clok.fit

消抖程序

-- MAX+plus II Compiler Fit File      
-- Version 10.1 06/12/2001            
-- Compiled: 04/16/2008 22:11:02      

-- Copyright (C) 1988-2001 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "clok"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk_min"                      : INPUT_PIN  = 1      ;
    "flag2"                        : INPUT_PIN  = 2      ;
    "hour10"                       : INPUT_PIN  = 64     ;
    "hour11"                       : INPUT_PIN  = 36     ;
    "hour12"                       : INPUT_PIN  = 5      ;
    "hour13"                       : INPUT_PIN  = 37     ;
    "hour20"                       : INPUT_PIN  = 3      ;
    "hour21"                       : INPUT_PIN  = 66     ;
    "hour22"                       : INPUT_PIN  = 38     ;
    "hour23"                       : INPUT_PIN  = 11     ;
    "sec10"                        : INPUT_PIN  = 18     ;
    "sec11"                        : INPUT_PIN  = 19     ;
    "sec12"                        : INPUT_PIN  = 17     ;
    "sec13"                        : INPUT_PIN  = 81     ;
    "sec20"                        : INPUT_PIN  = 42     ;
    "sec21"                        : INPUT_PIN  = 44     ;
    "sec22"                        : INPUT_PIN  = 84     ;
    "sec23"                        : INPUT_PIN  = 43     ;
    "time10"                       : OUTPUT_PIN = 83     ;
    "time11"                       : OUTPUT_PIN = 72     ;
    "time12"                       : OUTPUT_PIN = 47     ;
    "time13"                       : OUTPUT_PIN = 71     ;
    "time20"                       : OUTPUT_PIN = 70     ;
    "time21"                       : OUTPUT_PIN = 16     ;
    "time22"                       : OUTPUT_PIN = 69     ;
    "time23"                       : OUTPUT_PIN = 73     ;
    "time30"                       : OUTPUT_PIN = 21     ;
    "time31"                       : OUTPUT_PIN = 24     ;
    "time32"                       : OUTPUT_PIN = 67     ;
    "time33"                       : OUTPUT_PIN = 65     ;
    "time40"                       : OUTPUT_PIN = 22     ;
    "time41"                       : OUTPUT_PIN = 23     ;
    "time42"                       : OUTPUT_PIN = 8      ;
    "time43"                       : OUTPUT_PIN = 25     ;
    "|COUNT24:13|LPM_ADD_SUB:123|addcore:adder|:121" : LOCATION   = LC4_B7 ;
    "|COUNT24:13|LPM_ADD_SUB:123|addcore:adder|:133" : LOCATION   = LC8_B8 ;
    "|COUNT24:13|LPM_ADD_SUB:123|addcore:adder|:150" : LOCATION   = LC4_B3 ;
    "|COUNT24:13|LPM_ADD_SUB:123|addcore:adder|:152" : LOCATION   = LC6_B8 ;
    "|COUNT24:13|LPM_ADD_SUB:123|addcore:adder|:153" : LOCATION   = LC3_B4 ;
    "|COUNT24:13|LPM_ADD_SUB:123|addcore:adder|:154" : LOCATION   = LC5_B4 ;
    "|COUNT24:13|LPM_ADD_SUB:123|addcore:adder|:155" : LOCATION   = LC2_B4 ;
    "|COUNT24:13|LPM_ADD_SUB:194|addcore:adder|pcarry2" : LOCATION   = LC8_B3 ;
    "|COUNT24:13|LPM_ADD_SUB:194|addcore:adder|:133" : LOCATION   = LC5_B8 ;
    "|COUNT24:13|LPM_ADD_SUB:194|addcore:adder|:137" : LOCATION   = LC6_B4 ;
    "|COUNT24:13|LPM_ADD_SUB:194|addcore:adder|:141" : LOCATION   = LC1_B4 ;
    "|COUNT24:13|:21"              : LOCATION   = LC8_B7 ;  -- |COUNT24:13|count7
    "|COUNT24:13|:22"              : LOCATION   = LC8_B4 ;  -- |COUNT24:13|count6
    "|COUNT24:13|:23"              : LOCATION   = LC4_B8 ;  -- |COUNT24:13|count5
    "|COUNT24:13|:24"              : LOCATION   = LC2_B7 ;  -- |COUNT24:13|count4
    "|COUNT24:13|:25"              : LOCATION   = LC5_B5 ;  -- |COUNT24:13|count3
