config_dac.fit.qmsg

Verilog实现 spi接口的FPGA实现 通过仿真

{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "2.477 ns register register " "Info: Estimated most critical path is register to register delay of 2.477 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns sck_count\[1\] 1 REG LAB_X21_Y6 9 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X21_Y6; Fanout = 9; REG Node = 'sck_count\[1\]'" {  } { { "e:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" "" { sck_count[1] } "NODE_NAME" } } { "config_dac.v" "" { Text "D:/altera/71/config_dac/config_dac.v" 118 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(0.664 ns) + CELL(0.150 ns) 0.814 ns Selector1~58 2 COMB LAB_X22_Y6 2 " "Info: 2: + IC(0.664 ns) + CELL(0.150 ns) = 0.814 ns; Loc. = LAB_X22_Y6; Fanout = 2; COMB Node = 'Selector1~58'" {  } { { "e:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" "0.814 ns" { sck_count[1] Selector1~58 } "NODE_NAME" } } { "config_dac.v" "" { Text "D:/altera/71/config_dac/config_dac.v" 87 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(0.481 ns) + CELL(0.275 ns) 1.570 ns always13~2 3 COMB LAB_X21_Y6 9 " "Info: 3: + IC(0.481 ns) + CELL(0.275 ns) = 1.570 ns; Loc. = LAB_X21_Y6; Fanout = 9; COMB Node = 'always13~2'" {  } { { "e:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" "0.756 ns" { Selector1~58 always13~2 } "NODE_NAME" } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(0.247 ns) + CELL(0.660 ns) 2.477 ns rd_data\[0\]~reg0 4 REG LAB_X21_Y6 1 " "Info: 4: + IC(0.247 ns) + CELL(0.660 ns) = 2.477 ns; Loc. = LAB_X21_Y6; Fanout = 1; REG Node = 'rd_data\[0\]~reg0'" {  } { { "e:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" "0.907 ns" { always13~2 rd_data[0]~reg0 } "NODE_NAME" } } { "config_dac.v" "" { Text "D:/altera/71/config_dac/config_dac.v" 175 0 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "1.085 ns ( 43.80 % ) " "Info: Total cell delay = 1.085 ns ( 43.80 % )" {  } {  } 0 0 "Total cell delay = %1!s! %2!s!" 0 0 "" 0} { "Info" "ITDB_TOTAL_IC_DELAY" "1.392 ns ( 56.20 % ) " "Info: Total interconnect delay = 1.392 ns ( 56.20 % )" {  } {  } 0 0 "Total interconnect delay = %1!s! %2!s!" 0 0 "" 0}  } { { "e:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/71/quartus/bin/TimingClosureFloorplan.fld" "" "2.477 ns" { sck_count[1] Selector1~58 always13~2 rd_data[0]~reg0 } "NODE_NAME" } }  } 0 0 "Estimated most critical path is %2!s! to %3!s! delay of %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 0 " "Info: Average interconnect usage is 0% of the available device resources. Peak interconnect usage is 0%" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "X14_Y0 X28_Y14 " "Info: The peak interconnect region extends from location X14_Y0 to location X28_Y14" {  } {  } 0 0 "The peak interconnect region extends from location %1!s! to location %2!s!" 0 0 "" 0}  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources. Peak interconnect usage is %2!d!%%" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0 "" 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0 "" 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0 "" 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0 0 "Started post-fitting delay annotation" 0 0 "" 0}
{ "Warning" "WDAT_NO_LOADING_SPECIFIED_ONE_OR_MORE_PINS" "13 " "Warning: Found 13 output pins without output pin load capacitance assignment" { { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "rd_data\[0\] 0 " "Info: Pin \"rd_data\[0\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "rd_data\[1\] 0 " "Info: Pin \"rd_data\[1\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "rd_data\[2\] 0 " "Info: Pin \"rd_data\[2\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "rd_data\[3\] 0 " "Info: Pin \"rd_data\[3\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "rd_data\[4\] 0 " "Info: Pin \"rd_data\[4\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "rd_data\[5\] 0 " "Info: Pin \"rd_data\[5\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "rd_data\[6\] 0 " "Info: Pin \"rd_data\[6\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "rd_data\[7\] 0 " "Info: Pin \"rd_data\[7\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "rd_data_valid 0 " "Info: Pin \"rd_data_valid\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "busy 0 " "Info: Pin \"busy\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "spi_ncs 0 " "Info: Pin \"spi_ncs\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "spi_sdio 0 " "Info: Pin \"spi_sdio\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "spi_sck 0 " "Info: Pin \"spi_sck\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0}  } {  } 0 0 "Found %1!d! output pins without output pin load capacitance assignment" 0 0 "" 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0 0 "Delay annotation completed successfully" 0 0 "" 0}
{ "Warning" "WFIOMGR_RESERVE_ASSIGNMENT_FOR_UNUSED_PINS_IS_DEFAULT" "As output driving ground " "Warning: The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'." {  } {  } 0 0 "The Reserve All Unused Pins setting has not been specified, and will default to '%1!s!'." 0 0 "" 0}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "D:/altera/71/config_dac/config_dac.fit.smsg " "Info: Generated suppressed messages file D:/altera/71/config_dac/config_dac.fit.smsg" {  } {  } 0 0 "Generated suppressed messages file %1!s!" 0 0 "" 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 3 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 3 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "181 " "Info: Allocated 181 megabytes of memory during processing" {  } {  } 0 0 "Allocated %1!s! megabytes of memory during processing" 0 0 "" 0} { "Info" "IQEXE_END_BANNER_TIME" "Tue Aug 19 14:15:35 2008 " "Info: Processing ended: Tue Aug 19 14:15:35 2008" {  } {  } 0 0 "Processing ended: %1!s!" 0 0 "" 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:07 " "Info: Elapsed time: 00:00:07" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0 "" 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "" 0}