che.opt

自制小型遥控车 可用遥控控制前进 后退 左转右转（加转向灯）

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.s*; *.src; *.a*)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt; *.h; *.inc)
 pExt (*.plm)
 CppX (*.cpp)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (Target 1), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(Source Group 1),1,0,0

OPTFFF 1,1,2,0,0,0,0,0,<.\STARTUP.A51><STARTUP.A51> 
OPTFFF 1,2,1,754974723,0,1,15,0,<.\qudong.c><qudong.c> { 44,0,0,0,2,0,0,0,3,0,0,0,0,0,0,0,147,1,0,0,252,255,255,255,226,255,255,255,44,0,0,0,58,0,0,0,8,3,0,0,174,1,0,0 }
OPTFFF 1,3,1,654311425,0,3,3,0,<.\yao_kong.c><yao_kong.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,66,0,0,0,87,0,0,0,30,3,0,0,203,1,0,0 }
OPTFFF 1,4,1,637534209,0,2,20,0,<.\main.c><main.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,88,0,0,0,116,0,0,0,52,3,0,0,232,1,0,0 }
OPTFFF 1,5,1,352321537,0,1,14,0,<.\start.c><start.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,88,0,0,0,116,0,0,0,52,3,0,0,232,1,0,0 }

ExtF <.\che.h> 6,18,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,160,0,0,0,229,1,0,0,252,255,255,255,226,255,255,255,23,0,0,0,18,0,0,0,239,2,0,0,133,1,0,0 }
ExtF <C:\KEIL\C51\INC\ATMEL\REG51.H> 1,13,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,0,0,0,0,0,0,0,0,230,2,0,0,62,1,0,0 }

TARGOPT 1, (Target 1)
 CLK51=24000000
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTBL 0,(Add on databooks)<DATASHTS\ADDBOOKS.PDF>
  OPTBL 1,(Data Sheet)<DATASHTS\ATMEL\AT89C4051_DS.PDF>
  OPTBL 2,(Instruction Set Manual)<DATASHTS\ATMEL\AT_C51ISM.PDF>
  OPTDL (S8051.DLL)()(DP51.DLL)(-px051)(S8051.DLL)()(TP51.DLL)(-px051)
  OPTDBG 44029,0,()()()()()()()()()() ()()()()
  OPTKEY 0,(DLGDP51)((98=-1,-1,-1,-1,0)(83=584,406,782,509,1)(85=586,255,784,358,1)(80=-1,-1,-1,-1,0)(91=-1,-1,-1,-1,0)(92=-1,-1,-1,-1,0))
  OPTPA 0,(key_scan)
  OPTPA 1,(main)
  OPTPA 2,(start)
  OPTPA 3,(timer0_int)
  OPTPA 4,(zou_fa)
  OPTDF 0xC2
  OPTLE <>
  OPTLC <>
EndOpt