prev_cmp_up3_clock.fit.qmsg

测试人体视觉的反应时间

{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Info: Average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "1 X24_Y0 X35_Y10 " "Info: Peak interconnect usage is 1% of the available device resources in the region that extends from location X24_Y0 to location X35_Y10" {  } {  } 0 0 "Peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "" 0}  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0 "" 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0 "" 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0 "" 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Fixed Delay Chain Operation " "Info: Completed Fixed Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0 "" 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0 0 "Started post-fitting delay annotation" 0 0 "" 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0 0 "Delay annotation completed successfully" 0 0 "" 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Delay Chain Operation " "Info: Completed Auto Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0 "" 0}
{ "Info" "IFSAC_FSAC_GLOBAL_CLK_USES_LAB_LINE_TOP_MSG" "process1~0 " "Info: Node process1~0 uses non-global routing resources to route signals to global destination nodes" { { "Info" "IFSAC_FSAC_GLOBAL_CLK_USES_LAB_LINE" "clear D1 " "Info: Port clear -- assigned as a global for destination node D1 -- routed using non-global resources" {  } { { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { D1 } "NODE_NAME" } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 27 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { D1 } "NODE_NAME" } }  } 0 0 "Port %1!s! -- assigned as a global for destination node %2!s! -- routed using non-global resources" 0 0 "" 0} { "Info" "IFSAC_FSAC_GLOBAL_CLK_USES_LAB_LINE" "clear BCD_SECD0\[3\] " "Info: Port clear -- assigned as a global for destination node BCD_SECD0\[3\] -- routed using non-global resources" {  } { { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_SECD0[3] } "NODE_NAME" } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 244 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_SECD0[3] } "NODE_NAME" } }  } 0 0 "Port %1!s! -- assigned as a global for destination node %2!s! -- routed using non-global resources" 0 0 "" 0} { "Info" "IFSAC_FSAC_GLOBAL_CLK_USES_LAB_LINE" "clear BCD_SECD0\[2\] " "Info: Port clear -- assigned as a global for destination node BCD_SECD0\[2\] -- routed using non-global resources" {  } { { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_SECD0[2] } "NODE_NAME" } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 244 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_SECD0[2] } "NODE_NAME" } }  } 0 0 "Port %1!s! -- assigned as a global for destination node %2!s! -- routed using non-global resources" 0 0 "" 0} { "Info" "IFSAC_FSAC_GLOBAL_CLK_USES_LAB_LINE" "clear BCD_SECD0\[1\] " "Info: Port clear -- assigned as a global for destination node BCD_SECD0\[1\] -- routed using non-global resources" {  } { { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_SECD0[1] } "NODE_NAME" } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 244 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_SECD0[1] } "NODE_NAME" } }  } 0 0 "Port %1!s! -- assigned as a global for destination node %2!s! -- routed using non-global resources" 0 0 "" 0} { "Info" "IFSAC_FSAC_GLOBAL_CLK_USES_LAB_LINE" "clear BCD_SECD0\[0\] " "Info: Port clear -- assigned as a global for destination node BCD_SECD0\[0\] -- routed using non-global resources" {  } { { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_SECD0[0] } "NODE_NAME" } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 244 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_SECD0[0] } "NODE_NAME" } }  } 0 0 "Port %1!s! -- assigned as a global for destination node %2!s! -- routed using non-global resources" 0 0 "" 0} { "Info" "IFSAC_FSAC_GLOBAL_CLK_USES_LAB_LINE" "clear BCD_3CAI\[1\] " "Info: Port clear -- assigned as a global for destination node BCD_3CAI\[1\] -- routed using non-global resources" {  } { { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_3CAI[1] } "NODE_NAME" } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 244 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_3CAI[1] } "NODE_NAME" } }  } 0 0 "Port %1!s! -- assigned as a global for destination node %2!s! -- routed using non-global resources" 0 0 "" 0} { "Info" "IFSAC_FSAC_GLOBAL_CLK_USES_LAB_LINE" "clear BCD_3CAI\[0\] " "Info: Port clear -- assigned as a global for destination node BCD_3CAI\[0\] -- routed using non-global resources" {  } { { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_3CAI[0] } "NODE_NAME" } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 244 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_3CAI[0] } "NODE_NAME" } }  } 0 0 "Port %1!s! -- assigned as a global for destination node %2!s! -- routed using non-global resources" 0 0 "" 0} { "Info" "IFSAC_FSAC_GLOBAL_CLK_USES_LAB_LINE" "clear BCD_3CAI\[3\] " "Info: Port clear -- assigned as a global for destination node BCD_3CAI\[3\] -- routed using non-global resources" {  } { { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_3CAI[3] } "NODE_NAME" } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 244 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_3CAI[3] } "NODE_NAME" } }  } 0 0 "Port %1!s! -- assigned as a global for destination node %2!s! -- routed using non-global resources" 0 0 "" 0} { "Info" "IFSAC_FSAC_GLOBAL_CLK_USES_LAB_LINE" "clear BCD_3CAI\[2\] " "Info: Port clear -- assigned as a global for destination node BCD_3CAI\[2\] -- routed using non-global resources" {  } { { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_3CAI[2] } "NODE_NAME" } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 244 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_3CAI[2] } "NODE_NAME" } }  } 0 0 "Port %1!s! -- assigned as a global for destination node %2!s! -- routed using non-global resources" 0 0 "" 0} { "Info" "IFSAC_FSAC_GLOBAL_CLK_USES_LAB_LINE" "clear BCD_SECD1\[2\] " "Info: Port clear -- assigned as a global for destination node BCD_SECD1\[2\] -- routed using non-global resources" {  } { { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_SECD1[2] } "NODE_NAME" } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 244 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_SECD1[2] } "NODE_NAME" } }  } 0 0 "Port %1!s! -- assigned as a global for destination node %2!s! -- routed using non-global resources" 0 0 "" 0} { "Info" "IFSAC_FSAC_GLOBAL_CLK_USES_LAB_LINE" "clear BCD_SECD1\[1\] " "Info: Port clear -- assigned as a global for destination node BCD_SECD1\[1\] -- routed using non-global resources" {  } { { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_SECD1[1] } "NODE_NAME" } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 244 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_SECD1[1] } "NODE_NAME" } }  } 0 0 "Port %1!s! -- assigned as a global for destination node %2!s! -- routed using non-global resources" 0 0 "" 0} { "Info" "IFSAC_FSAC_GLOBAL_CLK_USES_LAB_LINE" "clear BCD_SECD1\[0\] " "Info: Port clear -- assigned as a global for destination node BCD_SECD1\[0\] -- routed using non-global resources" {  } { { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_SECD1[0] } "NODE_NAME" } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 244 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { BCD_SECD1[0] } "NODE_NAME" } }  } 0 0 "Port %1!s! -- assigned as a global for destination node %2!s! -- routed using non-global resources" 0 0 "" 0}  } { { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { process1~0 } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { process1~0 } "NODE_NAME" } }  } 0 0 "Node %1!s! uses non-global routing resources to route signals to global destination nodes" 0 0 "" 0}
{ "Warning" "WFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE" "8 " "Warning: Following 8 pins have no output enable or a GND or VCC output enable - later changes to this connectivity may change fitting results" { { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "DATA_BUS\[0\] a permanently enabled " "Info: Pin DATA_BUS\[0\] has a permanently enabled output enable" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { DATA_BUS[0] } } } { "c:/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "DATA_BUS\[0\]" } } } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 11 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { DATA_BUS[0] } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { DATA_BUS[0] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "DATA_BUS\[1\] a permanently enabled " "Info: Pin DATA_BUS\[1\] has a permanently enabled output enable" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { DATA_BUS[1] } } } { "c:/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "DATA_BUS\[1\]" } } } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 11 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { DATA_BUS[1] } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { DATA_BUS[1] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "DATA_BUS\[2\] a permanently enabled " "Info: Pin DATA_BUS\[2\] has a permanently enabled output enable" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { DATA_BUS[2] } } } { "c:/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "DATA_BUS\[2\]" } } } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 11 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { DATA_BUS[2] } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { DATA_BUS[2] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "DATA_BUS\[3\] a permanently enabled " "Info: Pin DATA_BUS\[3\] has a permanently enabled output enable" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { DATA_BUS[3] } } } { "c:/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "DATA_BUS\[3\]" } } } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 11 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { DATA_BUS[3] } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { DATA_BUS[3] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "DATA_BUS\[4\] a permanently enabled " "Info: Pin DATA_BUS\[4\] has a permanently enabled output enable" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { DATA_BUS[4] } } } { "c:/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "DATA_BUS\[4\]" } } } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 11 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { DATA_BUS[4] } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { DATA_BUS[4] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "DATA_BUS\[5\] a permanently enabled " "Info: Pin DATA_BUS\[5\] has a permanently enabled output enable" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { DATA_BUS[5] } } } { "c:/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "DATA_BUS\[5\]" } } } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 11 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { DATA_BUS[5] } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { DATA_BUS[5] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "DATA_BUS\[6\] a permanently enabled " "Info: Pin DATA_BUS\[6\] has a permanently enabled output enable" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { DATA_BUS[6] } } } { "c:/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "DATA_BUS\[6\]" } } } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 11 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { DATA_BUS[6] } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { DATA_BUS[6] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "DATA_BUS\[7\] a permanently enabled " "Info: Pin DATA_BUS\[7\] has a permanently enabled output enable" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { DATA_BUS[7] } } } { "c:/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "DATA_BUS\[7\]" } } } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 11 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { DATA_BUS[7] } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { DATA_BUS[7] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0}  } {  } 0 0 "Following %1!d! pins have no output enable or a GND or VCC output enable - later changes to this connectivity may change fitting results" 0 0 "" 0}
{ "Warning" "WFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN" "5 " "Warning: Following 5 pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" { { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "RESET_LED GND " "Info: Pin RESET_LED has GND driving its datain port" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { RESET_LED } } } { "c:/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "RESET_LED" } } } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 9 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { RESET_LED } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { RESET_LED } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "SEC_LED GND " "Info: Pin SEC_LED has GND driving its datain port" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { SEC_LED } } } { "c:/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "SEC_LED" } } } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 9 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { SEC_LED } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { SEC_LED } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "Q_LED GND " "Info: Pin Q_LED has GND driving its datain port" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { Q_LED } } } { "c:/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "Q_LED" } } } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 9 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { Q_LED } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { Q_LED } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "LCD_RW GND " "Info: Pin LCD_RW has GND driving its datain port" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { LCD_RW } } } { "c:/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "LCD_RW" } } } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 10 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { LCD_RW } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { LCD_RW } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "DATA_BUS\[6\] GND " "Info: Pin DATA_BUS\[6\] has GND driving its datain port" {  } { { "c:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72/quartus/bin/pin_planner.ppl" { DATA_BUS[6] } } } { "c:/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "DATA_BUS\[6\]" } } } } { "UP3_CLOCK.vhd" "" { Text "D:/实验5-时钟设计11/UP3_CLOCK.vhd" 11 -1 0 } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { DATA_BUS[6] } "NODE_NAME" } } { "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { DATA_BUS[6] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0}  } {  } 0 0 "Following %1!d! pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" 0 0 "" 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 4 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 4 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "172 " "Info: Allocated 172 megabytes of memory during processing" {  } {  } 0 0 "Allocated %1!s! megabytes of memory during processing" 0 0 "" 0} { "Info" "IQEXE_END_BANNER_TIME" "Wed Jul 23 11:16:30 2008 " "Info: Processing ended: Wed Jul 23 11:16:30 2008" {  } {  } 0 0 "Processing ended: %1!s!" 0 0 "" 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Info: Elapsed time: 00:00:04" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0 "" 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "" 0}