA1341 audio driver initialized

NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V)

NAND_ECC_NONE selected by board driver. This is not recommended !!

Creating 3 MTD partitions on "NAND 64MiB 3,3V":

0x00000000-0x00020000 : "boot"

0x00040000-0x00200000 : "kernel"

0x00200000-0x03ef8000 : "rootfs"

usb.c: registered new driver usbdevfs

usb.c: registered new driver hub

usb-ohci.c: USB OHCI at membase 0xe9000000, IRQ 26

usb.c: new USB bus registered, assigned bus number 1

hub.c: USB hub found

hub.c: 2 ports detected

usb.c: registered new driver hid

hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <[e-mail]>

hid-core.c: USB HID support drivers

Initializing USB Mass Storage driver...

usb.c: registered new driver usb-storage

USB Mass Storage support registered.

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 4096 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

Fast Floating Point Emulator V0.9 (c) Peter Teichmann.

VFS: Mounted root (cramfs filesystem) readonly.

Mounted devfs on /dev

Freeing init memory: 140K

console=/dev/con髈le

init started:  BusyBox v0.60.3 (2002.05.13-08:36+0000) multi-cal binary
Starting pid 11, console /dev/console: '/etc/init.d/rcS'

Bummer, could not run '/etc/init.d/rcS': No such file