i8051_lib.mpf

8051的vhdl源代码

; Turn on/off undebuggable SystemC type warnings. Default is on.
; ShowUndebuggableScTypeWarning = 0

; Turn on/off unassociated SystemC name warnings. Default is off.
; ShowUnassociatedScNameWarning = 1

; Set SystemC default time unit.
; Set to fs, ps, ns, us, ms, or sec with optional 
; prefix of 1, 10, or 100.  The default is 1 ns.
; The ScTimeUnit value is honored if it is coarser than Resolution.
; If ScTimeUnit is finer than Resolution, it is set to the value
; of Resolution. For example, if Resolution is 100ps and ScTimeUnit is ns,
; then the default time unit will be 1 ns.  However if Resolution 
; is 10 ns and ScTimeUnit is ns, then the default time unit will be 10 ns.
ScTimeUnit = ns

; Set the SCV relationship name that will be used to identify phase
; relations.  If the name given to a transactor relation matches this
; name, the transactions involved will be treated as phase transactions
ScvPhaseRelationName = mti_phase


; Do not exit when executing sc_stop().
; If this is enabled, the control will be returned to the user before exiting
; the simulation. This can make some cleanup tasks easier before kernel exits.
; The default is off.
; NoExitOnScStop = 1

; Run simulator in assertion debug mode. Default is off.
; AssertionDebug = 1

; Turn on/off PSL/SVA concurrent assertion pass enable. Default is on.
; AssertionPassEnable = 0 

; Turn on/off PSL/SVA concurrent assertion fail enable. Default is on.
; AssertionFailEnable = 0

; Set PSL/SVA concurrent assertion pass limit. Default is -1.
; Any positive integer, -1 for infinity.
; AssertionPassLimit = 1

; Set PSL/SVA concurrent assertion fail limit. Default is -1.
; Any positive integer, -1 for infinity.
; AssertionFailLimit = 1

; Turn on/off PSL concurrent assertion pass log. Default is off.
; The flag does not affect SVA
; AssertionPassLog = 1

; Turn on/off PSL concurrent assertion fail log. Default is on.
; The flag does not affect SVA
; AssertionFailLog = 0

; Set action type for PSL/SVA concurrent assertion fail action. Default is continue.
; 0 = Continue  1 = Break  2 = Exit
; AssertionFailAction = 1

; Turn on/off code coverage
; CodeCoverage = 0

; Count all code coverage condition and expression truth table rows that match.
; CoverCountAll = 1

; Turn on/off all PSL/SVA cover directive enables.  Default is on.
; CoverEnable = 0

; Turn on/off PSL/SVA cover log.  Default is off.
; CoverLog = 1

; Set "at_least" value for all PSL/SVA cover directives.  Default is 1.
; CoverAtLeast = 2

; Set "limit" value for all PSL/SVA cover directives.  Default is -1.
; Any positive integer, -1 for infinity.
; CoverLimit = 1

; Specify the coverage database filename.  Default is "" (i.e. database is NOT automatically saved on close). 
; UCDBFilename = vsim.ucdb

; Set weight for all PSL/SVA cover directives.  Default is 1.
; CoverWeight = 2

; Check vsim plusargs.  Default is 0 (off).
; 0 = Don't check plusargs
; 1 = Warning on unrecognized plusarg
; 2 = Error and exit on unrecognized plusarg
; CheckPlusargs = 1

; Load the specified shared objects with the RTLD_GLOBAL flag.
; This gives global visibility to all symbols in the shared objects,
; meaning that subsequently loaded shared objects can bind to symbols
; in the global shared objects.  The list of shared objects should
; be whitespace delimited.  This option is not supported on the
; Windows or AIX platforms.
; GlobalSharedObjectList = example1.so example2.so example3.so

; Run the 0in tools from within the simulator. 
; Default value set to 0. Please set it to 1 to invoke 0in.
; VsimZeroIn = 1

; Set the options to be passed to the 0in tools.
; Default value set to "". Please set it to appropriate options needed.
; VsimZeroInOptions = ""

; Initial seed for the Random Number Generator (RNG) of the root thread (SystemVerilog).
; Sv_Seed = 0

; Maximum size of dynamic arrays that are resized during randomize().
; The default is 1000. A value of 0 indicates no limit.
; SolveArrayResizeMax = 1000

; Error message severity when randomize() failure is detected (SystemVerilog).
; The default is 0 (no error).
; 0 = No error  1 = Warning  2 = Error  3 = Failure  4 = Fatal
; SolveFailSeverity = 0

; Enable/disable debug information for randomize() failures (SystemVerilog).
; The default is 0 (disabled). Set to 1 to enable.
; SolveFailDebug = 0

; When SolveFailDebug is enabled, this value specifies the maximum number of
; constraint subsets that will be tested for conflicts.
; The default is 0 (no limit).
; SolveFailDebugLimit = 0

; When SolveFailDebug is eanbled, this value specifies the maximum size of
; constraint subsets that will be tested for conflicts.
; The default value is 0 (no limit).
; SolveFailDebugMaxSet = 0

; Specify random sequence compatiblity with a prior letter release. This 
; option is used to get the same random sequences during simulation as
; as a prior letter release. Only prior letter releases (of the current
; number release) are allowed.
; Note: To achieve the same random sequences, solver optimizations and/or
; bug fixes introduced since the specified release may be disabled - 
; yielding the performance / behavior of the prior release.
; Default value set to "" (random compatibility not required).
; SolveRev = ""

; Environment variable expansion of command line arguments has been depricated 
; in favor shell level expansion.  Universal environment variable expansion 
; inside -f files is support and continued support for MGC Location Maps provide
; alternative methods for handling flexible pathnames.
; The following line may be uncommented and the value set to 1 to re-enable this 
; deprecated behavior.  The default value is 0.
; DeprecatedEnvironmentVariableExpansion = 0

; Retroactive Recording uses a limited number of private data channels in the WLF
; file.  Too many channels degrade WLF performance.  If the limit is reached, 
; simulation ends with a fatal error.  You may change this limit as needed, but be
; aware of the implications of too many channels.  The value must be an integer
; greater than or equal to zero, where zero disables all retroactive recording.
; RetroChannelLimit = 20

; Options to give vopt when code coverage is turned on.
; Default is "+acc=lprnb -opt=-merge -opt=-suppressAlways"
; VoptCoverageOptions = +acc=lprnb -opt=-merge -opt=-suppressAlways

[lmc]
; The simulator's interface to Logic Modeling's SmartModel SWIFT software
libsm = $MODEL_TECH/libsm.sl
; The simulator's interface to Logic Modeling's SmartModel SWIFT software (Windows NT)
; libsm = $MODEL_TECH/libsm.dll
;  Logic Modeling's SmartModel SWIFT software (HP 9000 Series 700)
; libswift = $LMC_HOME/lib/hp700.lib/libswift.sl
;  Logic Modeling's SmartModel SWIFT software (IBM RISC System/6000)
; libswift = $LMC_HOME/lib/ibmrs.lib/swift.o
;  Logic Modeling's SmartModel SWIFT software (Sun4 Solaris)
; libswift = $LMC_HOME/lib/sun4Solaris.lib/libswift.so
;  Logic Modeling's SmartModel SWIFT software (Windows NT)
; libswift = $LMC_HOME/lib/pcnt.lib/libswift.dll
;  Logic Modeling's SmartModel SWIFT software (Linux)
; libswift = $LMC_HOME/lib/x86_linux.lib/libswift.so

; The simulator's interface to Logic Modeling's hardware modeler SFI software
libhm = $MODEL_TECH/libhm.sl
; The simulator's interface to Logic Modeling's hardware modeler SFI software (Windows NT)
; libhm = $MODEL_TECH/libhm.dll
;  Logic Modeling's hardware modeler SFI software (HP 9000 Series 700)
; libsfi = <sfi_dir>/lib/hp700/libsfi.sl
;  Logic Modeling's hardware modeler SFI software (IBM RISC System/6000)
; libsfi = <sfi_dir>/lib/rs6000/libsfi.a
;  Logic Modeling's hardware modeler SFI software (Sun4 Solaris)
; libsfi = <sfi_dir>/lib/sun4.solaris/libsfi.so
;  Logic Modeling's hardware modeler SFI software (Windows NT)
; libsfi = <sfi_dir>/lib/pcnt/lm_sfi.dll
;  Logic Modeling's hardware modeler SFI software (Linux)
; libsfi = <sfi_dir>/lib/linux/libsfi.so

[msg_system]
; Change a message severity or suppress a message.
; The format is: <msg directive> = <msg number>[,<msg number>...]
; Examples:
;   note = 3009
;   warning = 3033
;   error = 3010,3016
;   fatal = 3016,3033
;   suppress = 3009,3016,3043
; The command verror <msg number> can be used to get the complete
; description of a message.

