stp2.stp

用DE2板子实现的正选信号发生器,需安装quartus2软件,硬件需要DE2的开发板

<session jtag_chain="USB-Blaster [USB-0]" jtag_device="@1: EP2C35 (0x020B40DD)" sof_file="sin_gen_time_limited.sof">
  <display_tree gui_logging_enabled="0">
    <display_branch instance="auto_signaltap_0" log="USE_GLOBAL_TEMP" signal_set="USE_GLOBAL_TEMP" trigger="USE_GLOBAL_TEMP"/>
  </display_tree>
  <instance compilation_mode="full" entity_name="sld_signaltap" is_auto_node="yes" is_expanded="true" name="auto_signaltap_0" source_file="sld_signaltap.vhd">
    <node_ip_info instance_id="0" mfg_id="110" node_id="0" version="4"/>
    <position_info>
      <single attribute="active tab" value="0"/>
      <single attribute="data horizontal scroll position" value="0"/>
      <single attribute="data vertical scroll position" value="0"/>
      <single attribute="zoom level denominator" value="1"/>
      <single attribute="zoom level numerator" value="1"/>
      <single attribute="zoom offset denominator" value="1"/>
      <single attribute="zoom offset numerator" value="122880"/>
    </position_info>
    <signal_set global_temp="1" name="signal_set: 2007/09/21 11:40:27  #0">
      <clock name="clk10m" polarity="posedge"/>
      <config ram_type="M4K" reserved_data_nodes="0" reserved_trigger_nodes="0" sample_depth="8192" trigger_in_enable="no" trigger_out_enable="no"/>
      <top_entity/>
      <signal_vec>
        <trigger_input_vec>
          <wire connection_status="true" name="am_cnt[0]" tap_mode="classic" type="output pin"/>
          <wire connection_status="true" name="am_cnt[1]" tap_mode="classic" type="output pin"/>
          <wire connection_status="true" name="am_cnt[2]" tap_mode="classic" type="output pin"/>
          <wire connection_status="true" name="am_cnt[3]" tap_mode="classic" type="output pin"/>
          <wire connection_status="true" name="am_cnt[4]" tap_mode="classic" type="output pin"/>
          <wire connection_status="true" name="am_out[0]" tap_mode="classic" type="output pin"/>
          <wire connection_status="true" name="am_out[10]" tap_mode="classic" type="output pin"/>
          <wire connection_status="true" name="am_out[11]" tap_mode="classic" type="output pin"/>