    "|COUNT24:13|:26"              : LOCATION   = LC1_B3 ;  -- |COUNT24:13|count2
    "|COUNT24:13|:27"              : LOCATION   = LC6_B7 ;  -- |COUNT24:13|count1
    "|COUNT24:13|:28"              : LOCATION   = LC1_B7 ;  -- |COUNT24:13|count0
    "|COUNT24:13|:106"             : LOCATION   = LC3_B8 ;
    "|COUNT24:13|~106~1"           : LOCATION   = LC4_B4 ;
    "|COUNT24:13|:159"             : LOCATION   = LC1_B8 ;
    "|COUNT24:13|:181"             : LOCATION   = LC7_B3 ;
    "|COUNT24:13|:185"             : LOCATION   = LC3_B3 ;
    "|COUNT24:13|:204"             : LOCATION   = LC3_B7 ;
    "|COUNT24:13|:210"             : LOCATION   = LC7_B4 ;
    "|COUNT24:13|:216"             : LOCATION   = LC7_B8 ;
    "|COUNT24:13|:222"             : LOCATION   = LC2_B8 ;
    "|COUNT24:13|:234"             : LOCATION   = LC6_B3 ;
    "|COUNT24:13|:235"             : LOCATION   = LC5_B3 ;
    "|COUNT24:13|:240"             : LOCATION   = LC7_B7 ;
    "|COUNT24:13|:242"             : LOCATION   = LC5_B7 ;
    "|COUNT24:13|~282~1"           : LOCATION   = LC2_B3 ;
    "|COUNT60:14|LPM_ADD_SUB:129|addcore:adder|:125" : LOCATION   = LC3_A14;
    "|COUNT60:14|LPM_ADD_SUB:129|addcore:adder|:133" : LOCATION   = LC4_A17;
    "|COUNT60:14|LPM_ADD_SUB:129|addcore:adder|:149" : LOCATION   = LC2_A14;
    "|COUNT60:14|LPM_ADD_SUB:129|addcore:adder|:150" : LOCATION   = LC5_A14;
    "|COUNT60:14|LPM_ADD_SUB:129|addcore:adder|:152" : LOCATION   = LC6_A17;
    "|COUNT60:14|LPM_ADD_SUB:129|addcore:adder|:153" : LOCATION   = LC1_A15;
    "|COUNT60:14|LPM_ADD_SUB:129|addcore:adder|:154" : LOCATION   = LC3_A15;
    "|COUNT60:14|LPM_ADD_SUB:129|addcore:adder|:155" : LOCATION   = LC7_A15;
    "|COUNT60:14|LPM_ADD_SUB:208|addcore:adder|pcarry2" : LOCATION   = LC5_A21;
    "|COUNT60:14|LPM_ADD_SUB:208|addcore:adder|:133" : LOCATION   = LC3_A17;
    "|COUNT60:14|LPM_ADD_SUB:208|addcore:adder|:137" : LOCATION   = LC4_A15;
    "|COUNT60:14|LPM_ADD_SUB:208|addcore:adder|:141" : LOCATION   = LC6_A15;
    "|COUNT60:14|:19"              : LOCATION   = LC7_B5 ;
    "|COUNT60:14|:23"              : LOCATION   = LC1_A13;  -- |COUNT60:14|count7
    "|COUNT60:14|:24"              : LOCATION   = LC8_A15;  -- |COUNT60:14|count6
    "|COUNT60:14|:25"              : LOCATION   = LC1_A17;  -- |COUNT60:14|count5
    "|COUNT60:14|:26"              : LOCATION   = LC5_A17;  -- |COUNT60:14|count4
    "|COUNT60:14|:27"              : LOCATION   = LC4_A21;  -- |COUNT60:14|count3
    "|COUNT60:14|:28"              : LOCATION   = LC7_A14;  -- |COUNT60:14|count2
    "|COUNT60:14|:29"              : LOCATION   = LC3_A21;  -- |COUNT60:14|count1
    "|COUNT60:14|:30"              : LOCATION   = LC8_A14;  -- |COUNT60:14|count0
    "|COUNT60:14|:110"             : LOCATION   = LC1_A14;
    "|COUNT60:14|~110~1"           : LOCATION   = LC4_A14;
    "|COUNT60:14|~110~2"           : LOCATION   = LC6_A14;
    "|COUNT60:14|:173"             : LOCATION   = LC2_A17;
    "|COUNT60:14|:199"             : LOCATION   = LC8_A21;
    "|COUNT60:14|:218"             : LOCATION   = LC2_A15;
    "|COUNT60:14|:224"             : LOCATION   = LC5_A15;
    "|COUNT60:14|:230"             : LOCATION   = LC8_A17;
    "|COUNT60:14|:236"             : LOCATION   = LC7_A17;
    "|COUNT60:14|:248"             : LOCATION   = LC6_A21;
    "|COUNT60:14|:250"             : LOCATION   = LC2_A21;
    "|COUNT60:14|:254"             : LOCATION   = LC1_A21;
    "|COUNT60:14|~303~1"           : LOCATION   = LC7_A21;
    "flag2~1"                      : LOCATION   = LC1_B5 ;

END;