clock_clock.fit

使用EPM7128设计的数字钟

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 05/03/2005 21:18:26      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "clock_clock"
BEGIN

    DEVICE = "EPM7064SLC84-5";

    "C1Hz"                         : INPUT_PIN  = 22     ; -- LC1
    "C512Hz"                       : INPUT_PIN  = 15     ; -- LC7
    "C1024Hz"                      : INPUT_PIN  = 12     ; -- LC9
    "SEL_CORR"                     : INPUT_PIN  = 21     ; -- LC2
    "SEL_H"                        : INPUT_PIN  = 20     ; -- LC3
    "SEL_M"                        : INPUT_PIN  = 18     ; -- LC4
    "SEL_S"                        : INPUT_PIN  = 17     ; -- LC5
    "UP"                           : INPUT_PIN  = 16     ; -- LC6
    "H0"                           : OUTPUT_PIN = 49     ; -- LC37
    "H1"                           : OUTPUT_PIN = 52     ; -- LC40
    "H2"                           : OUTPUT_PIN = 45     ; -- LC34
    "H3"                           : OUTPUT_PIN = 48     ; -- LC36
    "H100"                         : OUTPUT_PIN = 46     ; -- LC35
    "H101"                         : OUTPUT_PIN = 50     ; -- LC38
    "H102"                         : OUTPUT_PIN = 75     ; -- LC59
    "H103"                         : OUTPUT_PIN = 54     ; -- LC41
    "M0"                           : OUTPUT_PIN = 44     ; -- LC33
    "M1"                           : OUTPUT_PIN = 70     ; -- LC55
    "M2"                           : OUTPUT_PIN = 69     ; -- LC54
    "M3"                           : OUTPUT_PIN = 68     ; -- LC53
    "M100"                         : OUTPUT_PIN = 67     ; -- LC52
    "M101"                         : OUTPUT_PIN = 65     ; -- LC51
    "M102"                         : OUTPUT_PIN = 64     ; -- LC50
    "M103"                         : OUTPUT_PIN = 55     ; -- LC42
    "RING_ZD"                      : OUTPUT_PIN = 76     ; -- LC60
    "S0"                           : OUTPUT_PIN = 51     ; -- LC39
    "S1"                           : OUTPUT_PIN = 74     ; -- LC58
    "S2"                           : OUTPUT_PIN = 81     ; -- LC64
    "S3"                           : OUTPUT_PIN = 79     ; -- LC62
    "S100"                         : OUTPUT_PIN = 77     ; -- LC61
    "S101"                         : OUTPUT_PIN = 73     ; -- LC57
    "S102"                         : OUTPUT_PIN = 63     ; -- LC49
    "S103"                         : OUTPUT_PIN = 56     ; -- LC43

END;

INTERNAL_INFO "clock_clock"
BEGIN
	DEVICE = EPM7064SLC84-5;
	LC60    : LORAX = "G81R0";
	LC41    : LORAX = "G107R0";
	LC59    : LORAX = "G80R0";
	LC38    : LORAX = "G26R0,PA1R0C2";
	LC35    : LORAX = "G60R0,PA12R0C2";
	LC36    : LORAX = "G61R0,PA9R0C2";
	LC34    : LORAX = "G59R0,PA10R0C2";
	LC40    : LORAX = "G28R0,PA0R0C2";
	LC37    : LORAX = "G25R0,PA2R0C2";
	LC42    : LORAX = "G108R0";
	LC50    : LORAX = "G30R0,PA5R0C3,PA5R0C2";
	LC51    : LORAX = "G31R0,PA4R0C3";
	LC52    : LORAX = "G32R0,PA1R0C3";
	LC53    : LORAX = "G62R0,PA16R0C3";
	LC54    : LORAX = "G63R0,PA14R0C3";
	LC55    : LORAX = "G64R0,PA12R0C3";
	LC33    : LORAX = "G58R0,PA11R0C3";
	LC43    : LORAX = "G109R0";
	LC49    : LORAX = "G29R0,PA7R0C2,PA7R0C3";
	LC57    : LORAX = "G78R0,PA24R0C3";
	LC61    : LORAX = "G111R0,PA33R0C3";
	LC62    : LORAX = "G112R0,PA35R0C3";
	LC64    : LORAX = "G114R0,PA31R0C3";
	LC58    : LORAX = "G79R0,PA21R0C3";
	LC39    : LORAX = "G27R0,PA3R0C3";
	OH8R0P12 : LORAX = "G0R0,PA0R0C3";
	OH6R0P15 : LORAX = "G118R0,PA30R0C3";
	OH1R0P21 : LORAX = "G84R0,PA20R0C2";
	OH2R0P20 : LORAX = "G85R0,PA21R0C2";
	OH5R0P16 : LORAX = "G117R0,PA29R0C2";
	OH3R0P18 : LORAX = "G86R0,PA22R0C2";
	OH0R0P22 : LORAX = "G83R0,PA18R0C2";
	OH4R0P17 : LORAX = "G116R0,PA27R0C2";
END;