lcdcont.qsf

运用Quartus在LCM中显示静态宫殿图形

# Copyright (C) 1991-2005 Altera Corporation
# Your use of Altera Corporation's design tools, logic functions 
# and other software and tools, and its AMPP partner logic       
# functions, and any output files any of the foregoing           
# (including device programming or simulation files), and any    
# associated documentation or information are expressly subject  
# to the terms and conditions of the Altera Program License      
# Subscription Agreement, Altera MegaCore Function License       
# Agreement, or other applicable license agreement, including,   
# without limitation, that your use is for the sole purpose of   
# programming logic devices manufactured by Altera and sold by   
# Altera or its authorized distributors.  Please refer to the    
# applicable agreement for further details.


# The default values for assignments are stored in the file
#		lcdcont_assignment_defaults.qdf
# If this file doesn't exist, and for assignments not listed, see file
#		assignment_defaults.qdf

# Altera recommends that you do not modify this file. This
# file is updated automatically by the Quartus II software
# and any changes you make may be lost or overwritten.


# Project-Wide Assignments
# ========================
set_global_assignment -name ORIGINAL_QUARTUS_VERSION "4.0 SP1"
set_global_assignment -name PROJECT_CREATION_TIME_DATE "16:41:57  JULY 29, 2004"
set_global_assignment -name LAST_QUARTUS_VERSION 5.0
set_global_assignment -name VHDL_FILE clockdiv.vhd
set_global_assignment -name VHDL_FILE lcdcont.vhd
set_global_assignment -name VECTOR_WAVEFORM_FILE lcdcont.vwf
set_global_assignment -name VHDL_FILE lcd0.vhd

# Pin & Location Assignments
# ==========================
set_location_assignment PIN_18 -to clk
set_location_assignment PIN_42 -to reset
set_location_assignment PIN_108 -to data_out[7]
set_location_assignment PIN_109 -to data_out[6]
set_location_assignment PIN_110 -to data_out[5]
set_location_assignment PIN_111 -to data_out[4]
set_location_assignment PIN_112 -to data_out[3]
set_location_assignment PIN_113 -to data_out[2]
set_location_assignment PIN_114 -to data_out[1]
set_location_assignment PIN_117 -to data_out[0]
set_location_assignment PIN_118 -to enable_out
set_location_assignment PIN_119 -to rw_out
set_location_assignment PIN_120 -to select_out
set_location_assignment PIN_96 -to cont

# Analysis & Synthesis Assignments
# ================================
set_global_assignment -name DEVICE_FILTER_PACKAGE TQFP
set_global_assignment -name DEVICE_FILTER_PIN_COUNT 144
set_global_assignment -name DEVICE_FILTER_SPEED_GRADE 5
set_global_assignment -name EDA_DESIGN_ENTRY_SYNTHESIS_TOOL "<None>"
set_global_assignment -name FAMILY "MAX II"
set_global_assignment -name TOP_LEVEL_ENTITY lcdcont

# Fitter Assignments
# ==================
set_global_assignment -name DEVICE EPM1270T144C5ES

# Simulator Assignments
# =====================
set_global_assignment -name SIMULATION_MODE TIMING
set_global_assignment -name ADD_DEFAULT_PINS_TO_SIMULATION_OUTPUT_WAVEFORMS OFF
set_global_assignment -name GLITCH_INTERVAL "1 ns"
set_global_assignment -name VECTOR_INPUT_SOURCE lcdcont.vwf

# LogicLock Region Assignments
# ============================
set_global_assignment -name LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT OFF

# ---------------------
# start ENTITY(lcdcont)


	# -------------------------------------
	# start LOGICLOCK_REGION("Root Region")

		# LogicLock Region Assignments
		# ============================
		set_global_assignment -name LL_ROOT_REGION ON -section_id "Root Region"
		set_global_assignment -name LL_MEMBER_STATE LOCKED -section_id "Root Region"

	# end LOGICLOCK_REGION("Root Region")
	# -----------------------------------

# end ENTITY(lcdcont)
# -------------------