step_motor.fit.qmsg

本程序设计一个基于FPGA的4相步进电机定位控制系统。由步进电机方向设定电路模块、步进电机步进移动与定位控制模块和编码输出模块构成。前两个模块完成电机旋转方向设定

{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 5.1 Build 176 10/26/2005 SJ Full Version " "Info: Version 5.1 Build 176 10/26/2005 SJ Full Version" {  } {  } 0 0 "%1!s!" 0 0} { "Info" "IQEXE_START_BANNER_TIME" "Sun Aug 03 11:12:53 2008 " "Info: Processing started: Sun Aug 03 11:12:53 2008" {  } {  } 0 0 "Processing started: %1!s!" 0 0}  } {  } 4 0 "Running %2!s! %1!s!" 0 0}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off step_motor -c step_motor " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off step_motor -c step_motor" {  } {  } 0 0 "Command: %1!s!" 0 0}
{ "Info" "IMPP_MPP_AUTO_ASSIGNED_DEVICE" "step_motor EP1S10F484C5 " "Info: Automatically selected device EP1S10F484C5 for design step_motor" {  } {  } 0 0 "Automatically selected device %2!s! for design %1!s!" 0 0}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Info: Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" {  } {  } 0 0 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP1S20F484C5 " "Info: Device EP1S20F484C5 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0}  } {  } 2 0 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0}
{ "Info" "IFSAC_FSAC_PINS_MISSING_LOCATION_INFO" "18 18 " "Info: No exact pin location assignment(s) for 18 pins of 18 total pins" { { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "baBA\[0\] " "Info: Pin baBA\[0\] not assigned to an exact location on the device" {  } { { "step_motor.vhd" "" { Text "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.vhd" 13 -1 0 } } { "d:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "d:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "baBA\[0\]" } } } } { "d:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "d:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "step_motor" "UNKNOWN" "V1" "E:/xuxing/学习资料/Altium翻译/my example/step_motor/db/step_motor.quartus_db" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/" "" "" { baBA[0] } "NODE_NAME" } "" } } { "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" "" { baBA[0] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "baBA\[1\] " "Info: Pin baBA\[1\] not assigned to an exact location on the device" {  } { { "step_motor.vhd" "" { Text "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.vhd" 13 -1 0 } } { "d:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "d:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "baBA\[1\]" } } } } { "d:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "d:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "step_motor" "UNKNOWN" "V1" "E:/xuxing/学习资料/Altium翻译/my example/step_motor/db/step_motor.quartus_db" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/" "" "" { baBA[1] } "NODE_NAME" } "" } } { "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" "" { baBA[1] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "baBA\[2\] " "Info: Pin baBA\[2\] not assigned to an exact location on the device" {  } { { "step_motor.vhd" "" { Text "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.vhd" 13 -1 0 } } { "d:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "d:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "baBA\[2\]" } } } } { "d:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "d:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "step_motor" "UNKNOWN" "V1" "E:/xuxing/学习资料/Altium翻译/my example/step_motor/db/step_motor.quartus_db" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/" "" "" { baBA[2] } "NODE_NAME" } "" } } { "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" "" { baBA[2] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "baBA\[3\] " "Info: Pin baBA\[3\] not assigned to an exact location on the device" {  } { { "step_motor.vhd" "" { Text "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.vhd" 13 -1 0 } } { "d:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "d:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "baBA\[3\]" } } } } { "d:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "d:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "step_motor" "UNKNOWN" "V1" "E:/xuxing/学习资料/Altium翻译/my example/step_motor/db/step_motor.quartus_db" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/" "" "" { baBA[3] } "NODE_NAME" } "" } } { "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" "" { baBA[3] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "clk " "Info: Pin clk not assigned to an exact location on the device" {  } { { "step_motor.vhd" "" { Text "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.vhd" 9 -1 0 } } { "d:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "d:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "clk" } } } } { "d:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "d:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "step_motor" "UNKNOWN" "V1" "E:/xuxing/学习资料/Altium翻译/my example/step_motor/db/step_motor.quartus_db" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/" "" "" { clk } "NODE_NAME" } "" } } { "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" "" { clk } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "manner\[0\] " "Info: Pin manner\[0\] not assigned to an exact location on the device" {  } { { "step_motor.vhd" "" { Text "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.vhd" 11 -1 0 } } { "d:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "d:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "manner\[0\]" } } } } { "d:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "d:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "step_motor" "UNKNOWN" "V1" "E:/xuxing/学习资料/Altium翻译/my example/step_motor/db/step_motor.quartus_db" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/" "" "" { manner[0] } "NODE_NAME" } "" } } { "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" "" { manner[0] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "manner\[1\] " "Info: