📄 altsyncram_tjb2.tdf

📁 用vhdl语言编写的基于FPGA的波形发生器。对于做实验需要产生的波形非常有用。
💻 TDF
📖 第 1 页 / 共 2 页
字号:
上一页 12
			PORT_B_LAST_ADDRESS = 1023,
			PORT_B_LOGICAL_RAM_DEPTH = 1024,
			PORT_B_LOGICAL_RAM_WIDTH = 16,
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
			RAM_BLOCK_TYPE = "auto"
		);
	ram_block1a8 : cyclone_ram_block
		WITH (
			CONNECTIVITY_CHECKING = "OFF",
			LOGICAL_RAM_NAME = "ALTSYNCRAM",
			MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
			OPERATION_MODE = "dual_port",
			PORT_A_ADDRESS_CLEAR = "none",
			PORT_A_ADDRESS_WIDTH = 10,
			PORT_A_DATA_IN_CLEAR = "none",
			PORT_A_DATA_WIDTH = 1,
			PORT_A_FIRST_ADDRESS = 0,
			PORT_A_FIRST_BIT_NUMBER = 8,
			PORT_A_LAST_ADDRESS = 1023,
			PORT_A_LOGICAL_RAM_DEPTH = 1024,
			PORT_A_LOGICAL_RAM_WIDTH = 16,
			PORT_A_WRITE_ENABLE_CLEAR = "none",
			PORT_B_ADDRESS_CLEAR = "none",
			PORT_B_ADDRESS_CLOCK = "clock1",
			PORT_B_ADDRESS_WIDTH = 10,
			PORT_B_DATA_OUT_CLEAR = "none",
			PORT_B_DATA_OUT_CLOCK = "none",
			PORT_B_DATA_WIDTH = 1,
			PORT_B_FIRST_ADDRESS = 0,
			PORT_B_FIRST_BIT_NUMBER = 8,
			PORT_B_LAST_ADDRESS = 1023,
			PORT_B_LOGICAL_RAM_DEPTH = 1024,
			PORT_B_LOGICAL_RAM_WIDTH = 16,
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
			RAM_BLOCK_TYPE = "auto"
		);
	ram_block1a9 : cyclone_ram_block
		WITH (
			CONNECTIVITY_CHECKING = "OFF",
			LOGICAL_RAM_NAME = "ALTSYNCRAM",
			MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
			OPERATION_MODE = "dual_port",
			PORT_A_ADDRESS_CLEAR = "none",
			PORT_A_ADDRESS_WIDTH = 10,
			PORT_A_DATA_IN_CLEAR = "none",
			PORT_A_DATA_WIDTH = 1,
			PORT_A_FIRST_ADDRESS = 0,
			PORT_A_FIRST_BIT_NUMBER = 9,
			PORT_A_LAST_ADDRESS = 1023,
			PORT_A_LOGICAL_RAM_DEPTH = 1024,
			PORT_A_LOGICAL_RAM_WIDTH = 16,
			PORT_A_WRITE_ENABLE_CLEAR = "none",
			PORT_B_ADDRESS_CLEAR = "none",
			PORT_B_ADDRESS_CLOCK = "clock1",
			PORT_B_ADDRESS_WIDTH = 10,
			PORT_B_DATA_OUT_CLEAR = "none",
			PORT_B_DATA_OUT_CLOCK = "none",
			PORT_B_DATA_WIDTH = 1,
			PORT_B_FIRST_ADDRESS = 0,
			PORT_B_FIRST_BIT_NUMBER = 9,
			PORT_B_LAST_ADDRESS = 1023,
			PORT_B_LOGICAL_RAM_DEPTH = 1024,
			PORT_B_LOGICAL_RAM_WIDTH = 16,
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
			RAM_BLOCK_TYPE = "auto"
		);
	ram_block1a10 : cyclone_ram_block
		WITH (
			CONNECTIVITY_CHECKING = "OFF",
			LOGICAL_RAM_NAME = "ALTSYNCRAM",
			MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
			OPERATION_MODE = "dual_port",
			PORT_A_ADDRESS_CLEAR = "none",
			PORT_A_ADDRESS_WIDTH = 10,
			PORT_A_DATA_IN_CLEAR = "none",
			PORT_A_DATA_WIDTH = 1,
			PORT_A_FIRST_ADDRESS = 0,
			PORT_A_FIRST_BIT_NUMBER = 10,
			PORT_A_LAST_ADDRESS = 1023,
			PORT_A_LOGICAL_RAM_DEPTH = 1024,
			PORT_A_LOGICAL_RAM_WIDTH = 16,
			PORT_A_WRITE_ENABLE_CLEAR = "none",
			PORT_B_ADDRESS_CLEAR = "none",
			PORT_B_ADDRESS_CLOCK = "clock1",
			PORT_B_ADDRESS_WIDTH = 10,
			PORT_B_DATA_OUT_CLEAR = "none",
			PORT_B_DATA_OUT_CLOCK = "none",
			PORT_B_DATA_WIDTH = 1,
			PORT_B_FIRST_ADDRESS = 0,
			PORT_B_FIRST_BIT_NUMBER = 10,
			PORT_B_LAST_ADDRESS = 1023,
			PORT_B_LOGICAL_RAM_DEPTH = 1024,
			PORT_B_LOGICAL_RAM_WIDTH = 16,
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
			RAM_BLOCK_TYPE = "auto"
		);
	ram_block1a11 : cyclone_ram_block
		WITH (
			CONNECTIVITY_CHECKING = "OFF",
			LOGICAL_RAM_NAME = "ALTSYNCRAM",
			MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
			OPERATION_MODE = "dual_port",
			PORT_A_ADDRESS_CLEAR = "none",
			PORT_A_ADDRESS_WIDTH = 10,
			PORT_A_DATA_IN_CLEAR = "none",
			PORT_A_DATA_WIDTH = 1,
			PORT_A_FIRST_ADDRESS = 0,
			PORT_A_FIRST_BIT_NUMBER = 11,
			PORT_A_LAST_ADDRESS = 1023,
			PORT_A_LOGICAL_RAM_DEPTH = 1024,
			PORT_A_LOGICAL_RAM_WIDTH = 16,
			PORT_A_WRITE_ENABLE_CLEAR = "none",
			PORT_B_ADDRESS_CLEAR = "none",
			PORT_B_ADDRESS_CLOCK = "clock1",
			PORT_B_ADDRESS_WIDTH = 10,
			PORT_B_DATA_OUT_CLEAR = "none",
			PORT_B_DATA_OUT_CLOCK = "none",
			PORT_B_DATA_WIDTH = 1,
			PORT_B_FIRST_ADDRESS = 0,
			PORT_B_FIRST_BIT_NUMBER = 11,
			PORT_B_LAST_ADDRESS = 1023,
			PORT_B_LOGICAL_RAM_DEPTH = 1024,
			PORT_B_LOGICAL_RAM_WIDTH = 16,
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
			RAM_BLOCK_TYPE = "auto"
		);
	ram_block1a12 : cyclone_ram_block
		WITH (
			CONNECTIVITY_CHECKING = "OFF",
			LOGICAL_RAM_NAME = "ALTSYNCRAM",
			MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
			OPERATION_MODE = "dual_port",
			PORT_A_ADDRESS_CLEAR = "none",
			PORT_A_ADDRESS_WIDTH = 10,
			PORT_A_DATA_IN_CLEAR = "none",
			PORT_A_DATA_WIDTH = 1,
			PORT_A_FIRST_ADDRESS = 0,
			PORT_A_FIRST_BIT_NUMBER = 12,
			PORT_A_LAST_ADDRESS = 1023,
			PORT_A_LOGICAL_RAM_DEPTH = 1024,
			PORT_A_LOGICAL_RAM_WIDTH = 16,
			PORT_A_WRITE_ENABLE_CLEAR = "none",
			PORT_B_ADDRESS_CLEAR = "none",
			PORT_B_ADDRESS_CLOCK = "clock1",
			PORT_B_ADDRESS_WIDTH = 10,
