romtest.mpf

我用VHDL写的正弦

; Copyright Mentor Graphics Corporation 2004
;
; All Rights Reserved.
;
; THIS WORK CONTAINS TRADE SECRET AND PROPRIETARY INFORMATION WHICH IS THE PROPERTY OF 
; MENTOR GRAPHICS CORPORATION OR ITS LICENSORS AND IS SUBJECT TO LICENSE TERMS.
;   

[Library]
std = $MODEL_TECH/../std
ieee = $MODEL_TECH/../ieee
verilog = $MODEL_TECH/../verilog
vital2000 = $MODEL_TECH/../vital2000
std_developerskit = $MODEL_TECH/../std_developerskit
synopsys = $MODEL_TECH/../synopsys
modelsim_lib = $MODEL_TECH/../modelsim_lib
;vhdl_psl_checkers = $MODEL_TECH/../vhdl_psl_checkers       // Source files only for this release
;verilog_psl_checkers = $MODEL_TECH/../verilog_psl_checkers // Source files only for this release
;Altera

apex20k = $MODEL_TECH/../altera/vhdl/apex20k

apex20ke = $MODEL_TECH/../altera/vhdl/apex20ke

apexii = $MODEL_TECH/../altera/vhdl/apexii

altera_mf = $MODEL_TECH/../altera/vhdl/altera_mf

altera = $MODEL_TECH/../altera/vhdl/altera

lpm = $MODEL_TECH/../altera/vhdl/220model

220model = $MODEL_TECH/../altera/vhdl/220model

alt_vtl = $MODEL_TECH/../altera/vhdl/alt_vtl

flex6000 = $MODEL_TECH/../altera/vhdl/flex6000

flex10ke = $MODEL_TECH/../altera/vhdl/flex10ke

max = $MODEL_TECH/../altera/vhdl/max

maxii = $MODEL_TECH/../altera/vhdl/maxii

stratix = $MODEL_TECH/../altera/vhdl/stratix

stratixii = $MODEL_TECH/../altera/vhdl/stratixii

stratixiigx = $MODEL_TECH/../altera/vhdl/stratixiigx

cyclone = $MODEL_TECH/../altera/vhdl/cyclone

cycloneii = $MODEL_TECH/../altera/vhdl/cycloneii

cycloneiii = $MODEL_TECH/../altera/vhdl/cycloneiii

sgate = $MODEL_TECH/../altera/vhdl/sgate

stratixiigx_hssi = $MODEL_TECH/../altera/vhdl/stratixiigx_hssi

arriagx_hssi = $MODEL_TECH/../altera/vhdl/arriagx_hssi

arriagx = $MODEL_TECH/../altera/vhdl/arriagx

apex20k_ver = $MODEL_TECH/../altera/verilog/apex20k

apex20ke_ver = $MODEL_TECH/../altera/verilog/apex20ke

apexii_ver = $MODEL_TECH/../altera/verilog/apexii

altera_mf_ver = $MODEL_TECH/../altera/verilog/altera_mf

altera_ver = $MODEL_TECH/../altera/verilog/altera

lpm_ver = $MODEL_TECH/../altera/verilog/220model

220model_ver = $MODEL_TECH/../altera/verilog/220model

alt_ver = $MODEL_TECH/../altera/verilog/alt_vtl

flex6000_ver = $MODEL_TECH/../altera/verilog/flex6000

flex10ke_ver = $MODEL_TECH/../altera/verilog/flex10ke

max_ver = $MODEL_TECH/../altera/verilog/max

maxii_ver = $MODEL_TECH/../altera/verilog/maxii

stratix_ver = $MODEL_TECH/../altera/verilog/stratix

stratixii_ver = $MODEL_TECH/../altera/verilog/stratixii

stratixiigx_ver = $MODEL_TECH/../altera/verilog/stratixiigx

arriagx_ver = $MODEL_TECH/../altera/verilog/arriagx

cyclone_ver = $MODEL_TECH/../altera/verilog/cyclone

cycloneii_ver = $MODEL_TECH/../altera/verilog/cycloneii

cycloneiii_ver = $MODEL_TECH/../altera/verilog/cycloneiii

sgate_ver = $MODEL_TECH/../altera/verilog/sgate

stratixiigx_hssi_ver = $MODEL_TECH/../altera/verilog/stratixiigx_hssi

arriagx_hssi_ver = $MODEL_TECH/../altera/verilog/arriagx_hssi

stratixiii_ver = $MODEL_TECH/../altera/verilog/stratixiii

stratixiii = $MODEL_TECH/../altera/vhdl/stratixiii


work = work
[vcom]
; VHDL93 variable selects language version as the default. 
; Default is VHDL-2002.
; Value of 0 or 1987 for VHDL-1987.
; Value of 1 or 1993 for VHDL-1993.
; Default or value of 2 or 2002 for VHDL-2002.
VHDL93 = 2002

; Show source line containing error. Default is off.
; Show_source = 1

; Turn off unbound-component warnings. Default is on.
; Show_Warning1 = 0

; Turn off process-without-a-wait-statement warnings. Default is on.
; Show_Warning2 = 0

; Turn off null-range warnings. Default is on.
; Show_Warning3 = 0

; Turn off no-space-in-time-literal warnings. Default is on.
; Show_Warning4 = 0

; Turn off multiple-drivers-on-unresolved-signal warnings. Default is on.
; Show_Warning5 = 0

; Turn off optimization for IEEE std_logic_1164 package. Default is on.
; Optimize_1164 = 0

; Turn on resolving of ambiguous function overloading in favor of the
; "explicit" function declaration (not the one automatically created by
; the compiler for each type declaration). Default is off.
; The .ini file has Explict enabled so that std_logic_signed/unsigned
; will match the behavior of synthesis tools.
Explicit = 1

; Turn off acceleration of the VITAL packages. Default is to accelerate.
; NoVital = 1

; Turn off VITAL compliance checking. Default is checking on.
; NoVitalCheck = 1

; Ignore VITAL compliance checking errors. Default is to not ignore.
; IgnoreVitalErrors = 1

; Turn off VITAL compliance checking warnings. Default is to show warnings.
; Show_VitalChecksWarnings = 0

; Turn off PSL assertion warning messges. Default is to show warnings.
; Show_PslChecksWarnings = 0

; Enable parsing of embedded PSL assertions. Default is enabled.
; EmbeddedPsl = 0

; Keep silent about case statement static warnings.
; Default is to give a warning.
; NoCaseStaticError = 1

; Keep silent about warnings caused by aggregates that are not locally static.
; Default is to give a warning.
; NoOthersStaticError = 1

; Treat as errors:
;   case statement static warnings
;   warnings caused by aggregates that are not locally static
; Overrides NoCaseStaticError, NoOthersStaticError settings.
; PedanticErrors = 1

; Turn off inclusion of debugging info within design units.
; Default is to include debugging info.
; NoDebug = 1

; Turn off "Loading..." messages. Default is messages on.
; Quiet = 1

; Turn on some limited synthesis rule compliance checking. Checks only:
;    -- signals used (read) by a process must be in the sensitivity list
; CheckSynthesis = 1

; Activate optimizations on expressions that do not involve signals,
; waits, or function/procedure/task invocations. Default is off.
; ScalarOpts = 1

; Turns on lint-style checking.
; Show_Lint = 1

; Require the user to specify a configuration for all bindings,
; and do not generate a compile time default binding for the
; component. This will result in an elaboration error of
; 'component not bound' if the user fails to do so. Avoids the rare
; issue of a false dependency upon the unused default binding.
; RequireConfigForAllDefaultBinding = 1

; Peform default binding at compile time.
; Default is to do default binding at load time.
; BindAtCompile=1;

; Inhibit range checking on subscripts of arrays. Range checking on
; scalars defined with subtypes is inhibited by default.
; NoIndexCheck = 1

; Inhibit range checks on all (implicit and explicit) assignments to
; scalar objects defined with subtypes.
; NoRangeCheck = 1

[vlog]

; Turn off inclusion of debugging info within design units.
; Default is to include debugging info.
; NoDebug = 1

; Turn on `protect compiler directive processing.
; Default is to ignore `protect directives.
; Protect = 1

; Turn off "Loading..." messages. Default is messages on.
; Quiet = 1

; Turn on Verilog hazard checking (order-dependent accessing of global vars).
; Default is off.
; Hazard = 1

; Turn on converting regular Verilog identifiers to uppercase. Allows case
; insensitivity for module names. Default is no conversion.
; UpCase = 1

; Activate optimizations on expressions that do not involve signals,
; waits, or function/procedure/task invocations. Default is off.
; ScalarOpts = 1

; Turns on lint-style checking.
; Show_Lint = 1

; Show source line containing error. Default is off.
; Show_source = 1

; Turn on bad option warning. Default is off.
; Show_BadOptionWarning = 1

; Revert back to IEEE 1364-1995 syntax, default is 0 (off).
vlog95compat = 0

; Turn off PSL warning messges. Default is to show warnings.
; Show_PslChecksWarnings = 0

; Enable parsing of embedded PSL assertions. Default is enabled.
; EmbeddedPsl = 0

; Set the threshold for automatically identifying sparse Verilog memories.
; A memory with depth equal to or more than the sparse memory threshold gets
; marked as sparse automatically, unless specified otherwise in source code.
; The default is 0 (i.e. no memory is automatically given sparse status)
; SparseMemThreshold = 1048576 

; Set the maximum number of iterations permitted for a generate loop.
; Restricting this permits the implementation to recognize infinite
; generate loops.
; GenerateLoopIterationMax = 100000

; Set the maximum depth permitted for a recursive generate instantiation.
; Restricting this permits the implementation to recognize infinite
; recursions.
; GenerateRecursionDepthMax = 200


[sccom]
; Enable use of SCV include files and library.  Default is off.
; UseScv = 1

; Add C++ compiler options to the sccom command line by using this variable.
; CppOptions = -g

; Use custom C++ compiler located at this path rather than ModelSim default.
; The path should point directly at a compiler executable.
; CppPath = /usr/bin/g++

; Enable verbose messages from sccom.  Default is off.
; SccomVerbose = 1

; sccom logfile.  Default is no logfile.
; SccomLogfile = sccom.log

[vsim]

; vopt flow
; Set to turn on automatic optimization of a design.
; Default is off (pre-6.0 flow without vopt).
; VoptFlow = 1

; Simulator resolution
; Set to fs, ps, ns, us, ms, or sec with optional prefix of 1, 10, or 100.
resolution = 1ns

; User time unit for run commands
; Set to default, fs, ps, ns, us, ms, or sec. The default is to use the
; unit specified for Resolution. For example, if Resolution is 100ps,
; then UserTimeUnit defaults to ps.
; Should generally be set to default.
UserTimeUnit = default

; Default run length
RunLength = 100 ns

; Maximum iterations that can be run without advancing simulation time
IterationLimit = 5000

; Contol PSL Assume during simulation
; Set SimulateAssumeDirectives = 0 to disable assume being simulated as asserts
; Set SimulateAssumeDirectives = 1 to enable assume simulation as asserts
; SimulateAssumeDirectives = 1 

; Directives to license manager can be set either as single value or as
; space separated multi-values:
; vhdl          Immediately reserve a VHDL license
; vlog          Immediately reserve a Verilog license