Pin manner\[1\] not assigned to an exact location on the device" {  } { { "step_motor.vhd" "" { Text "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.vhd" 11 -1 0 } } { "d:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "d:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "manner\[1\]" } } } } { "d:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "d:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "step_motor" "UNKNOWN" "V1" "E:/xuxing/学习资料/Altium翻译/my example/step_motor/db/step_motor.quartus_db" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/" "" "" { manner[1] } "NODE_NAME" } "" } } { "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" "" { manner[1] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "angle\[0\] " "Info: Pin angle\[0\] not assigned to an exact location on the device" {  } { { "step_motor.vhd" "" { Text "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.vhd" 12 -1 0 } } { "d:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "d:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "angle\[0\]" } } } } { "d:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "d:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "step_motor" "UNKNOWN" "V1" "E:/xuxing/学习资料/Altium翻译/my example/step_motor/db/step_motor.quartus_db" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/" "" "" { angle[0] } "NODE_NAME" } "" } } { "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" "" { angle[0] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "reset " "Info: Pin reset not assigned to an exact location on the device" {  } { { "step_motor.vhd" "" { Text "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.vhd" 7 -1 0 } } { "d:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "d:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "reset" } } } } { "d:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "d:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "step_motor" "UNKNOWN" "V1" "E:/xuxing/学习资料/Altium翻译/my example/step_motor/db/step_motor.quartus_db" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/" "" "" { reset } "NODE_NAME" } "" } } { "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" "" { reset } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "ini " "Info: Pin ini not assigned to an exact location on the device" {  } { { "step_motor.vhd" "" { Text "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.vhd" 10 -1 0 } } { "d:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "d:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "ini" } } } } { "d:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "d:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "step_motor" "UNKNOWN" "V1" "E:/xuxing/学习资料/Altium翻译/my example/step_motor/db/step_motor.quartus_db" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/" "" "" { ini } "NODE_NAME" } "" } } { "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" "" { ini } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "dir " "Info: Pin dir not assigned to an exact location on the device" {  } { { "step_motor.vhd" "" { Text "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.vhd" 8 -1 0 } } { "d:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "d:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "dir" } } } } { "d:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "d:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "step_motor" "UNKNOWN" "V1" "E:/xuxing/学习资料/Altium翻译/my example/step_motor/db/step_motor.quartus_db" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/" "" "" { dir } "NODE_NAME" } "" } } { "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" "" { dir } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "angle\[2\] " "Info: Pin angle\[2\] not assigned to an exact location on the device" {  } { { "step_motor.vhd" "" { Text "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.vhd" 12 -1 0 } } { "d:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "d:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "angle\[2\]" } } } } { "d:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "d:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "step_motor" "UNKNOWN" "V1" "E:/xuxing/学习资料/Altium翻译/my example/step_motor/db/step_motor.quartus_db" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/" "" "" { angle[2] } "NODE_NAME" } "" } } { "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" "" { angle[2] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "angle\[3\] " "Info: Pin angle\[3\] not assigned to an exact location on the device" {  } { { "step_motor.vhd" "" { Text "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.vhd" 12 -1 0 } } { "d:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "d:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "angle\[3\]" } } } } { "d:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "d:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "step_motor" "UNKNOWN" "V1" "E:/xuxing/学习资料/Altium翻译/my example/step_motor/db/step_motor.quartus_db" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/" "" "" { angle[3] } "NODE_NAME" } "" } } { "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" "" { angle[3] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "angle\[4\] " "Info: Pin angle\[4\] not assigned to an exact location on the device" {  } { { "step_motor.vhd" "" { Text "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.vhd" 12 -1 0 } } { "d:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "d:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "angle\[4\]" } } } } { "d:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "d:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "step_motor" "UNKNOWN" "V1" "E:/xuxing/学习资料/Altium翻译/my example/step_motor/db/step_motor.quartus_db" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/" "" "" { angle[4] } "NODE_NAME" } "" } } { "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" "" { angle[4] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "angle\[5\] " "Info: Pin angle\[5\] not assigned to an exact location on the device" {  } { { "step_motor.vhd" "" { Text "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.vhd" 12 -1 0 } } { "d:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "d:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "angle\[5\]" } } } } { "d:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "d:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "step_motor" "UNKNOWN" "V1" "E:/xuxing/学习资料/Altium翻译/my example/step_motor/db/step_motor.quartus_db" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/" "" "" { angle[5] } "NODE_NAME" } "" } } { "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" "" { angle[5] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "angle\[6\] " "Info: Pin angle\[6\] not assigned to an exact location on the device" {  } { { "step_motor.vhd" "" { Text "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.vhd" 12 -1 0 } } { "d:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "d:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "angle\[6\]" } } } } { "d:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "d:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "step_motor" "UNKNOWN" "V1" "E:/xuxing/学习资料/Altium翻译/my example/step_motor/db/step_motor.quartus_db" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/" "" "" { angle[6] } "NODE_NAME" } "" } } { "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" "" { angle[6] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "angle\[7\] " "Info: Pin angle\[7\] not assigned to an exact location on the device" {  } { { "step_motor.vhd" "" { Text "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.vhd" 12 -1 0 } } { "d:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "d:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "angle\[7\]" } } } } { "d:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "d:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "step_motor" "UNKNOWN" "V1" "E:/xuxing/学习资料/Altium翻译/my example/step_motor/db/step_motor.quartus_db" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/" "" "" { angle[7] } "NODE_NAME" } "" } } { "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" "" { angle[7] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0} { "Info" "IFSAC_FSAC_PIN_MISSING_LOCATION_INFO" "angle\[1\] " "Info: Pin angle\[1\] not assigned to an exact location on the device" {  } { { "step_motor.vhd" "" { Text "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.vhd" 12 -1 0 } } { "d:/altera/quartus51/bin/Assignment Editor.qase" "" { Assignment "d:/altera/quartus51/bin/Assignment Editor.qase" 1 { { 0 "angle\[1\]" } } } } { "d:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "d:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "step_motor" "UNKNOWN" "V1" "E:/xuxing/学习资料/Altium翻译/my example/step_motor/db/step_motor.quartus_db" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/" "" "" { angle[1] } "NODE_NAME" } "" } } { "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" { Floorplan "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.fld" "" "" { angle[1] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0}  } {  } 0 0 "No exact pin location assignment(s) for %1!d! pins of %2!d! total pins" 0 0}
{ "Info" "ITAN_TDC_DEFAULT_OPTIMIZATION_GOALS" "" "Info: Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" { { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "fmax 1 MHz " "Info: Assuming a global fmax requirement of 1 MHz" {  } {  } 0 0 "Assuming a global %1!s! requirement of %2!s!" 0 0} { "Info" "ITAN_TDC_NO_DEFAULT_REQUIREMENT" "tsu " "Info: Not setting a global tsu requirement" {  } {  } 0 0 "Not setting a global %1!s! requirement" 0 0} { "Info" "ITAN_TDC_NO_DEFAULT_REQUIREMENT" "tco " "Info: Not setting a global tco requirement" {  } {  } 0 0 "Not setting a global %1!s! requirement" 0 0} { "Info" "ITAN_TDC_NO_DEFAULT_REQUIREMENT" "tpd " "Info: Not setting a global tpd requirement" {  } {  } 0 0 "Not setting a global %1!s! requirement" 0 0}  } {  } 0 0 "Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" 0 0}
{ "Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Info: Performing register packing on registers with non-logic cell location assignments" {  } {  } 0 0 "Performing register packing on registers with non-logic cell location assignments" 0 0}
{ "Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Info: Completed register packing on registers with non-logic cell location assignments" {  } {  } 0 0 "Completed register packing on registers with non-logic cell location assignments" 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "User Assigned Global Signals Promotion Operation " "Info: Completed User Assigned Global Signals Promotion Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_ALL_TO_GLOBAL" "clk Global clock in PIN L2 " "Info: Automatically promoted signal \"clk\" to use Global clock in PIN L2" {  } { { "step_motor.vhd" "" { Text "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.vhd" 9 -1 0 } }  } 0 0 "Automatically promoted signal \"%1!s!\" to use %2!s!" 0 0}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_ALL_TO_GLOBAL" "reset Global clock in PIN L3 " "Info: Automatically promoted signal \"reset\" to use Global clock in PIN L3" {  } { { "step_motor.vhd" "" { Text "E:/xuxing/学习资料/Altium翻译/my example/step_motor/step_motor.vhd" 7 -1 0 } }  } 0 0 "Automatically promoted signal \"%1!s!\" to use %2!s!" 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Global Promotion Operation " "Info: Completed Auto Global Promotion Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}