			PORT_B_DATA_OUT_CLEAR = "none",
			PORT_B_DATA_OUT_CLOCK = "none",
			PORT_B_DATA_WIDTH = 1,
			PORT_B_FIRST_ADDRESS = 0,
			PORT_B_FIRST_BIT_NUMBER = 12,
			PORT_B_LAST_ADDRESS = 1023,
			PORT_B_LOGICAL_RAM_DEPTH = 1024,
			PORT_B_LOGICAL_RAM_WIDTH = 16,
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
			RAM_BLOCK_TYPE = "auto"
		);
	ram_block1a13 : cyclone_ram_block
		WITH (
			CONNECTIVITY_CHECKING = "OFF",
			LOGICAL_RAM_NAME = "ALTSYNCRAM",
			MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
			OPERATION_MODE = "dual_port",
			PORT_A_ADDRESS_CLEAR = "none",
			PORT_A_ADDRESS_WIDTH = 10,
			PORT_A_DATA_IN_CLEAR = "none",
			PORT_A_DATA_WIDTH = 1,
			PORT_A_FIRST_ADDRESS = 0,
			PORT_A_FIRST_BIT_NUMBER = 13,
			PORT_A_LAST_ADDRESS = 1023,
			PORT_A_LOGICAL_RAM_DEPTH = 1024,
			PORT_A_LOGICAL_RAM_WIDTH = 16,
			PORT_A_WRITE_ENABLE_CLEAR = "none",
			PORT_B_ADDRESS_CLEAR = "none",
			PORT_B_ADDRESS_CLOCK = "clock1",
			PORT_B_ADDRESS_WIDTH = 10,
			PORT_B_DATA_OUT_CLEAR = "none",
			PORT_B_DATA_OUT_CLOCK = "none",
			PORT_B_DATA_WIDTH = 1,
			PORT_B_FIRST_ADDRESS = 0,
			PORT_B_FIRST_BIT_NUMBER = 13,
			PORT_B_LAST_ADDRESS = 1023,
			PORT_B_LOGICAL_RAM_DEPTH = 1024,
			PORT_B_LOGICAL_RAM_WIDTH = 16,
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
			RAM_BLOCK_TYPE = "auto"
		);
	ram_block1a14 : cyclone_ram_block
		WITH (
			CONNECTIVITY_CHECKING = "OFF",
			LOGICAL_RAM_NAME = "ALTSYNCRAM",
			MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
			OPERATION_MODE = "dual_port",
			PORT_A_ADDRESS_CLEAR = "none",
			PORT_A_ADDRESS_WIDTH = 10,
			PORT_A_DATA_IN_CLEAR = "none",
			PORT_A_DATA_WIDTH = 1,
			PORT_A_FIRST_ADDRESS = 0,
			PORT_A_FIRST_BIT_NUMBER = 14,
			PORT_A_LAST_ADDRESS = 1023,
			PORT_A_LOGICAL_RAM_DEPTH = 1024,
			PORT_A_LOGICAL_RAM_WIDTH = 16,
			PORT_A_WRITE_ENABLE_CLEAR = "none",
			PORT_B_ADDRESS_CLEAR = "none",
			PORT_B_ADDRESS_CLOCK = "clock1",
			PORT_B_ADDRESS_WIDTH = 10,
			PORT_B_DATA_OUT_CLEAR = "none",
			PORT_B_DATA_OUT_CLOCK = "none",
			PORT_B_DATA_WIDTH = 1,
			PORT_B_FIRST_ADDRESS = 0,
			PORT_B_FIRST_BIT_NUMBER = 14,
			PORT_B_LAST_ADDRESS = 1023,
			PORT_B_LOGICAL_RAM_DEPTH = 1024,
			PORT_B_LOGICAL_RAM_WIDTH = 16,
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
			RAM_BLOCK_TYPE = "auto"
		);
	ram_block1a15 : cyclone_ram_block
		WITH (
			CONNECTIVITY_CHECKING = "OFF",
			LOGICAL_RAM_NAME = "ALTSYNCRAM",
			MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
			OPERATION_MODE = "dual_port",
			PORT_A_ADDRESS_CLEAR = "none",
			PORT_A_ADDRESS_WIDTH = 10,
			PORT_A_DATA_IN_CLEAR = "none",
			PORT_A_DATA_WIDTH = 1,
			PORT_A_FIRST_ADDRESS = 0,
			PORT_A_FIRST_BIT_NUMBER = 15,
			PORT_A_LAST_ADDRESS = 1023,
			PORT_A_LOGICAL_RAM_DEPTH = 1024,
			PORT_A_LOGICAL_RAM_WIDTH = 16,
			PORT_A_WRITE_ENABLE_CLEAR = "none",
			PORT_B_ADDRESS_CLEAR = "none",
			PORT_B_ADDRESS_CLOCK = "clock1",
			PORT_B_ADDRESS_WIDTH = 10,
			PORT_B_DATA_OUT_CLEAR = "none",
			PORT_B_DATA_OUT_CLOCK = "none",
			PORT_B_DATA_WIDTH = 1,
			PORT_B_FIRST_ADDRESS = 0,
			PORT_B_FIRST_BIT_NUMBER = 15,
			PORT_B_LAST_ADDRESS = 1023,
			PORT_B_LOGICAL_RAM_DEPTH = 1024,
			PORT_B_LOGICAL_RAM_WIDTH = 16,
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
			RAM_BLOCK_TYPE = "auto"
		);
	address_a_wire[9..0]	: WIRE;
	address_b_wire[9..0]	: WIRE;

BEGIN 
	ram_block1a[15..0].clk0 = clock0;
	ram_block1a[15..0].clk1 = clock1;
	ram_block1a[15..0].ena0 = wren_a;
	ram_block1a[15..0].ena1 = clocken1;
	ram_block1a[15..0].portaaddr[] = ( address_a_wire[9..0]);
	ram_block1a[0].portadatain[] = ( data_a[0..0]);
	ram_block1a[1].portadatain[] = ( data_a[1..1]);
	ram_block1a[2].portadatain[] = ( data_a[2..2]);
	ram_block1a[3].portadatain[] = ( data_a[3..3]);
	ram_block1a[4].portadatain[] = ( data_a[4..4]);
	ram_block1a[5].portadatain[] = ( data_a[5..5]);
	ram_block1a[6].portadatain[] = ( data_a[6..6]);
	ram_block1a[7].portadatain[] = ( data_a[7..7]);
	ram_block1a[8].portadatain[] = ( data_a[8..8]);
	ram_block1a[9].portadatain[] = ( data_a[9..9]);
	ram_block1a[10].portadatain[] = ( data_a[10..10]);
	ram_block1a[11].portadatain[] = ( data_a[11..11]);
	ram_block1a[12].portadatain[] = ( data_a[12..12]);
	ram_block1a[13].portadatain[] = ( data_a[13..13]);
	ram_block1a[14].portadatain[] = ( data_a[14..14]);
	ram_block1a[15].portadatain[] = ( data_a[15..15]);
	ram_block1a[15..0].portawe = B"1111111111111111";
	ram_block1a[15..0].portbaddr[] = ( address_b_wire[9..0]);
	ram_block1a[15..0].portbrewe = B"1111111111111111";
	address_a_wire[] = address_a[];
	address_b_wire[] = address_b[];
	q_b[] = ( ram_block1a[15..0].portbdataout[0..0]);
END;
--VALID FILE
上一页 12
💿 文件大小 1697 K
👤 上传用户 zxk756921815
📂 所属分类 VHDL/FPGA/Verilog
🏷️ 相关标签

#vhdl #FPGA #语言 #编写
⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -