clock_ring.fit

使用EPM7128设计的数字钟

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 05/03/2005 21:24:15      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "clock_ring"
BEGIN

    DEVICE = "EPM7032SLC44-5";

    "SEL_H"                        : INPUT_PIN  = 31     ; -- LC26
    "SEL_M"                        : INPUT_PIN  = 39     ; -- LC19
    "SEL_RING"                     : INPUT_PIN  = 43     ;
    "SEL_S"                        : INPUT_PIN  = 8      ; -- LC5
    "UP"                           : INPUT_PIN  = 9      ; -- LC6
    "H0"                           : OUTPUT_PIN = 37     ; -- LC21
    "H1"                           : OUTPUT_PIN = 36     ; -- LC22
    "H2"                           : OUTPUT_PIN = 34     ; -- LC23
    "H3"                           : OUTPUT_PIN = 33     ; -- LC24
    "H100"                         : OUTPUT_PIN = 29     ; -- LC27
    "H101"                         : OUTPUT_PIN = 28     ; -- LC28
    "H102"                         : OUTPUT_PIN = 26     ; -- LC30
    "H103"                         : OUTPUT_PIN = 24     ; -- LC32
    "M0"                           : OUTPUT_PIN = 27     ; -- LC29
    "M1"                           : OUTPUT_PIN = 6      ; -- LC3
    "M2"                           : OUTPUT_PIN = 5      ; -- LC2
    "M3"                           : OUTPUT_PIN = 4      ; -- LC1
    "M100"                         : OUTPUT_PIN = 16     ; -- LC11
    "M101"                         : OUTPUT_PIN = 12     ; -- LC8
    "M102"                         : OUTPUT_PIN = 11     ; -- LC7
    "M103"                         : OUTPUT_PIN = 25     ; -- LC31
    "S0"                           : OUTPUT_PIN = 41     ; -- LC17
    "S1"                           : OUTPUT_PIN = 17     ; -- LC12
    "S2"                           : OUTPUT_PIN = 19     ; -- LC14
    "S3"                           : OUTPUT_PIN = 20     ; -- LC15
    "S100"                         : OUTPUT_PIN = 21     ; -- LC16
    "S101"                         : OUTPUT_PIN = 14     ; -- LC10
    "S102"                         : OUTPUT_PIN = 18     ; -- LC13
    "S103"                         : OUTPUT_PIN = 40     ; -- LC18

END;

INTERNAL_INFO "clock_ring"
BEGIN
	DEVICE = EPM7032SLC44-5;
	LC32    : LORAX = "G58R0";
	LC30    : LORAX = "G56R0";
	LC28    : LORAX = "G41R0,PA20R0C1";
	LC27    : LORAX = "G40R0,PA19R0C1";
	LC24    : LORAX = "G33R0,PA10R0C1";
	LC23    : LORAX = "G32R0,PA13R0C1";
	LC22    : LORAX = "G31R0,PA15R0C1";
	LC21    : LORAX = "G30R0,PA17R0C1";
	LC31    : LORAX = "G57R0";
	LC7     : LORAX = "G28R0,PA12R0C0";
	LC8     : LORAX = "G29R0,PA9R0C0";
	LC11    : LORAX = "G36R0,PA24R0C0";
	LC1     : LORAX = "G9R0,PA2R0C0";
	LC2     : LORAX = "G10R0,PA1R0C0";
	LC3     : LORAX = "G11R0,PA3R0C0";
	LC29    : LORAX = "G55R0,PA27R0C0";
	LC15    : LORAX = "G53R0,PA33R0C0";
	LC14    : LORAX = "G52R0,PA31R0C0";
	LC12    : LORAX = "G37R0,PA26R0C0";
	LC17    : LORAX = "G13R0,PA7R0C0";
	LC18    : LORAX = "G14R0";
	LC13    : LORAX = "G51R0,PA28R0C0";
	LC10    : LORAX = "G35R0,PA21R0C0";
	LC16    : LORAX = "G54R0,PA34R0C0";
	OH32R0P43 : LORAX = "G59R0,PA27R0C1";
	OH5R0P9 : LORAX = "G61R0,PA28R0C1";
	OH25R0P31 : LORAX = "G5R0,PA4R0C1";
	OH18R0P39 : LORAX = "G49R0,PA23R0C1";
	OH4R0P8 : LORAX = "G60R0,PA29R0C1";
END;