cnt24.fit

以前学习VHDL语言时做的一个电子闹钟程序

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 04/15/2008 20:12:18      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "cnt24"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 1      ;
    "rst"                          : INPUT_PIN  = 2      ;
    "co"                           : OUTPUT_PIN = 73     ;
    "qout0"                        : OUTPUT_PIN = 16     ;
    "qout1"                        : OUTPUT_PIN = 19     ;
    "qout2"                        : OUTPUT_PIN = 18     ;
    "qout3"                        : OUTPUT_PIN = 17     ;
    "qout4"                        : OUTPUT_PIN = 71     ;
    "qout5"                        : OUTPUT_PIN = 72     ;
    "qout6"                        : OUTPUT_PIN = 69     ;
    "qout7"                        : OUTPUT_PIN = 70     ;
    "|LPM_ADD_SUB:140|addcore:adder|:55" : LOCATION   = LC6_A22;
    "|LPM_ADD_SUB:140|addcore:adder|:59" : LOCATION   = LC7_A22;
    "|LPM_ADD_SUB:208|addcore:adder|:55" : LOCATION   = LC2_A9 ;
    ":3"                           : LOCATION   = LC1_A22;
    ":13"                          : LOCATION   = LC3_A9 ;  -- ql3
    ":14"                          : LOCATION   = LC5_A9 ;  -- ql2
    ":15"                          : LOCATION   = LC7_A9 ;  -- ql1
    ":16"                          : LOCATION   = LC1_A9 ;  -- ql0
    ":17"                          : LOCATION   = LC5_A22;  -- qh3
    ":18"                          : LOCATION   = LC8_A22;  -- qh2
    ":19"                          : LOCATION   = LC2_A22;  -- qh1
    ":20"                          : LOCATION   = LC4_A22;  -- qh0
    ":95"                          : LOCATION   = LC4_A9 ;
    ":113"                         : LOCATION   = LC3_A22;

END;

INTERNAL_INFO "cnt24"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC1_A22,->LC3_A9,->LC5_A9,->LC7_A9,->LC1_A9,->LC5_A22,->LC8_A22,->LC2_A22,->LC4_A22|";
    OD1P2   : LORAX = "1:FB1->LC1_A22,->LC3_A9,->LC5_A9,->LC7_A9,->LC1_A9,->LC5_A22,->LC8_A22,->LC2_A22,->LC4_A22|";
    LC1_A22 : LORAX = "1:MSW0R0C21,HHR19R0->OH0R0P73|";
    LC3_A9  : LORAX = "1:MSW2R0C8,HHL1R0->OH10R0P17|";
    LC5_A9  : LORAX = "1:MSW4R0C8,HHL43R0->OH12R0P18|";
    LC7_A9  : LORAX = "1:MSW6R0C8,HHL40R0->OH14R0P19|";
    LC1_A9  : LORAX = "1:MSW0R0C8,HHL21R0->OH8R0P16|";
    LC5_A22 : LORAX = "1:MSW4R0C21,G54R0->OH4R0P70|";
    LC8_A22 : LORAX = "1:MSW7R0C21,G65R0->OH7R0P69|";
    LC2_A22 : LORAX = "1:MSW2R0C20,HHR1R0->OH2R0P72|";
    LC4_A22 : LORAX = "1:MSW3R0C21,HHR17R0->OH3R0P71|";
    LC4_A9  : LORAX = "1:MSW3R0C9,G33R0,PA21R0C21->LC1_A22,->LC5_A22,->LC8_A22,->LC2_A22,->LC4_A22|";
	LC6_A22 : LORAX2 = "X, X, LC2_A22, LC4_A22";
	LC7_A22 : LORAX2 = "X, LC8_A22, LC2_A22, LC4_A22";
	LC2_A9  : LORAX2 = "X, X, LC7_A9, LC1_A9";
	LC1_A22 : LORAX2 = "X, LC1_A22, LC3_A22, LC4_A9";
	LC3_A9  : LORAX2 = "LC3_A9, LC5_A9, LC4_A9, LC2_A9";
	LC5_A9  : LORAX2 = "X, LC5_A9, LC4_A9, LC2_A9";
	LC7_A9  : LORAX2 = "X, LC7_A9, LC1_A9, LC4_A9";
	LC1_A9  : LORAX2 = "X, X, X, LC1_A9";
	LC5_A22 : LORAX2 = "LC5_A22, LC3_A22, LC7_A22, LC4_A9";
	LC8_A22 : LORAX2 = "LC8_A22, LC6_A22, LC3_A22, LC4_A9";
	LC2_A22 : LORAX2 = "LC2_A22, LC3_A22, LC4_A22, LC4_A9";
	LC4_A22 : LORAX2 = "X, LC3_A22, LC4_A22, LC4_A9";
	LC4_A9  : LORAX2 = "X, LC3_A9, LC5_A9, LC2_A9";
	LC3_A22 : LORAX2 = "LC5_A22, LC2_A22, LC8_A22, LC4_A22";
END;