config.lst

这个是做自动控制的小车的代码

C51 COMPILER V7.20   CONFIG                                                                09/02/2007 21:16:40 PAGE 1   


C51 COMPILER V7.20, COMPILATION OF MODULE CONFIG
OBJECT MODULE PLACED IN config.OBJ
COMPILER INVOKED BY: C:\KEIL\C51\BIN\C51.EXE config.c DEBUG OBJECTEXTEND

line level    source

   1          #include "common.h"
   2          #include "config.h"
   3          void config(){
   4   1      //看门狗禁止
   5   1              WDTCN = 0x07;   
   6   1          WDTCN = 0xDE;   
   7   1              WDTCN = 0xAD;
   8   1              
   9   1      //交叉开关配置，T3＝P0.0,T4=P0.1,测试时将T3与T4相连
  10   1          SFRPAGE = 0x0F;
  11   1          XBR0 = 0x28;            //CEX0-CEX4配置到P0.0-P0.4
  12   1          XBR1 = 0x1e;                 //T0 INT0 T1 INT1 T2   分别配置到P0。5-P1.0,p0.2脚已坏
  13   1          XBR2 = 0x48;             //交叉开关使能，T4使能配置到P1。2
  14   1          XBR3 = 0x01;              //T3配置到p1.1
  15   1      
  16   1      //管脚输出配置，P0口为开漏输出，其中P0.0接上拉电阻，P0为数字输入口
  17   1              SFRPAGE = 0x0F;
  18   1              P0MDOUT = 0xf3; 
  19   1          P1MDOUT = 0xFF;
  20   1          P1MDOUT =0X00; 
  21   1              P5MDOUT =0Xff;
  22   1              P6MDOUT =0XFF;
  23   1          P7MDOUT =0X00;
  24   1              //P1MDIN = 0xFF;   
  25   1      //晶振配置，采用内部晶振8分频
  26   1              SFRPAGE = 0x0F;
  27   1              CLKSEL = 0x00;  
  28   1              OSCXCN = 0x00;  
  29   1              OSCICN = 0x84;  
  30   1      }


MODULE INFORMATION:   STATIC OVERLAYABLE
   CODE SIZE        =     55    ----
   CONSTANT SIZE    =   ----    ----
   XDATA SIZE       =   ----    ----
   PDATA SIZE       =   ----    ----
   DATA SIZE        =   ----    ----
   IDATA SIZE       =   ----    ----
   BIT SIZE         =   ----    ----
END OF MODULE INFORMATION.


C51 COMPILATION COMPLETE.  0 WARNING(S),  0 ERROR(S)