📄 noshake.syr
字号:
Release 6.1i - xst G.23Copyright (c) 1995-2003 Xilinx, Inc. All rights reserved.--> Parameter TMPDIR set to __projnavCPU : 0.00 / 0.44 s | Elapsed : 0.00 / 0.00 s --> Parameter xsthdpdir set to ./xstCPU : 0.00 / 0.44 s | Elapsed : 0.00 / 0.00 s --> Reading design: noshake.prjTABLE OF CONTENTS 1) Synthesis Options Summary 2) HDL Compilation 3) HDL Analysis 4) HDL Synthesis 4.1) HDL Synthesis Report 5) Advanced HDL Synthesis 6) Low Level Synthesis 7) Final Report 7.1) Device utilization summary 7.2) TIMING REPORT=========================================================================* Synthesis Options Summary *=========================================================================---- Source ParametersInput File Name : noshake.prjInput Format : mixedIgnore Synthesis Constraint File : NOVerilog Include Directory : ---- Target ParametersOutput File Name : noshakeOutput Format : NGCTarget Device : xc3s400-4-pq208---- Source OptionsTop Module Name : noshakeAutomatic FSM Extraction : YESFSM Encoding Algorithm : AutoFSM Style : lutRAM Extraction : YesRAM Style : AutoROM Extraction : YesROM Style : AutoMux Extraction : YESMux Style : AutoDecoder Extraction : YESPriority Encoder Extraction : YESShift Register Extraction : YESLogical Shifter Extraction : YESXOR Collapsing : YESResource Sharing : YESMultiplier Style : autoAutomatic Register Balancing : No---- Target OptionsAdd IO Buffers : YESGlobal Maximum Fanout : 500Add Generic Clock Buffer(BUFG) : 8Register Duplication : YESEquivalent register Removal : YESSlice Packing : YESPack IO Registers into IOBs : auto---- General OptionsOptimization Goal : SpeedOptimization Effort : 1Keep Hierarchy : NOGlobal Optimization : AllClockNetsRTL Output : YesWrite Timing Constraints : NOHierarchy Separator : _Bus Delimiter : <>Case Specifier : maintainSlice Utilization Ratio : 100Slice Utilization Ratio Delta : 5---- Other Optionslso : noshake.lsoRead Cores : YEScross_clock_analysis : NOverilog2001 : YESOptimize Instantiated Primitives : NO=========================================================================WARNING:Xst:1885 - LSO file is empty, default list of libraries is used=========================================================================* HDL Compilation *=========================================================================Compiling source file "shake.v"Module <noshake> compiledNo errors in compilationAnalysis of file <noshake.prj> succeeded. =========================================================================* HDL Analysis *=========================================================================Analyzing top module <noshake>.Module <noshake> is correct for synthesis. =========================================================================* HDL Synthesis *=========================================================================Synthesizing Unit <noshake>. Related source file is shake.v.WARNING:Xst:1780 - Signal <counten> is never used or assigned. Found 1-bit register for signal <noshakeb1>. Found 1-bit register for signal <noshakeb2>. Found 1-bit register for signal <noshakeb3>. Found 1-bit register for signal <noshakeb4>. Found 1-bit register for signal <sample>. Found 21-bit up counter for signal <shakecount>. Found 4 1-bit 2-to-1 multiplexers. Summary: inferred 1 Counter(s). inferred 1 D-type flip-flop(s). inferred 4 Multiplexer(s).Unit <noshake> synthesized.=========================================================================HDL Synthesis ReportMacro Statistics# Registers : 5 1-bit register : 5# Counters : 1 21-bit up counter : 1# Multiplexers : 4 2-to-1 multiplexer : 4==================================================================================================================================================* Advanced HDL Synthesis *==================================================================================================================================================* Low Level Synthesis *=========================================================================Optimizing unit <noshake> ...Loading device for application Xst from file '3s400.nph' in environment D:/Xilinx.Mapping all equations...Building and optimizing final netlist ...Found area constraint ratio of 100 (+ 5) on block noshake, actual ratio is 0.