📄 ps2tolcd.fit.qmsg
字号:
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" { } { } 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 1 " "Info: Average interconnect usage is 0% of the available device resources. Peak interconnect usage is 1%." { } { } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" { } { } 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { } { } 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" { } { } 0}
{ "Warning" "WDAT_PRELIMINARY_TIMING" "EP2C35F484C8 " "Warning: Timing characteristics of device EP2C35F484C8 are preliminary" { } { } 0}
{ "Warning" "WDAT_NO_LOADING_SPECIFIED_ONE_OR_MORE_PINS" "21 " "Warning: Found 21 output pins without output pin load capacitance assignment" { { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "lcd_e 0 " "Warning: Pin \"lcd_e\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "lcd_rw 0 " "Warning: Pin \"lcd_rw\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "lcd_rs 0 " "Warning: Pin \"lcd_rs\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[7\] 0 " "Warning: Pin \"data\[7\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[6\] 0 " "Warning: Pin \"data\[6\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[5\] 0 " "Warning: Pin \"data\[5\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[4\] 0 " "Warning: Pin \"data\[4\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[3\] 0 " "Warning: Pin \"data\[3\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[2\] 0 " "Warning: Pin \"data\[2\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[1\] 0 " "Warning: Pin \"data\[1\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[0\] 0 " "Warning: Pin \"data\[0\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "led\[7\] 0 " "Warning: Pin \"led\[7\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "led\[6\] 0 " "Warning: Pin \"led\[6\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "led\[5\] 0 " "Warning: Pin \"led\[5\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "led\[4\] 0 " "Warning: Pin \"led\[4\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "led\[3\] 0 " "Warning: Pin \"led\[3\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "led\[2\] 0 " "Warning: Pin \"led\[2\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "led\[1\] 0 " "Warning: Pin \"led\[1\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "led\[0\] 0 " "Warning: Pin \"led\[0\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "ps2_clk 0 " "Warning: Pin \"ps2_clk\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "ps2_data 0 " "Warning: Pin \"ps2_data\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} } { } 0}
{ "Warning" "WDAT_NO_LOADING_SPECIFIED_ONE_OR_MORE_PINS" "21 " "Warning: Found 21 output pins without output pin load capacitance assignment" { { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "lcd_e 0 " "Warning: Pin \"lcd_e\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "lcd_rw 0 " "Warning: Pin \"lcd_rw\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "lcd_rs 0 " "Warning: Pin \"lcd_rs\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[7\] 0 " "Warning: Pin \"data\[7\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[6\] 0 " "Warning: Pin \"data\[6\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[5\] 0 " "Warning: Pin \"data\[5\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[4\] 0 " "Warning: Pin \"data\[4\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[3\] 0 " "Warning: Pin \"data\[3\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[2\] 0 " "Warning: Pin \"data\[2\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[1\] 0 " "Warning: Pin \"data\[1\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[0\] 0 " "Warning: Pin \"data\[0\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "led\[7\] 0 " "Warning: Pin \"led\[7\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "led\[6\] 0 " "Warning: Pin \"led\[6\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "led\[5\] 0 " "Warning: Pin \"led\[5\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "led\[4\] 0 " "Warning: Pin \"led\[4\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "led\[3\] 0 " "Warning: Pin \"led\[3\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "led\[2\] 0 " "Warning: Pin \"led\[2\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "led\[1\] 0 " "Warning: Pin \"led\[1\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "led\[0\] 0 " "Warning: Pin \"led\[0\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "ps2_clk 0 " "Warning: Pin \"ps2_clk\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "ps2_data 0 " "Warning: Pin \"ps2_data\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" { } { } 0} } { } 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" { } { } 0}
{ "Warning" "WFSAC_FSAC_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE" "1 " "Warning: The following 1 pins have no output enable or a GND or VCC output enable - later changes to this connectivity may change fitting results" { { "Info" "IFSAC_FSAC_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "ps2_clk a permanently enabled " "Info: Pin ps2_clk has a permanently enabled output enable" { } { { "ps2tolcd.bdf" "" { Schematic "E:/code/EP2C35/S9_PS2_LCD/PROJ/ps2tolcd.bdf" { { 264 608 784 280 "ps2_clk" "" } } } } { "c:/altera/quartus50/bin/Assignment Editor.qase" "" { Assignment "c:/altera/quartus50/bin/Assignment Editor.qase" 1 { { 0 "ps2_clk" } } } } { "E:/code/EP2C35/S9_PS2_LCD/PROJ/db/ps2tolcd_cmp.qrpt" "" { Report "E:/code/EP2C35/S9_PS2_LCD/PROJ/db/ps2tolcd_cmp.qrpt" Compiler "ps2tolcd" "UNKNOWN" "V1" "E:/code/EP2C35/S9_PS2_LCD/PROJ/db/ps2tolcd.quartus_db" { Floorplan "E:/code/EP2C35/S9_PS2_LCD/PROJ/" "" "" { ps2_clk } "NODE_NAME" } "" } } { "E:/code/EP2C35/S9_PS2_LCD/PROJ/ps2tolcd.fld" "" { Floorplan "E:/code/EP2C35/S9_PS2_LCD/PROJ/ps2tolcd.fld" "" "" { ps2_clk } "NODE_NAME" } } } 0} } { } 0}
{ "Warning" "WFSAC_FSAC_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN" "3 " "Warning: The following 3 pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" { { "Info" "IFSAC_FSAC_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "lcd_rw GND " "Info: Pin lcd_rw has GND driving its datain port" { } { { "ps2tolcd.bdf" "" { Schematic "E:/code/EP2C35/S9_PS2_LCD/PROJ/ps2tolcd.bdf" { { 560 856 1032 576 "lcd_rw" "" } } } } { "c:/altera/quartus50/bin/Assignment Editor.qase" "" { Assignment "c:/altera/quartus50/bin/Assignment Editor.qase" 1 { { 0 "lcd_rw" } } } } { "E:/code/EP2C35/S9_PS2_LCD/PROJ/db/ps2tolcd_cmp.qrpt" "" { Report "E:/code/EP2C35/S9_PS2_LCD/PROJ/db/ps2tolcd_cmp.qrpt" Compiler "ps2tolcd" "UNKNOWN" "V1" "E:/code/EP2C35/S9_PS2_LCD/PROJ/db/ps2tolcd.quartus_db" { Floorplan "E:/code/EP2C35/S9_PS2_LCD/PROJ/" "" "" { lcd_rw } "NODE_NAME" } "" } } { "E:/code/EP2C35/S9_PS2_LCD/PROJ/ps2tolcd.fld" "" { Floorplan "E:/code/EP2C35/S9_PS2_LCD/PROJ/ps2tolcd.fld" "" "" { lcd_rw } "NODE_NAME" } } } 0} { "Info" "IFSAC_FSAC_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "led\[7\] GND " "Info: Pin led\[7\] has GND driving its datain port" { } { { "ps2tolcd.bdf" "" { Schematic "E:/code/EP2C35/S9_PS2_LCD/PROJ/ps2tolcd.bdf" { { 360 624 800 376 "led\[7..0\]" "" } } } } { "c:/altera/quartus50/bin/Assignment Editor.qase" "" { Assignment "c:/altera/quartus50/bin/Assignment Editor.qase" 1 { { 0 "led\[7\]" } } } } { "E:/code/EP2C35/S9_PS2_LCD/PROJ/db/ps2tolcd_cmp.qrpt" "" { Report "E:/code/EP2C35/S9_PS2_LCD/PROJ/db/ps2tolcd_cmp.qrpt" Compiler "ps2tolcd" "UNKNOWN" "V1" "E:/code/EP2C35/S9_PS2_LCD/PROJ/db/ps2tolcd.quartus_db" { Floorplan "E:/code/EP2C35/S9_PS2_LCD/PROJ/" "" "" { led[7] } "NODE_NAME" } "" } } { "E:/code/EP2C35/S9_PS2_LCD/PROJ/ps2tolcd.fld" "" { Floorplan "E:/code/EP2C35/S9_PS2_LCD/PROJ/ps2tolcd.fld" "" "" { led[7] } "NODE_NAME" } } } 0} { "Info" "IFSAC_FSAC_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "ps2_clk VCC " "Info: Pin ps2_clk has VCC driving its datain port" { } { { "ps2tolcd.bdf" "" { Schematic "E:/code/EP2C35/S9_PS2_LCD/PROJ/ps2tolcd.bdf" { { 264 608 784 280 "ps2_clk" "" } } } } { "c:/altera/quartus50/bin/Assignment Editor.qase" "" { Assignment "c:/altera/quartus50/bin/Assignment Editor.qase" 1 { { 0 "ps2_clk" } } } } { "E:/code/EP2C35/S9_PS2_LCD/PROJ/db/ps2tolcd_cmp.qrpt" "" { Report "E:/code/EP2C35/S9_PS2_LCD/PROJ/db/ps2tolcd_cmp.qrpt" Compiler "ps2tolcd" "UNKNOWN" "V1" "E:/code/EP2C35/S9_PS2_LCD/PROJ/db/ps2tolcd.quartus_db" { Floorplan "E:/code/EP2C35/S9_PS2_LCD/PROJ/" "" "" { ps2_clk } "NODE_NAME" } "" } } { "E:/code/EP2C35/S9_PS2_LCD/PROJ/ps2tolcd.fld" "" { Floorplan "E:/code/EP2C35/S9_PS2_LCD/PROJ/ps2tolcd.fld" "" "" { ps2_clk } "NODE_NAME" } } } 0} } { } 0}
{ "Info" "IFSAC_FSAC_ALL_OUTPUT_ENABLE_GROUPS" "" "Info: The following groups of pins have the same output enable" { { "Info" "IFSAC_FSAC_SAME_OUTPUT_ENABLE_GROUP" "ps2_keyboard_interface:inst3\|ps2_data_hi_z~29 " "Info: The following pins have the same output enable: ps2_keyboard_interface:inst3\|ps2_data_hi_z~29" { { "Info" "IFSAC_FSAC_SAME_OUTPUT_ENABLE_GROUP_SUB" "bidirectional ps2_data LVTTL " "Info: Type bidirectional pin ps2_data uses the LVTTL I/O standard" { } { { "ps2tolcd.bdf" "" { Schematic "E:/code/EP2C35/S9_PS2_LCD/PROJ/ps2tolcd.bdf" { { 280 608 784 296 "ps2_data" "" } } } } { "c:/altera/quartus50/bin/Assignment Editor.qase" "" { Assignment "c:/altera/quartus50/bin/Assignment Editor.qase" 1 { { 0 "ps2_data" } } } } { "E:/code/EP2C35/S9_PS2_LCD/PROJ/db/ps2tolcd_cmp.qrpt" "" { Report "E:/code/EP2C35/S9_PS2_LCD/PROJ/db/ps2tolcd_cmp.qrpt" Compiler "ps2tolcd" "UNKNOWN" "V1" "E:/code/EP2C35/S9_PS2_LCD/PROJ/db/ps2tolcd.quartus_db" { Floorplan "E:/code/EP2C35/S9_PS2_LCD/PROJ/" "" "" { ps2_data } "NODE_NAME" } "" } } { "E:/code/EP2C35/S9_PS2_LCD/PROJ/ps2tolcd.fld" "" { Floorplan "E:/code/EP2C35/S9_PS2_LCD/PROJ/ps2tolcd.fld" "" "" { ps2_data } "NODE_NAME" } } } 0} } { } 0} } { } 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 47 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 47 warnings" { { "Info" "IQEXE_END_BANNER_TIME" "Sun Feb 11 23:38:16 2007 " "Info: Processing ended: Sun Feb 11 23:38:16 2007" { } { } 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:14 " "Info: Elapsed time: 00:00:14" { } { } 0} } { } 0}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -