cnt60.fit

以前学习VHDL语言时做的一个电子闹钟程序

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 04/16/2008 21:20:52      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "cnt60"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 1      ;
    "rst"                          : INPUT_PIN  = 2      ;
    "co"                           : OUTPUT_PIN = 21     ;
    "qout0"                        : OUTPUT_PIN = 23     ;
    "qout1"                        : OUTPUT_PIN = 67     ;
    "qout2"                        : OUTPUT_PIN = 24     ;
    "qout3"                        : OUTPUT_PIN = 65     ;
    "qout4"                        : OUTPUT_PIN = 25     ;
    "qout5"                        : OUTPUT_PIN = 66     ;
    "qout6"                        : OUTPUT_PIN = 64     ;
    "qout7"                        : OUTPUT_PIN = 22     ;
    "|LPM_ADD_SUB:140|addcore:adder|:59" : LOCATION   = LC3_B4 ;
    "|LPM_ADD_SUB:140|addcore:adder|:68" : LOCATION   = LC2_B4 ;
    ":3"                           : LOCATION   = LC4_B4 ;
    ":13"                          : LOCATION   = LC5_B7 ;  -- ql3
    ":14"                          : LOCATION   = LC6_B7 ;  -- ql2
    ":15"                          : LOCATION   = LC1_B7 ;  -- ql1
    ":16"                          : LOCATION   = LC4_B7 ;  -- ql0
    ":17"                          : LOCATION   = LC1_B4 ;  -- qh3
    ":18"                          : LOCATION   = LC6_B4 ;  -- qh2
    ":19"                          : LOCATION   = LC3_B7 ;  -- qh1
    ":20"                          : LOCATION   = LC8_B7 ;  -- qh0
    ":95"                          : LOCATION   = LC7_B7 ;
    ":113"                         : LOCATION   = LC2_B7 ;

END;

INTERNAL_INFO "cnt60"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC4_B4,->LC5_B7,->LC6_B7,->LC1_B7,->LC4_B7,->LC1_B4,->LC6_B4,->LC3_B7,->LC8_B7|";
    OD1P2   : LORAX = "1:FB1->LC4_B4,->LC5_B7,->LC6_B7,->LC1_B7,->LC4_B7,->LC1_B4,->LC6_B4,->LC3_B7,->LC8_B7|";
    LC4_B4  : LORAX = "1:MSW0R1C2,HHL21R1->OH8R1P21|";
    LC5_B7  : LORAX = "1:MSW4R1C7,G59R1->OH4R1P65|";
    LC6_B7  : LORAX = "1:MSW5R1C7,HHL28R1->OH13R1P24|";
    LC1_B7  : LORAX = "1:MSW0R1C6,G45R1->OH0R1P67|";
    LC4_B7  : LORAX = "1:MSW3R1C6,G0R1->OH11R1P23|";
    LC1_B4  : LORAX = "1:MSW1R1C2,HHL2R1->OH9R1P22|2:PA20R1C6->LC2_B7||";
    LC6_B4  : LORAX = "1:MSW6R1C2|2:G87R1->OH6R1P64|,2:HHL40R1,PA9R1C6->LC2_B7||";
    LC3_B7  : LORAX = "1:MSW2R1C7|2:G3R1->OH2R1P66|,2:HHL4R1,PA18R1C3->LC3_B4,->LC2_B4||";
    LC8_B7  : LORAX = "1:MSW7R1C6,HHL46R1->OH15R1P25|2:PA3R1C3->LC3_B4,->LC2_B4||";
    LC7_B7  : LORAX = "1:MSW6R1C6,HHL29R1,PA6R1C3->LC4_B4,->LC1_B4,->LC6_B4|";
    LC2_B7  : LORAX = "1:MSW1R1C6,HHL8R1,PA14R1C3->LC4_B4,->LC1_B4,->LC6_B4|";
	LC3_B4  : LORAX2 = "X, LC6_B4, LC8_B7, LC3_B7";
	LC2_B4  : LORAX2 = "X, LC6_B4, LC8_B7, LC3_B7";
	LC4_B4  : LORAX2 = "X, LC4_B4, LC2_B7, LC7_B7";
	LC5_B7  : LORAX2 = "LC5_B7, LC6_B7, LC1_B7, LC4_B7";
	LC6_B7  : LORAX2 = "LC6_B7, LC1_B7, LC7_B7, LC4_B7";
	LC1_B7  : LORAX2 = "X, LC1_B7, LC4_B7, LC7_B7";
	LC4_B7  : LORAX2 = "X, X, X, LC4_B7";
	LC1_B4  : LORAX2 = "LC1_B4, LC3_B4, LC2_B7, LC7_B7";
	LC6_B4  : LORAX2 = "LC6_B4, LC2_B4, LC2_B7, LC7_B7";
	LC3_B7  : LORAX2 = "LC3_B7, LC2_B7, LC8_B7, LC7_B7";
	LC8_B7  : LORAX2 = "X, X, LC8_B7, LC7_B7";
	LC7_B7  : LORAX2 = "LC5_B7, LC6_B7, LC1_B7, LC4_B7";
	LC2_B7  : LORAX2 = "LC1_B4, LC8_B7, LC6_B4, LC3_B7";
END;