; Control transcripting of elaboration/runtime messages.
; The default is to have messages appear in the transcript and 
; recorded in the wlf file (messages that are recorded in the
; wlf file can be viewed in the MsgViewer).  The other settings
; are to send messages only to the transcript or only to the 
; wlf file.  The valid values are
;    both  {default}
;    tran  {transcript only}
;    wlf   {wlf file only}
; msgmode = both
[Project]
Project_Version = 6
Project_DefaultLib = work
Project_SortMethod = unused
Project_Files_Count = 11
Project_File_0 = i8051_all_tb.vhd
Project_File_P_0 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 0 vhdl_disableopt 0 vhdl_vital 0 vhdl_warn1 1 vhdl_vopt 1 vhdl_showsource 0 vhdl_warn2 1 vhdl_explicit 1 vhdl_0InOptions {} vhdl_warn3 1 vhdl_options {} vhdl_warn4 1 ood 1 vhdl_warn5 1 compile_to work compile_order 10 dont_compile 0 cover_nosub 0 vhdl_use93 2002
Project_File_1 = D:/8051/i8051_ram.vhd
Project_File_P_1 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 1212630548 vhdl_disableopt 0 vhdl_vital 0 vhdl_warn1 1 vhdl_vopt 1 vhdl_showsource 0 vhdl_warn2 1 vhdl_explicit 1 vhdl_0InOptions {} vhdl_warn3 1 vhdl_options {} vhdl_warn4 1 ood 0 vhdl_warn5 1 compile_to work compile_order 6 dont_compile 0 cover_nosub 0 vhdl_use93 2002
Project_File_2 = D:/8051/i8051_dec.vhd
Project_File_P_2 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 1212630536 vhdl_disableopt 0 vhdl_vital 0 vhdl_warn1 1 vhdl_vopt 1 vhdl_showsource 0 vhdl_warn2 1 vhdl_explicit 1 vhdl_0InOptions {} vhdl_warn3 1 vhdl_options {} vhdl_warn4 1 ood 0 vhdl_warn5 1 compile_to work compile_order 5 dont_compile 0 cover_nosub 0 vhdl_use93 2002
Project_File_3 = D:/8051/i8051_tsb.vhd
Project_File_P_3 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 1212630634 vhdl_disableopt 0 vhdl_vital 0 vhdl_warn1 1 vhdl_vopt 1 vhdl_showsource 0 vhdl_warn2 1 vhdl_explicit 1 vhdl_0InOptions {} vhdl_warn3 1 vhdl_options {} vhdl_warn4 1 ood 0 vhdl_warn5 1 compile_to work compile_order 8 dont_compile 0 cover_nosub 0 vhdl_use93 2002
Project_File_4 = D:/8051/i8051_dbg.vhd
Project_File_P_4 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 1212739182 vhdl_disableopt 0 vhdl_vital 0 vhdl_vopt 1 vhdl_warn1 1 vhdl_explicit 1 vhdl_warn2 1 vhdl_showsource 0 vhdl_warn3 1 vhdl_0InOptions {} vhdl_warn4 1 vhdl_options {} vhdl_warn5 1 ood 0 compile_to work compile_order 4 cover_nosub 0 dont_compile 0 vhdl_use93 2002
Project_File_5 = D:/8051/i8051_ctr.vhd
Project_File_P_5 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 1212658172 vhdl_disableopt 0 vhdl_vital 0 vhdl_warn1 1 vhdl_vopt 1 vhdl_showsource 0 vhdl_warn2 1 vhdl_explicit 1 vhdl_0InOptions {} vhdl_warn3 1 vhdl_options {} vhdl_warn4 1 ood 0 vhdl_warn5 1 compile_to work compile_order 3 dont_compile 0 cover_nosub 0 vhdl_use93 2002
Project_File_6 = D:/8051/i8051_all.vhd
Project_File_P_6 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 1212739656 vhdl_disableopt 0 vhdl_vital 0 vhdl_warn1 1 vhdl_vopt 1 vhdl_showsource 0 vhdl_warn2 1 vhdl_explicit 1 vhdl_0InOptions {} vhdl_warn3 1 vhdl_options {} vhdl_warn4 1 ood 1 vhdl_warn5 1 compile_to work compile_order 1 dont_compile 0 cover_nosub 0 vhdl_use93 2002
Project_File_7 = D:/8051/my_lib/i8051_lib.vhd
Project_File_P_7 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 1212713416 vhdl_disableopt 0 vhdl_vital 0 vhdl_vopt 1 vhdl_warn1 1 vhdl_explicit 1 vhdl_warn2 1 vhdl_showsource 0 vhdl_warn3 1 vhdl_0InOptions {} vhdl_warn4 1 vhdl_options {} vhdl_warn5 1 ood 0 compile_to work compile_order 9 cover_nosub 0 dont_compile 0 vhdl_use93 2002
Project_File_8 = D:/8051/i8051_rom.vhd
Project_File_P_8 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 1212630580 vhdl_disableopt 0 vhdl_vital 0 vhdl_warn1 1 vhdl_vopt 1 vhdl_showsource 0 vhdl_warn2 1 vhdl_explicit 1 vhdl_0InOptions {} vhdl_warn3 1 vhdl_options {} vhdl_warn4 1 ood 0 vhdl_warn5 1 compile_to work compile_order 7 dont_compile 0 cover_nosub 0 vhdl_use93 2002
Project_File_9 = D:/8051/i8051_alu.vhd
Project_File_P_9 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 1212712260 vhdl_disableopt 0 vhdl_vital 0 vhdl_warn1 1 vhdl_vopt 1 vhdl_showsource 0 vhdl_warn2 1 vhdl_explicit 1 vhdl_0InOptions {} vhdl_warn3 1 vhdl_options {} vhdl_warn4 1 ood 0 vhdl_warn5 1 compile_to work compile_order 2 dont_compile 0 cover_nosub 0 vhdl_use93 2002
Project_File_10 = D:/8051/i8051_xrm.vhd
Project_File_P_10 = vhdl_novitalcheck 0 file_type vhdl group_id 0 vhdl_nodebug 0 vhdl_1164 1 vhdl_noload 0 vhdl_synth 0 vhdl_enable0In 0 folder {Top Level} last_compile 1212630628 vhdl_disableopt 0 vhdl_vital 0 vhdl_warn1 1 vhdl_vopt 1 vhdl_showsource 0 vhdl_warn2 1 vhdl_explicit 1 vhdl_0InOptions {} vhdl_warn3 1 vhdl_options {} vhdl_warn4 1 ood 0 vhdl_warn5 1 compile_to work compile_order 0 dont_compile 0 cover_nosub 0 vhdl_use93 2002
Project_Sim_Count = 0
Project_Folder_Count = 0
Echo_Compile_Output = 0
Save_Compile_Report = 1
Project_Opt_Count = 0
ForceSoftPaths = 0
ReOpenSourceFiles = 1
VERILOG_DoubleClick = Edit
VERILOG_CustomDoubleClick = 
VHDL_DoubleClick = Edit
VHDL_CustomDoubleClick = 
PSL_DoubleClick = Edit
PSL_CustomDoubleClick = 
TEXT_DoubleClick = Edit
TEXT_CustomDoubleClick = 
SYSTEMC_DoubleClick = Edit
SYSTEMC_CustomDoubleClick = 
TCL_DoubleClick = Edit
TCL_CustomDoubleClick = 
MACRO_DoubleClick = Edit
MACRO_CustomDoubleClick = 
VCD_DoubleClick = Edit
VCD_CustomDoubleClick = 
SDF_DoubleClick = Edit
SDF_CustomDoubleClick = 
XML_DoubleClick = Edit
XML_CustomDoubleClick = 
LOGFILE_DoubleClick = Edit
LOGFILE_CustomDoubleClick = 
EditorState = {tabbed horizontal 1} {D:/8051/i8051_dbg.vhd 0 0} {C:/Modeltech_6.2b/vhdl_src/std/textio.vhd 0 0} {D:/8051/i8051_all_tb.vhd 0 0} {D:/8051/i8051_all.vhd 0 0} {D:/8051/my_lib/i8051_lib.vhd 0 0} {D:/8051/i8051_alu.vhd 0 0} {D:/8051/i8051_ctr.vhd 0 0} {D:/8051/i8051_rom.vhd 0 1}
Project_Major_Version = 6
Project_Minor_Version = 2