am2901.vhd

来自「4位MCU AM2901的完整VHDL程序」· VHDL 代码 · 共 45 行

library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
library basic;
use basic.am2901_comps.all;

entity am2901 is port(
     clk,rst:in std_logic;
     a,b:in unsigned(3 downto 0);
     d:in unsigned(3 downto 0);
     i:in std_logic_vector(8 downto 0);
     c_n:in std_logic;
     oe:in std_logic;
     ram0,ram3:inout std_logic;
     qs0,qs3:inout std_logic;
     y:buffer unsigned(3 downto 0);
     g_bar,p_bar:buffer std_logic;
     ovr:buffer std_logic;
     c_n4:buffer std_logic;
     f_0:buffer std_logic;
     f_3:buffer std_logic);
end am2901;

architecture archam2901 of am2901 is
     alias dest_ctl:std_logic_vector(2 downto 0) is i(8 downto 6);
     alias alu_ctl:std_logic_vector(2 downto 0) is i(5 downto 3);
     alias src_ctl:std_logic_vector(2 downto 0) is i(2 downto 0);
     signal ad,bd:unsigned(3 downto 0);
     signal q:unsigned(3 downto 0);
     signal r,s:unsigned(3 downto 0);
     signal f:unsigned(3 downto 0);
begin

--instantiate and connect components
u1:ram_regs port map(clk=>clk,rst=>rst,a=>a,b=>b,f=>f,dest_ctl=>dest_ctl,ram0=>ram0,ram3=>ram3,ad=>ad,bd=>bd);
u2:q_reg port map(clk=>clk,rst=>rst,f=>f,dest_ctl=>dest_ctl,qs0=>qs0,qs3=>qs3,q=>q);
u3:src_op port map(src_ctl=>src_ctl,d=>d,ad=>ad,bd=>bd,q=>q,r=>r,s=>s);
u4:alu port map(r=>r,s=>s,c_n=>c_n,alu_ctl=>alu_ctl,f=>f,g_bar=>g_bar,p_bar=>p_bar,c_n4=>c_n4,ovr=>ovr);
u5:out_mux port map(ad=>ad,f=>f,dest_ctl=>dest_ctl,oe=>oe,y=>y);

--define f_0 and f_3 outputs
f_0<='0' when f="0000" else 'Z';
f_3<=f(3);

end archam2901;