jian.fit.qmsg

1、 掌握VHDL的结构以及实例的编程； 2、 学会使用QuartusⅡ平台的开化； 3、 设计一个2位BCD码加法器。

{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Info: Average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "1 X55_Y0 X65_Y11 " "Info: Peak interconnect usage is 1% of the available device resources in the region that extends from location X55_Y0 to location X65_Y11" {  } {  } 0 0 "Peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "" 0}  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:01 " "Info: Fitter routing operations ending: elapsed time is 00:00:01" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0 "" 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0 "" 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0 "" 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0 0 "Started post-fitting delay annotation" 0 0 "" 0}
{ "Warning" "WDAT_NO_LOADING_SPECIFIED_ONE_OR_MORE_PINS" "58 " "Warning: Found 58 output pins without output pin load capacitance assignment" { { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "S0\[0\] 0 " "Info: Pin \"S0\[0\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "S0\[1\] 0 " "Info: Pin \"S0\[1\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "S0\[2\] 0 " "Info: Pin \"S0\[2\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "S0\[3\] 0 " "Info: Pin \"S0\[3\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "S1\[0\] 0 " "Info: Pin \"S1\[0\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "S1\[1\] 0 " "Info: Pin \"S1\[1\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "S1\[2\] 0 " "Info: Pin \"S1\[2\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "S1\[3\] 0 " "Info: Pin \"S1\[3\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "S2 0 " "Info: Pin \"S2\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y6\[0\] 0 " "Info: Pin \"y6\[0\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y6\[1\] 0 " "Info: Pin \"y6\[1\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y6\[2\] 0 " "Info: Pin \"y6\[2\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y6\[3\] 0 " "Info: Pin \"y6\[3\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y6\[4\] 0 " "Info: Pin \"y6\[4\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y6\[5\] 0 " "Info: Pin \"y6\[5\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y6\[6\] 0 " "Info: Pin \"y6\[6\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y5\[0\] 0 " "Info: Pin \"y5\[0\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y5\[1\] 0 " "Info: Pin \"y5\[1\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y5\[2\] 0 " "Info: Pin \"y5\[2\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y5\[3\] 0 " "Info: Pin \"y5\[3\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y5\[4\] 0 " "Info: Pin \"y5\[4\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y5\[5\] 0 " "Info: Pin \"y5\[5\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y5\[6\] 0 " "Info: Pin \"y5\[6\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y4\[0\] 0 " "Info: Pin \"y4\[0\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y4\[1\] 0 " "Info: Pin \"y4\[1\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y4\[2\] 0 " "Info: Pin \"y4\[2\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y4\[3\] 0 " "Info: Pin \"y4\[3\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y4\[4\] 0 " "Info: Pin \"y4\[4\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y4\[5\] 0 " "Info: Pin \"y4\[5\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y4\[6\] 0 " "Info: Pin \"y4\[6\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y3\[0\] 0 " "Info: Pin \"y3\[0\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y3\[1\] 0 " "Info: Pin \"y3\[1\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y3\[2\] 0 " "Info: Pin \"y3\[2\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y3\[3\] 0 " "Info: Pin \"y3\[3\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y3\[4\] 0 " "Info: Pin \"y3\[4\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y3\[5\] 0 " "Info: Pin \"y3\[5\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y3\[6\] 0 " "Info: Pin \"y3\[6\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y2\[0\] 0 " "Info: Pin \"y2\[0\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y2\[1\] 0 " "Info: Pin \"y2\[1\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y2\[2\] 0 " "Info: Pin \"y2\[2\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y2\[3\] 0 " "Info: Pin \"y2\[3\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y2\[4\] 0 " "Info: Pin \"y2\[4\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y2\[5\] 0 " "Info: Pin \"y2\[5\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y2\[6\] 0 " "Info: Pin \"y2\[6\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y1\[0\] 0 " "Info: Pin \"y1\[0\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y1\[1\] 0 " "Info: Pin \"y1\[1\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y1\[2\] 0 " "Info: Pin \"y1\[2\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y1\[3\] 0 " "Info: Pin \"y1\[3\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y1\[4\] 0 " "Info: Pin \"y1\[4\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y1\[5\] 0 " "Info: Pin \"y1\[5\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y1\[6\] 0 " "Info: Pin \"y1\[6\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y0\[0\] 0 " "Info: Pin \"y0\[0\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y0\[1\] 0 " "Info: Pin \"y0\[1\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y0\[2\] 0 " "Info: Pin \"y0\[2\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y0\[3\] 0 " "Info: Pin \"y0\[3\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y0\[4\] 0 " "Info: Pin \"y0\[4\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y0\[5\] 0 " "Info: Pin \"y0\[5\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "y0\[6\] 0 " "Info: Pin \"y0\[6\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0}  } {  } 0 0 "Found %1!d! output pins without output pin load capacitance assignment" 0 0 "" 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0 0 "Delay annotation completed successfully" 0 0 "" 0}
{ "Warning" "WFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE" "9 " "Warning: Following 9 pins have no output enable or a GND or VCC output enable - later changes to this connectivity may change fitting results" { { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "S0\[0\] a permanently enabled " "Info: Pin S0\[0\] has a permanently enabled output enable" {  } { { "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" { S0[0] } } } { "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "S0\[0\]" } } } } { "jian.vhd" "" { Text "H:/jian2/jian.vhd" 9 -1 0 } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { S0[0] } "NODE_NAME" } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { S0[0] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "S0\[1\] a permanently enabled " "Info: Pin S0\[1\] has a permanently enabled output enable" {  } { { "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" { S0[1] } } } { "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "S0\[1\]" } } } } { "jian.vhd" "" { Text "H:/jian2/jian.vhd" 9 -1 0 } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { S0[1] } "NODE_NAME" } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { S0[1] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "S0\[2\] a permanently enabled " "Info: Pin S0\[2\] has a permanently enabled output enable" {  } { { "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" { S0[2] } } } { "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "S0\[2\]" } } } } { "jian.vhd" "" { Text "H:/jian2/jian.vhd" 9 -1 0 } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { S0[2] } "NODE_NAME" } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { S0[2] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "S0\[3\] a permanently enabled " "Info: Pin S0\[3\] has a permanently enabled output enable" {  } { { "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" { S0[3] } } } { "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "S0\[3\]" } } } } { "jian.vhd" "" { Text "H:/jian2/jian.vhd" 9 -1 0 } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { S0[3] } "NODE_NAME" } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { S0[3] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "S1\[0\] a permanently enabled " "Info: Pin S1\[0\] has a permanently enabled output enable" {  } { { "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" { S1[0] } } } { "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "S1\[0\]" } } } } { "jian.vhd" "" { Text "H:/jian2/jian.vhd" 9 -1 0 } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { S1[0] } "NODE_NAME" } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { S1[0] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "S1\[1\] a permanently enabled " "Info: Pin S1\[1\] has a permanently enabled output enable" {  } { { "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" { S1[1] } } } { "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "S1\[1\]" } } } } { "jian.vhd" "" { Text "H:/jian2/jian.vhd" 9 -1 0 } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { S1[1] } "NODE_NAME" } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { S1[1] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "S1\[2\] a permanently enabled " "Info: Pin S1\[2\] has a permanently enabled output enable" {  } { { "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" { S1[2] } } } { "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "S1\[2\]" } } } } { "jian.vhd" "" { Text "H:/jian2/jian.vhd" 9 -1 0 } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { S1[2] } "NODE_NAME" } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { S1[2] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "S1\[3\] a permanently enabled " "Info: Pin S1\[3\] has a permanently enabled output enable" {  } { { "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" { S1[3] } } } { "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "S1\[3\]" } } } } { "jian.vhd" "" { Text "H:/jian2/jian.vhd" 9 -1 0 } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { S1[3] } "NODE_NAME" } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { S1[3] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "S2 a permanently enabled " "Info: Pin S2 has a permanently enabled output enable" {  } { { "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" { S2 } } } { "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "S2" } } } } { "jian.vhd" "" { Text "H:/jian2/jian.vhd" 10 -1 0 } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { S2 } "NODE_NAME" } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { S2 } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0}  } {  } 0 0 "Following %1!d! pins have no output enable or a GND or VCC output enable - later changes to this connectivity may change fitting results" 0 0 "" 0}
{ "Warning" "WFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN" "3 " "Warning: Following 3 pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" { { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "y6\[1\] GND " "Info: Pin y6\[1\] has GND driving its datain port" {  } { { "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" { y6[1] } } } { "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "y6\[1\]" } } } } { "jian.vhd" "" { Text "H:/jian2/jian.vhd" 39 -1 0 } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { y6[1] } "NODE_NAME" } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { y6[1] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "y6\[2\] GND " "Info: Pin y6\[2\] has GND driving its datain port" {  } { { "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" { y6[2] } } } { "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "y6\[2\]" } } } } { "jian.vhd" "" { Text "H:/jian2/jian.vhd" 39 -1 0 } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { y6[2] } "NODE_NAME" } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { y6[2] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "y6\[6\] VCC " "Info: Pin y6\[6\] has VCC driving its datain port" {  } { { "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "e:/quartus/altera/72/quartus/bin/pin_planner.ppl" { y6[6] } } } { "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "e:/quartus/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "y6\[6\]" } } } } { "jian.vhd" "" { Text "H:/jian2/jian.vhd" 39 -1 0 } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { y6[6] } "NODE_NAME" } } { "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/quartus/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { y6[6] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0}  } {  } 0 0 "Following %1!d! pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" 0 0 "" 0}
{ "Warning" "WFIOMGR_RESERVE_ASSIGNMENT_FOR_UNUSED_PINS_IS_DEFAULT" "As output driving ground " "Warning: The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'." {  } {  } 0 0 "The Reserve All Unused Pins setting has not been specified, and will default to '%1!s!'." 0 0 "" 0}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "H:/jian2/jian.fit.smsg " "Info: Generated suppressed messages file H:/jian2/jian.fit.smsg" {  } {  } 0 0 "Generated suppressed messages file %1!s!" 0 0 "" 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 6 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "215 " "Info: Allocated 215 megabytes of memory during processing" {  } {  } 0 0 "Allocated %1!s! megabytes of memory during processing" 0 0 "" 0} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jun 19 02:29:52 2008 " "Info: Processing ended: Thu Jun 19 02:29:52 2008" {  } {  } 0 0 "Processing ended: %1!s!" 0 0 "" 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:35 " "Info: Elapsed time: 00:00:35" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0 "" 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "" 0}