=========================================================================* Final Report *=========================================================================Final ResultsRTL Top Level Output File Name : noshake.ngrTop Level Output File Name : noshakeOutput Format : NGCOptimization Goal : SpeedKeep Hierarchy : NODesign Statistics# IOs : 9Macro Statistics :# Registers : 1# 1-bit register : 1# Counters : 1# 21-bit up counter : 1# Multiplexers : 4# 2-to-1 multiplexer : 4Cell Usage :# BELS : 80# GND : 1# LUT1 : 4# LUT2 : 2# LUT2_L : 7# LUT3 : 1# LUT4 : 7# LUT4_D : 4# LUT4_L : 11# MUXCY : 21# VCC : 1# XORCY : 21# FlipFlops/Latches : 26# FDC : 1# FDCP : 4# FDCPE : 21# Clock Buffers : 1# BUFGP : 1# IO Buffers : 8# IBUF : 4# OBUF : 4=========================================================================Device utilization summary:---------------------------Selected Device : 3s400pq208-4 Number of Slices: 22 out of 3584 0% Number of Slice Flip Flops: 26 out of 7168 0% Number of 4 input LUTs: 36 out of 7168 0% Number of bonded IOBs: 8 out of 141 5% Number of GCLKs: 1 out of 8 12% =========================================================================TIMING REPORTNOTE: THESE TIMING NUMBERS ARE ONLY A SYNTHESIS ESTIMATE. FOR ACCURATE TIMING INFORMATION PLEASE REFER TO THE TRACE REPORT GENERATED AFTER PLACE-and-ROUTE.Clock Information:-----------------------------------------------------+------------------------+-------+Clock Signal | Clock buffer(FF name) | Load |-----------------------------------+------------------------+-------+clk | BUFGP | 22 |sample:Q | NONE | 4 |-----------------------------------+------------------------+-------+Timing Summary:---------------Speed Grade: -4 Minimum period: 8.336ns (Maximum Frequency: 119.962MHz) Minimum input arrival time before clock: 2.711ns Maximum output required time after clock: 6.271ns Maximum combinational path delay: No path foundTiming Detail:--------------All values displayed in nanoseconds (ns)-------------------------------------------------------------------------Timing constraint: Default period analysis for Clock 'clk'Delay: 8.336ns (Levels of Logic = 25) Source: shakecount_6 (FF) Destination: shakecount_20 (FF) Source Clock: clk rising Destination Clock: clk rising Data Path: shakecount_6 to shakecount_20 Gate Net Cell:in->out fanout Delay Delay Logical Name (Net Name) ---------------------------------------- ------------ FDCPE:C->Q 2 0.619 0.465 shakecount_6 (shakecount_6) LUT4:I0->O 2 0.720 0.465 _n000072 (CHOICE30) LUT2:I1->O 8 0.720 0.747 _n000073 (CHOICE31) LUT4_D:I3->LO 2 0.720 0.000 _n0000101 (N1195) MUXCY:S->O 1 0.629 0.000 shakecount_inst_cy_0 (shakecount_inst_cy_0) MUXCY:CI->O 1 0.090 0.000 shakecount_inst_cy_1 (shakecount_inst_cy_1) MUXCY:CI->O 1 0.090 0.000 shakecount_inst_cy_2 (shakecount_inst_cy_2) MUXCY:CI->O 1 0.090 0.000 shakecount_inst_cy_3 (shakecount_inst_cy_3) MUXCY:CI->O 1 0.090 0.000 shakecount_inst_cy_4 (shakecount_inst_cy_4) MUXCY:CI->O 1 0.090 0.000 shakecount_inst_cy_5 (shakecount_inst_cy_5) MUXCY:CI->O 1 0.090 0.000 shakecount_inst_cy_6 (shakecount_inst_cy_6) MUXCY:CI->O 1 0.090 0.000 shakecount_inst_cy_7 (shakecount_inst_cy_7) MUXCY:CI->O 1 0.090 0.000 shakecount_inst_cy_8 (shakecount_inst_cy_8) MUXCY:CI->O 1 0.090 0.000 shakecount_inst_cy_9 (shakecount_inst_cy_9) MUXCY:CI->O 1 0.090 0.000 shakecount_inst_cy_10 (shakecount_inst_cy_10) MUXCY:CI->O 1 0.090 0.000 shakecount_inst_cy_11 (shakecount_inst_cy_11) MUXCY:CI->O 1 0.090 0.000 shakecount_inst_cy_12 (shakecount_inst_cy_12) MUXCY:CI->O 1 0.090 0.000 shakecount_inst_cy_13 (shakecount_inst_cy_13) MUXCY:CI->O 1 0.091 0.000 shakecount_inst_cy_14 (shakecount_inst_cy_14) MUXCY:CI->O 1 0.090 0.000 shakecount_inst_cy_15 (shakecount_inst_cy_15) MUXCY:CI->O 1 0.090 0.000 shakecount_inst_cy_16 (shakecount_inst_cy_16) MUXCY:CI->O 1 0.090 0.000 shakecount_inst_cy_17 (shakecount_inst_cy_17) MUXCY:CI->O 1 0.090 0.000 shakecount_inst_cy_18 (shakecount_inst_cy_18) MUXCY:CI->O 1 0.090 0.000 shakecount_inst_cy_19 (shakecount_inst_cy_19) MUXCY:CI->O 0 0.090 0.000 shakecount_inst_cy_20 (shakecount_inst_cy_20) XORCY:CI->O 1 0.939 0.000 shakecount_inst_sum_20 (shakecount_inst_sum_20) FDCPE:D 0.502 shakecount_20 ---------------------------------------- Total 8.336ns (6.659ns logic, 1.677ns route) (79.9% logic, 20.1% route)-------------------------------------------------------------------------Timing constraint: Default OFFSET IN BEFORE for Clock 'sample:Q'Offset: 2.711ns (Levels of Logic = 1) Source: b4 (PAD) Destination: noshakeb4 (FF) Destination Clock: sample:Q rising Data Path: b4 to noshakeb4 Gate Net Cell:in->out fanout Delay Delay Logical Name (Net Name) ---------------------------------------- ------------ IBUF:I->O 7 1.492 0.717 b4_IBUF (b4_IBUF) FDCP:D 0.502 noshakeb4 ---------------------------------------- Total 2.711ns (1.994ns logic, 0.717ns route) (73.6% logic, 26.4% route)-------------------------------------------------------------------------Timing constraint: Default OFFSET OUT AFTER for Clock 'sample:Q'Offset: 6.271ns (Levels of Logic = 1) Source: noshakeb1 (FF) Destination: noshakeb1 (PAD) Source Clock: sample:Q rising Data Path: noshakeb1 to noshakeb1 Gate Net Cell:in->out fanout Delay Delay Logical Name (Net Name) ---------------------------------------- ------------ FDCP:C->Q 1 0.619 0.240 noshakeb1 (noshakeb1_OBUF) OBUF:I->O 5.412 noshakeb1_OBUF (noshakeb1) ---------------------------------------- Total 6.271ns (6.031ns logic, 0.240ns route) (96.2% logic, 3.8% route)=========================================================================CPU : 10.48 / 11.36 s | Elapsed : 10.00 / 11.00 s --> Total memory usage is 68656 kilobytes
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -