mode_adjust.fit

1．6个数码管静态显示驱动 2．按键模式选择(时分秒)与调整控制 3．用硬件描述语言(或混合原理图)设计时、分、秒计数器模块、按键控制状态机模块、显示译码模块、顶层模块。要求使用实验箱右下角的6个

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 05/26/2008 10:35:54      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "mode_adjust"
BEGIN

    DEVICE = "EP1K30QC208-3";

    "adjust"                       : INPUT_PIN  = 184    ;
    "clk1HZ"                       : INPUT_PIN  = 182    ;
    "clk2HZ"                       : INPUT_PIN  = 80     ;
    "mode"                         : INPUT_PIN  = 79     ;
    "reset"                        : INPUT_PIN  = 78     ;
    "clkh"                         : OUTPUT_PIN = 8      ;
    "clkm"                         : OUTPUT_PIN = 147    ;
    "clks"                         : OUTPUT_PIN = 173    ;
    "en0"                          : OUTPUT_PIN = 149    ;
    "en1"                          : OUTPUT_PIN = 87     ;
    "en2"                          : OUTPUT_PIN = 148    ;
    "en3"                          : OUTPUT_PIN = 7      ;
    "en4"                          : OUTPUT_PIN = 10     ;
    "en5"                          : OUTPUT_PIN = 11     ;
    "hin"                          : OUTPUT_PIN = 174    ;
    "min"                          : OUTPUT_PIN = 9      ;
    ":19"                          : LOCATION   = LC7_A14;  -- c_state1
    ":20"                          : LOCATION   = LC5_A14;  -- c_state0
    ":537"                         : LOCATION   = LC8_A14;
    ":545"                         : LOCATION   = LC3_A14;
    ":580"                         : LOCATION   = LC1_A6 ;
    ":592"                         : LOCATION   = LC1_A13;
    ":604"                         : LOCATION   = LC4_A13;
    "~606~1"                       : LOCATION   = LC2_A13;
    ":725"                         : LOCATION   = LC2_A6 ;
    ":731"                         : LOCATION   = LC8_A6 ;
    ":737"                         : LOCATION   = LC6_A13;
    ":743"                         : LOCATION   = LC3_A13;
    ":749"                         : LOCATION   = LC8_A13;
    ":755"                         : LOCATION   = LC6_A14;
    ":761"                         : LOCATION   = LC1_A14;
    ":767"                         : LOCATION   = LC5_A13;
    ":773"                         : LOCATION   = LC7_A13;
    ":779"                         : LOCATION   = LC2_A14;
    ":785"                         : LOCATION   = LC4_A14;

END;

INTERNAL_INFO "mode_adjust"
BEGIN
	DEVICE = EP1K30QC208-3;
    OD0P184 : LORAX = "1:FB0|2:FH0R0|3:PA7R0C5->LC1_A6|,3:PA7R0C12->LC1_A13,->LC4_A13|||";
    OD1P182 : LORAX = "1:FB1|2:FH1R0|3:PA12R0C5->LC1_A6|,3:PA12R0C12->LC1_A13,->LC4_A13|||";
    OD3P80  : LORAX = "1:FB3|2:FH3R0|3:PA8R0C12->LC3_A13,->LC8_A13,->LC5_A13,->LC7_A13|,3:PA8R0C13->LC6_A14,->LC1_A14|||";
    OD5P79  : LORAX = "1:FB5->LC7_A14,->LC5_A14|";
    OD2P78  : LORAX = "1:FB2|2:FH2R0|3:PA6R0C5->LC2_A6,->LC8_A6|,3:PA6R0C12->LC6_A13,->LC3_A13,->LC8_A13,->LC5_A13,->LC7_A13|,3:PA6R0C13->LC7_A14,->LC5_A14,->LC6_A14,->LC1_A14,->LC2_A14,->LC4_A14|||";
    LC7_A14 : LORAX = "1:MSW6R0C13,HHL45R0|2:PA14R0C5->LC1_A6|,2:PA14R0C12->LC1_A13,->LC4_A13,->LC2_A13||";
    LC5_A14 : LORAX = "1:MSW4R0C13,HHL49R0|2:PA13R0C5->LC1_A6|,2:PA13R0C12->LC1_A13,->LC4_A13,->LC2_A13||";
    LC3_A14 : LORAX = "1:MSW3R0C12,HHL15R0,PA4R0C12->LC5_A13,->LC7_A13|";
    LC1_A13 : LORAX = "1:MSW0R0C12,HHL30R0,PA8R0C5->LC8_A6|";
    LC2_A6  : LORAX = "1:MSW2R0C4,G34R0->OH2R0P8|";
    LC8_A6  : LORAX = "1:MSW7R0C5,HHL54R0->OH15R0P147|";
    LC6_A13 : LORAX = "1:MSW5R0C12,V15C12->OV0C12P173|";
    LC3_A13 : LORAX = "1:MSW2R0C13,HHL8R0->OH10R0P149|";
    LC8_A13 : LORAX = "1:MSW7R0C13,V22C13->OV2C13P87|";
    LC6_A14 : LORAX = "1:MSW5R0C13,HHL40R0->OH13R0P148|";
    LC1_A14 : LORAX = "1:MSW0R0C13,G64R0->OH0R0P7|";
    LC5_A13 : LORAX = "1:MSW4R0C12,G102R0->OH4R0P10|";
    LC7_A13 : LORAX = "1:MSW6R0C12,G141R0->OH6R0P11|";
    LC2_A14 : LORAX = "1:MSW1R0C13,V4C13->OV1C13P174|";
    LC4_A14 : LORAX = "1:MSW3R0C13,G9R0->OH3R0P9|";
	LC7_A14 : LORAX2 = "X, OD2P78, LC5_A14, LC7_A14";
	LC5_A14 : LORAX2 = "OD2P78, LC8_A14, LC7_A14, LC5_A14";
	LC8_A14 : LORAX2 = "X, X, LC5_A14, LC7_A14";
	LC3_A14 : LORAX2 = "X, X, LC5_A14, LC7_A14";
	LC1_A6  : LORAX2 = "OD0P184, OD1P182, LC5_A14, LC7_A14";
	LC1_A13 : LORAX2 = "OD0P184, OD1P182, LC5_A14, LC7_A14";
	LC4_A13 : LORAX2 = "OD1P182, OD0P184, LC5_A14, LC7_A14";
	LC2_A13 : LORAX2 = "X, X, LC5_A14, LC7_A14";
	LC2_A6  : LORAX2 = "X, OD2P78, LC1_A6, LC2_A6";
	LC8_A6  : LORAX2 = "X, OD2P78, LC1_A13, LC8_A6";
	LC6_A13 : LORAX2 = "X, OD2P78, LC4_A13, LC6_A13";
	LC3_A13 : LORAX2 = "OD2P78, OD3P80, LC2_A13, LC3_A13";
	LC8_A13 : LORAX2 = "OD2P78, OD3P80, LC8_A13, LC2_A13";
	LC6_A14 : LORAX2 = "OD2P78, OD3P80, LC8_A14, LC6_A14";
	LC1_A14 : LORAX2 = "OD2P78, OD3P80, LC1_A14, LC8_A14";
	LC5_A13 : LORAX2 = "OD2P78, OD3P80, LC3_A14, LC5_A13";
	LC7_A13 : LORAX2 = "OD2P78, OD3P80, LC7_A13, LC3_A14";
	LC2_A14 : LORAX2 = "OD2P78, LC5_A14, LC7_A14, LC2_A14";
	LC4_A14 : LORAX2 = "OD2P78, LC5_A14, LC7_A14, LC4_A14";
END;