📄 clock.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.0 9/14/2000
-- Compiled: 06/10/2008 14:20:42
-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "clock"
BEGIN
DEVICE = "EP1K30QC208-3";
"adjust" : INPUT_PIN = 69 ;
"clk1HZ" : INPUT_PIN = 70 ;
"clk2HZ" : INPUT_PIN = 71 ;
"mode" : INPUT_PIN = 68 ;
"reset" : INPUT_PIN = 173 ;
"vcc" : INPUT_PIN = 187 ;
"cout24" : OUTPUT_PIN = 193 ;
"en0" : OUTPUT_PIN = 94 ;
"en1" : OUTPUT_PIN = 95 ;
"en2" : OUTPUT_PIN = 96 ;
"en3" : OUTPUT_PIN = 97 ;
"en4" : OUTPUT_PIN = 37 ;
"en5" : OUTPUT_PIN = 160 ;
"hh0" : OUTPUT_PIN = 161 ;
"hh1" : OUTPUT_PIN = 162 ;
"hh2" : OUTPUT_PIN = 163 ;
"hh3" : OUTPUT_PIN = 164 ;
"hh4" : OUTPUT_PIN = 166 ;
"hh5" : OUTPUT_PIN = 167 ;
"hh6" : OUTPUT_PIN = 168 ;
"hl0" : OUTPUT_PIN = 25 ;
"hl1" : OUTPUT_PIN = 26 ;
"hl2" : OUTPUT_PIN = 27 ;
"hl3" : OUTPUT_PIN = 28 ;
"hl4" : OUTPUT_PIN = 29 ;
"hl5" : OUTPUT_PIN = 30 ;
"hl6" : OUTPUT_PIN = 31 ;
"mh0" : OUTPUT_PIN = 148 ;
"mh1" : OUTPUT_PIN = 147 ;
"mh2" : OUTPUT_PIN = 144 ;
"mh3" : OUTPUT_PIN = 143 ;
"ml0" : OUTPUT_PIN = 142 ;
"ml1" : OUTPUT_PIN = 141 ;
"ml2" : OUTPUT_PIN = 140 ;
"ml3" : OUTPUT_PIN = 139 ;
"sh0" : OUTPUT_PIN = 136 ;
"sh1" : OUTPUT_PIN = 135 ;
"sh2" : OUTPUT_PIN = 134 ;
"sh3" : OUTPUT_PIN = 133 ;
"sl0" : OUTPUT_PIN = 132 ;
"sl1" : OUTPUT_PIN = 131 ;
"sl2" : OUTPUT_PIN = 128 ;
"sl3" : OUTPUT_PIN = 127 ;
"|count24:G2|LPM_ADD_SUB:115|addcore:adder|:55" : LOCATION = LC5_D11;
"|count24:G2|LPM_ADD_SUB:144|addcore:adder|:55" : LOCATION = LC5_D26;
"|count24:G2|LPM_ADD_SUB:144|addcore:adder|:59" : LOCATION = LC1_D26;
"|count24:G2|:12" : LOCATION = LC2_D11; -- |count24:G2|yh3
"|count24:G2|:13" : LOCATION = LC3_D11; -- |count24:G2|yh2
"|count24:G2|:14" : LOCATION = LC1_D11; -- |count24:G2|yh1
"|count24:G2|:15" : LOCATION = LC6_D26; -- |count24:G2|yh0
"|count24:G2|:16" : LOCATION = LC3_D26; -- |count24:G2|yl3
"|count24:G2|:17" : LOCATION = LC7_D26; -- |count24:G2|yl2
"|count24:G2|:18" : LOCATION = LC4_D26; -- |count24:G2|yl1
"|count24:G2|:19" : LOCATION = LC2_D33; -- |count24:G2|yl0
"|count24:G2|:77" : LOCATION = LC2_D26;
"|count24:G2|:82" : LOCATION = LC7_D22;
"|count24:G2|:162" : LOCATION = LC7_D11;
"|count24:G2|:174" : LOCATION = LC6_D11;
"|count24:G2|:183" : LOCATION = LC8_D11;
"|count24:G2|~276~1" : LOCATION = LC8_D26;
"|count60:G3|LPM_ADD_SUB:115|addcore:adder|:55" : LOCATION = LC6_B2 ;
"|count60:G3|LPM_ADD_SUB:144|addcore:adder|:55" : LOCATION = LC4_B6 ;
"|count60:G3|LPM_ADD_SUB:144|addcore:adder|:59" : LOCATION = LC8_B6 ;
"|count60:G3|:12" : LOCATION = LC5_B2 ; -- |count60:G3|yh3
"|count60:G3|:13" : LOCATION = LC8_B2 ; -- |count60:G3|yh2
"|count60:G3|:14" : LOCATION = LC1_B1 ; -- |count60:G3|yh1
"|count60:G3|:15" : LOCATION = LC2_B6 ; -- |count60:G3|yh0
"|count60:G3|:16" : LOCATION = LC3_B6 ; -- |count60:G3|yl3
"|count60:G3|:17" : LOCATION = LC5_B6 ; -- |count60:G3|yl2
"|count60:G3|:18" : LOCATION = LC6_B6 ; -- |count60:G3|yl1
"|count60:G3|:19" : LOCATION = LC7_B6 ; -- |count60:G3|yl0
"|count60:G3|~77~1" : LOCATION = LC1_B2 ;
"|count60:G3|:82" : LOCATION = LC1_B6 ;
"|count60:G3|:162" : LOCATION = LC7_B2 ;
"|count60:G3|:174" : LOCATION = LC4_B2 ;
"|count60:G3|:183" : LOCATION = LC8_B1 ;
"|count60:G3|~252~1" : LOCATION = LC3_B2 ;
"|count60:G4|LPM_ADD_SUB:115|addcore:adder|:55" : LOCATION = LC2_C3 ;
"|count60:G4|LPM_ADD_SUB:144|addcore:adder|:55" : LOCATION = LC2_C7 ;
"|count60:G4|LPM_ADD_SUB:144|addcore:adder|:69" : LOCATION = LC4_C7 ;
"|count60:G4|:12" : LOCATION = LC1_C3 ; -- |count60:G4|yh3
"|count60:G4|:13" : LOCATION = LC3_C16; -- |count60:G4|yh2
"|count60:G4|:14" : LOCATION = LC4_C16; -- |count60:G4|yh1
"|count60:G4|:15" : LOCATION = LC8_C16; -- |count60:G4|yh0
"|count60:G4|:16" : LOCATION = LC6_C7 ; -- |count60:G4|yl3
"|count60:G4|:17" : LOCATION = LC8_C7 ; -- |count60:G4|yl2
"|count60:G4|:18" : LOCATION = LC1_C7 ; -- |count60:G4|yl1
"|count60:G4|:19" : LOCATION = LC3_C7 ; -- |count60:G4|yl0
"|count60:G4|:82" : LOCATION = LC5_C7 ;
"|count60:G4|:162" : LOCATION = LC3_C3 ;
"|count60:G4|:174" : LOCATION = LC7_C16;
"|count60:G4|:183" : LOCATION = LC5_C16;
"|count60:G4|:395" : LOCATION = LC1_C16;
"|count60:G4|~395~1" : LOCATION = LC2_C16;
"|decode4_7:G5|:351" : LOCATION = LC2_D5 ;
"|decode4_7:G5|:363" : LOCATION = LC6_D5 ;
"|decode4_7:G5|~368~1" : LOCATION = LC4_D11;
"|decode4_7:G5|:375" : LOCATION = LC5_D5 ;
"|decode4_7:G5|:380" : LOCATION = LC4_D4 ;
"|decode4_7:G5|:413" : LOCATION = LC8_D5 ;
"|decode4_7:G5|:440" : LOCATION = LC7_D5 ;
"|decode4_7:G5|:446" : LOCATION = LC5_D6 ;
"|decode4_7:G5|:465" : LOCATION = LC1_D5 ;
"|decode4_7:G5|:479" : LOCATION = LC6_D6 ;
"|decode4_7:G5|:501" : LOCATION = LC4_D5 ;
"|decode4_7:G5|:512" : LOCATION = LC2_D8 ;
"|decode4_7:G5|:536" : LOCATION = LC3_D5 ;
"|decode4_7:G5|:545" : LOCATION = LC1_D8 ;
"|decode4_7:G5|:576" : LOCATION = LC2_D10;
"|decode4_7:G6|:380" : LOCATION = LC4_D22;
"|decode4_7:G6|:413" : LOCATION = LC1_D22;
"|decode4_7:G6|:446" : LOCATION = LC2_D22;
"|decode4_7:G6|:479" : LOCATION = LC3_D22;
"|decode4_7:G6|:512" : LOCATION = LC8_D22;
"|decode4_7:G6|:545" : LOCATION = LC5_D22;
"|decode4_7:G6|:576" : LOCATION = LC6_D22;
"|mode_adjust:G1|:19" : LOCATION = LC1_B8 ; -- |mode_adjust:G1|c_state1
"|mode_adjust:G1|:20" : LOCATION = LC2_B8 ; -- |mode_adjust:G1|c_state0
"|mode_adjust:G1|:537" : LOCATION = LC7_B8 ;
"|mode_adjust:G1|:545" : LOCATION = LC5_B8 ;
"|mode_adjust:G1|:580" : LOCATION = LC5_B1 ;
"|mode_adjust:G1|:592" : LOCATION = LC7_B1 ;
"|mode_adjust:G1|:604" : LOCATION = LC6_B1 ;
"|mode_adjust:G1|~616~1" : LOCATION = LC2_B10;
"|mode_adjust:G1|:725" : LOCATION = LC2_B1 ;
"|mode_adjust:G1|:731" : LOCATION = LC4_B1 ;
"|mode_adjust:G1|:737" : LOCATION = LC3_B1 ;
"|mode_adjust:G1|:743" : LOCATION = LC1_B10;
"|mode_adjust:G1|:749" : LOCATION = LC4_B10;
"|mode_adjust:G1|:755" : LOCATION = LC4_B8 ;
"|mode_adjust:G1|:761" : LOCATION = LC8_B8 ;
"|mode_adjust:G1|:767" : LOCATION = LC3_B3 ;
"|mode_adjust:G1|:773" : LOCATION = LC2_B3 ;
"|mode_adjust:G1|:779" : LOCATION = LC3_B8 ;
"|mode_adjust:G1|:785" : LOCATION = LC6_B8 ;
":64" : LOCATION = LC2_B2 ;
":66" : LOCATION = LC6_C16;
END;
INTERNAL_INFO "clock"
BEGIN
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -