📄 mcu8951.qsf
字号:
# Copyright (C) 1991-2004 Altera Corporation
# Any megafunction design, and related netlist (encrypted or decrypted),
# support information, device programming or simulation file, and any other
# associated documentation or information provided by Altera or a partner
# under Altera's Megafunction Partnership Program may be used only
# to program PLD devices (but not masked PLD devices) from Altera. Any
# other use of such megafunction design, netlist, support information,
# device programming or simulation file, or any other related documentation
# or information is prohibited for any other purpose, including, but not
# limited to modification, reverse engineering, de-compiling, or use with
# any other silicon devices, unless such use is explicitly licensed under
# a separate agreement with Altera or a megafunction partner. Title to the
# intellectual property, including patents, copyrights, trademarks, trade
# secrets, or maskworks, embodied in any such megafunction design, netlist,
# support information, device programming or simulation file, or any other
# related documentation or information provided by Altera or a megafunction
# partner, remains with Altera, the megafunction partner, or their respective
# licensors. No other licenses, including any licenses needed under any third
# party's intellectual property, are provided herein.
# The default values for assignments are stored in the file
# MCU8951_assignment_defaults.qdf
# If this file doesn't exist, and for assignments not listed, see file
# assignment_defaults.qdf
# Altera recommends that you do not modify this file. This
# file is updated automatically by the Quartus II software
# and any changes you make may be lost or overwritten.
# Project-Wide Assignments
# ========================
set_global_assignment -name ORIGINAL_QUARTUS_VERSION 4.1
set_global_assignment -name PROJECT_CREATION_TIME_DATE "13:52:23 AUGUST 25, 2005"
set_global_assignment -name LAST_QUARTUS_VERSION 6.0
set_global_assignment -name VHDL_FILE IRAM.VHD
set_global_assignment -name VHDL_FILE ROM4K.VHD
set_global_assignment -name VHDL_FILE reg8b.vhd
set_global_assignment -name VHDL_FILE ETESTER.VHD
set_global_assignment -name VHDL_FILE reg4b.vhd
set_global_assignment -name VHDL_FILE DECODR.vhd
set_global_assignment -name VHDL_FILE CNT4B.vhd
# Pin & Location Assignments
# ==========================
set_location_assignment PIN_3 -to LEDA[0]
set_location_assignment PIN_35 -to LEDA[1]
set_location_assignment PIN_34 -to LEDA[2]
set_location_assignment PIN_33 -to LEDA[3]
set_location_assignment PIN_31 -to LEDB[0]
set_location_assignment PIN_30 -to LEDB[1]
set_location_assignment PIN_15 -to LEDB[2]
set_location_assignment PIN_14 -to LEDB[3]
# Analysis & Synthesis Assignments
# ================================
set_global_assignment -name DEVICE_FILTER_SPEED_GRADE 8
set_global_assignment -name FAMILY "Cyclone II"
set_global_assignment -name TOP_LEVEL_ENTITY MCU8951
set_global_assignment -name AUTO_ENABLE_SMART_COMPILE on
# Fitter Assignments
# ==================
set_global_assignment -name DEVICE EP2C8Q208C8
set_global_assignment -name RESERVE_ASDO_AFTER_CONFIGURATION "AS OUTPUT DRIVING AN UNSPECIFIED SIGNAL"
set_global_assignment -name RESERVE_ALL_UNUSED_PINS "AS INPUT TRI-STATED"
set_global_assignment -name WEAK_PULL_UP_RESISTOR OFF
set_global_assignment -name FITTER_EFFORT "STANDARD FIT"
# Assembler Assignments
# =====================
set_global_assignment -name CYCLONE_CONFIGURATION_DEVICE EPCS1
# SignalTap II Assignments
# ========================
set_global_assignment -name ENABLE_SIGNALTAP off
# LogicLock Region Assignments
# ============================
set_global_assignment -name LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT OFF
set_global_assignment -name DEVICE_FILTER_PACKAGE PQFP
set_global_assignment -name DEVICE_FILTER_PIN_COUNT 208
set_location_assignment PIN_97 -to K1P97
set_location_assignment PIN_99 -to K2P99
set_location_assignment PIN_56 -to D1
set_location_assignment PIN_57 -to D2
set_location_assignment PIN_75 -to D3
set_location_assignment PIN_76 -to D4
set_location_assignment PIN_92 -to D5
set_location_assignment PIN_94 -to D6
set_location_assignment PIN_95 -to D7
set_location_assignment PIN_96 -to D8
set_location_assignment PIN_152 -to K5
set_location_assignment PIN_142 -to K6
set_location_assignment PIN_141 -to K7
set_location_assignment PIN_146 -to K8
set_location_assignment PIN_139 -to K9
set_location_assignment PIN_147 -to K10
set_location_assignment PIN_149 -to K11
set_location_assignment PIN_150 -to K12
set_location_assignment PIN_23 -to CLK
set_global_assignment -name STRATIX_CONFIGURATION_DEVICE EPCS4
set_global_assignment -name RESERVE_ALL_UNUSED_PINS_NO_OUTPUT_GND "AS INPUT TRI-STATED"
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -